===================== Product Identification =====================
MSDS NAME:URALITE 3156 AMBER,PART A
NIIN:00N003996
Kit Part:Y
MSDS Number: BCLJT
=== Responsible Party ===
Company:HEXCEL CORPORATION
Address:20701 NORDHOFF STREET
Box:2197
City:CHATSWORTH
State:CA
ZIP:91311
Country:US
Info Phone Num:800-433-5072; 510-847-9500
Emergency Phone Num:818-882-3022
Preparer's Name:P W CUTHBERT
CAGE:01490
=== Contractor Identification ===
Company:HEXCEL CORPORATION;CHEMICAL PRODUCTS DIVISION
Address:20701-NORDHOFF STREET
Box:2197
City:CHATSWORTH
State:CA
ZIP:91311-5924
Country:US
Phone:818-882-3022
CAGE:01490
============= Composition/Information on Ingredients =============
Name:ISOCYANIC ACID, METHYLENE DI-4,1-CYCLOHEXYLENE ESTER;
(METHYLENE BIS (4-CYCLOHEXYL) ISOCYANATE) (HMDI)
CAS:5124-30-1
RTECS #:NQ9250000
Fraction by Wt: 14-28%
OSHA PEL:0.01 PPM, C, S
ACGIH TLV:0.005 PPM
Name:POLYPROPYLENE-POLYETHYLENE POLYGLYCOL/HMDI POLYMER
CAS:68310-52-1
Fraction by Wt: 70-85%
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:STRONG IRRITANT & SENSITIZER. CAN
CAUSE DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE, SKIN,
RESPIRATORY, LIVER, KIDNEY, SPLEEN & BLADDER DISORDERS MAY BE
AGGRAVATED BY EXPOSURE TO THIS PRODUCT.
======================= First Aid Measures =======================
First Aid:SKIN:PROMPT WASHING W/SOAP & WATER. INGEST:CALL MD AT ONCE.
INDUCE VOMITING UPON ADVICE OF A MD. EYES:FLUSH PROMPTLY W/CLEAR
WATER FOR AT LEAST 15 MINS. CALL MD. INHAL:TREAT SYMPTOMATICALLY;
VASO-DILA TOR, FRESH AIR, OXYGEN. CALL MD.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:302F,150C
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL FOR SMALL FIRES.
WATER & FOAM FOR LARGE FIRES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . VAPORS ARE EXCEEDINGLY IRRITATING WHEN
INHALED.
Unusual Fire/Explosion Hazard:NONE.
================== Accidental Release Measures ==================
Spill Release Procedures:VENTILATE AREA THOROUGHLY. SPILLED COMPOUND
SHOULD BE ABSORBED IN SAWDUST OR OTHER ABSORBANT. STORE TEMPORARILY
IN AN OPEN CONTAINER. PART A,SHOULD BE TREATED WITH A SOLUTION OF
WATER,AMMONIA & ISOPRO PANOL BEFORE DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL,DRY AREA IN TIGHTLY
CLOSED CONTAINERS.
Other Precautions:AVOID CONTACT W/SKIN, EYES OR CLOTHING. CONTAMINATED
CLOTHING MUST BE LAUNDERED BEFORE WEARING. CONTAMINATED SHOES MUST
BE THOROUGHLY CLEANED OR DISCARDED. DO NOT BREATHE VAPORS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT NEEDED IN NORMAL APPLICATIONS. IN CASE OF
NEED, NIOSH/MSHA APPRVD AIR SUPPLIED MASK OR RESPIRATOR W/CANNISTER
FOR ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST IF HANDLED INDOORS, PROVIDE MECHANICAL
EXHAUST VENTILATION. MECHANICAL (GENERAL) PREFERRED.
Protective Gloves:RUBBER OR NEOPRENE GLOVES.
Eye Protection:CHEM WORK GOG & FULL LNGTH FSHLD .
Other Protective Equipment:RUBBER OR PLACTIC COVERALLS OR APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VP:<0.0005 @ 75F
================== Physical/Chemical Properties ==================
Vapor Pres:SUPP DATA
Spec Gravity:1.056 (H*2O=1)
Evaporation Rate & Reference:ESSENTIALLY NON-VOLATILE
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT AMBER; FAINTLY SWEET ODOR.
Percent Volatiles by Volume:<0.15
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
WATER,ALCOHOLS,STRONG BASES,METAL COMPDS,SURFACE ACTIVE MATS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Conditions to Avoid Polymerization:MOISTURE CONTAMINATION MAY FORM CO*2
GAS PRESSURE.
==================== Disposal Considerations ====================
Waste Disposal Methods:CONTROLLED INCINERATION OR BURIED LANDFILL WASTE
DISPOSAL SHOULD BE IN ACCORDANCE W/FEDERAL, STATE & LOCAL
ENVIRONMENTAL CONTROL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|