MSDS   : 862 DIPKOOL CAS   : NAME   : water soluble synthetic coolant,cutting fluid.
===================== Product Identification =====================
MSDS NAME:862 DIPKOOL
NIIN:00N003953
MSDS Number: BCLGL
=== Responsible Party ===
Company:DIPCO INCORPORATED
Emergency Phone Num:415-893-6375
CAGE:6B712
=== Contractor Identification ===
Company:DIPCO INCORPORATED
CAGE:6B712
============= Composition/Information on Ingredients =============
Name:WATER SOLUBLE SYNTHETIC COOLANT,CUTTING FLUID.
Fraction by Wt: 100%
===================== Hazards Identification =====================
Effects of Overexposure:EYE/SKIN: IRRITATION
======================= First Aid Measures =======================
First Aid:EYE: FLUSH WITH WATER 15 MINUTES,SEE PHYSICIAN IF IRRITATION
PERSISTS. SKIN: WASH WITH SOAP AND WATER.
===================== Fire Fighting Measures =====================
Extinguishing Media:CO*2,DRY CHEMICAL,FOAM.
Fire Fighting Procedures:NONE (MFR)
Unusual Fire/Explosion Hazard:NONE (MFR)
================== Accidental Release Measures ==================
Spill Release Procedures:CONTAIN SPILL AND ALLOW TO EVAPORATE. SOAK UP
WITH SUITABLE ABSORBENT MATERIAL,I.E. SAWDUST,OIL SOAK,OR SAND.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 150F/65C. NORMAL
PRECAUTIONS SHOULD BE OBSERVED WHEN HANDLING MATERIALS OF THIS
TYPE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:MECHANICAL
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES/GOGGLES
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:212F/100C
Spec Gravity:1.045
Evaporation Rate & Reference:1 (ETHER)
Solubility in Water:COMPLETE
Appearance and Odor:TRANSPARENT BLUE,LIQUID,MILD ODOR.
Percent Volatiles by Volume:63.9
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:NOT DETERMINED (MFR)
==================== Disposal Considerations ====================
Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD ***
ALL PAGES On Chemical Property IN THIS GROUP
NAME CAS
CRC ZINC IT (AEROSOL)
75-09-2 108-88-3 78-93-3 7440-66-6
CRC ZINC RE NU (AEROSOL)
75-09-2 108-88-3 78-93-3 7440-66-6
FREESTO; 9523285-1
1332-58-7
FREESTO; 9523286-1
1332-58-7
326Y 68000, PT A (PT B 1S VG-Y-511)
8002-05-9
CHLORINE
7782-50-5
LAMINAR X-500 LIGHT STABLE TEFLON GRAY
111-15-9 123-86-4 78-93-3 108-88-3
LAMINAR X-500 LIGHT STABLE HARDENER 10-C-81
822-06-0 111-15-9 1330-20-7
HILTI SPRAY LUBRICANT
75-09-2
GRIME-GO
25155-30-0
862 DIPKOOL
868 DIPKOOL
132 ASBESTOS TAPE
12001-29-5
DUNSPAR MARINE SPAR VARNISH V65
8030-30-6 138-86-3
22-S CLEAR SEALER/LACQUER
111-15-9 111-76-2 108-10-1 108-88-3 1330-20-7
NBC
13927-77-0
TETRONE A
120-54-7
THIONEX
97-74-5
LIQUID CARPET
9016-00-6 7732-18-5
2131 & 2341,I.M. SEMI-GLOSS ENAMEL
8030-30-6
RUB-R-SHEEN #0931
V-26,POLYURETHANE GLOSS VARNISH
8030-30-6
431W GLOSS FINISH WHITE PAINT
8030-30-6
UNI-PRIME LATEX PRIME & FINISH, 3172
107-21-1
3021W DUNPRIDE WHITE
62-38-4 107-21-1
3011,BLACK HOUSE PAINT
7732-18-5 7439-97-6
2700 SERIES,ACRYLIC LATEX EXTERIOR HOUSE PT
7732-18-5 7439-97-6
MOLY HI-TEMP
1317-33-5
848 LOTION FOAM
99-76-3
SEP-GUARD 1518
64-02-8 3380-34-5
VENTOMATIC INSECTICIDE II
8003-34-7 51-03-6
RPA 2
91-60-1 8002-74-2
CARRIAGE CONTROL TAPE ADHESIVE, 419012
71-55-6 1314-13-2 1309-48-4
HALOCARBON 56S OIL
EPOWELD 7774-A (XL)
EPOWELD 7774-B (XL)
VINYL-LUX PRIMEWASH (MFR ID 353/354).
110-80-5 13530-65-9 108-10-1 78-93-3 67-63-0
VINYLUX P W BASE 353 (NEW FORMULA)
64-17-5 67-63-0 108-10-1 67-63-0
VINYLUX P W REDUCER 354 (NEW FORMULA)
107-98-2 67-63-0 7664-38-2
IT X, IT 3X, IT 5X, IT FT, IT 325.
INDUSTRIAL TALC
NYTAL 200, NYTAL 300, NYTAL 400.
BLACO-TRON TCM
287-92-3 354-58-5 75-09-2
CATALYST OR INITIATOR.
78-67-1 7732-18-5
ETCHANT 826
7664-93-9 7738-94-5 7732-18-5
T-120-66 THINNER
71-36-3 67-63-0
UNADS
97-74-5
URALITE 3152,PART A.
5124-30-1 68310-52-1 110-80-5
URALITE 3152, PART B
101-77-9 25214-70-4 69178-40-1 872-50-4
URALITE 3156 AMBER,PART A
5124-30-1 68310-52-1