===================== Product Identification =====================
MSDS NAME:SULFAMIC ACID,8049
NIIN:00F035162
MSDS Number: BTKLM
=== Responsible Party ===
Company:CUSTOM BUILDING PRODUCTS,INC
Address:6511 SALT LAKE AVE
City:BELL
State:CA
ZIP:90201
Country:US
Info Phone Num:213-582-0846
Emergency Phone Num:213-582-0846
Preparer's Name:STEVE TAYLOR
CAGE:CUSTO
=== Contractor Identification ===
Company:CUSTOM BUILDING PRODUCTS
Address:6511 SALT LAKE AVE.
City:BELL
State:CA
ZIP:90201
Country:US
Phone:213-582-0846
CAGE:CUSTO
============= Composition/Information on Ingredients =============
Name:SULFAMIC ACID
CAS:5329-14-6
RTECS #:WO5950000
Fraction by Wt: 97%
Other REC Limits:NONE RECOMMENDED
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50, RATS, ORAL IS 3160 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES/SKIN: IRRITANT TO EYES,
SKIN AND MUCOUS MEMBRANES. INHALATION: IRRITANT TO MUCOUS MEMBRANES
AND RESPIRATORY SYSTEM. INGESTION: IRRITANT TO MUCOUS MEMBRANES AND
DIGESTIVE TRACT. CHRONIC: NO T KNOWN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION. INHALATION:
IRRITATION OF MUCOUS MEMBRANES AND RESPIRATORY TRACT. INGESTION:
IRRITATION OF MUSCOUS MEMBRANES AND DIGESTIVE TRACT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
Eyes: FLUSH WITH LARGE AMOUNTS OF WATER. IF IRRITATION
PERSISTS, GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH AREA WITH SOAP AND WATER. IF IRRITATION OCCURS, GET
MEDICAL ATTENTION. INHALATION: MOVE TO FRESH AIR. IF ADVERSE
SYMPTOMS DEVELOP, GET MEDICAL ATTENTION. INGESTION: GIVE LARGE
AMOUNTS OF WATER. GET MEDICAL ATTENTION.
===================== Fire Fighting Measures =====================
Extinguishing Media:WATER, FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND
FULL FACE-PIECE SCBA. COOL FIRE EXPOSED CONTAINERS WITH WATER
SPRAY. CONTAIN RUNOFF. WATER SOLUTION IS ACIDIC.
Unusual Fire/Explosion Hazard:SULFUR DIOXIDE AND SULFUR TRIOXIDE MAY BE
RELEASED DURING FIRE.
================== Accidental Release Measures ==================
Spill Release Procedures:SWEEP UP AND CONTAINERIZE DRY MATERIAL. FLUSH
SPILL AREA WITH WATER. DISOLVE AND NEUTRALIZE WITH SODIUM
CARBONATE.
Neutralizing Agent:DISSOLVE AND NEUTRALIZE WITH SODIUM CARBONATE.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL, DRY, WELL VENTILATED
AREA. PROTECT FROM PHYSICAL DAMAGE.
Other Precautions:NONE
============= Exposure Controls/Personal Protection =============
Respiratory Protection:THE SPECIFIC RESPIRATOR SELECTED MUST BE BASED
ON CONTAMINATION LEVELS FOUND IN THE WORK PLACE, MUST BE BASED ON
THE SPECIFIC OPERATION, MUST NOT EXCEED THE WORKING LIMITS OF THE
OF THE RESPIRATOR AND MUST BE APPROVED BY NIOSH-MSHA.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES TO AVOID SKIN CONTACT.
Eye Protection:TIGHT GOGGLES TO AVOID DUST EXPOSURE.
Other Protective Equipment:EYE WASH FOUNTAIN AND QUICK DRENCH SHOWER
WITHIN THE IMMEDIATE WORK AREA FOR EMERGENCY USE.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
THE MANUGFACTURER'S MSDS IS FOR SULFAMIC ACID. HOWEVER, SOME OF THE
HEALTH HAZARD DATA AND CONTROL MEASURES MENTION DATA FOR PORTLAND
CEMENT. THE MANUFACTURER'S MSDS DOES NOT CLARIFY THE RELATION OF S
ULFAMIC ACID AND PORTLAND CEMENT.
================== Physical/Chemical Properties ==================
HCC:C1
Boiling Pt:B.P. Text:408F,209C
Spec Gravity:2.126
Evaporation Rate & Reference:NOT VOLATILE
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE, CRYSTALLINE POWDER. ODORLESS.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NITRATE, NITRATES, CHLORITES, SULFIDES.
Stability Condition to Avoid:WARM, MOIST ENVIRONMENTS.
Hazardous Decomposition Products:SULFUR DIOXIDE, SULFUR TRIOXIDES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS. IF PEMITTED DISPOSE OF NEUTRALIZED WASTE
IN SEWER SYSTEM OR APPROVED FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|