===================== Product Identification =====================
MSDS NAME:CATALYST 11
NIIN:00-081-4333
Kit Part:Y
MSDS Number: BCXWX
=== Responsible Party ===
Company:GRACE W R & CO EMERSON & CUMING DEWEY & ALMY CHEM
Address:869 WASHINGTON ST
City:CANTON
State:MA
ZIP:02021-2513
Country:US
Info Phone Num:617-938-8630 OR 617-828-3300
Emergency Phone Num:617-935-4850
CAGE:04552
=== Contractor Identification ===
Company:GRACE W R & CO EMERSON & CUMING DEWEY & ALMY CHEM
Address:869 WASHINGTON ST
City:CANTON
State:MA
ZIP:02021-2513
Country:US
Phone:617-935-4850
CAGE:04552
Company:MCKEOWN ROBERT CO. INC.
Address:111 CHAMBERS BROOK RD.
Box:City:SOMERVILLE
State:NJ
ZIP:08876
Country:US
Phone:908-218-9000
Contract Num:SP0430-00-M-GC18
CAGE:7B953
============= Composition/Information on Ingredients =============
Name:M-PHENYLENEDIAMINE (SARA III)
CAS:106-50-3
RTECS #:SS8050000
Minumum % Wt:70.
Maxumum % Wt:80.
OSHA PEL:S, 0.1 MG/M3
ACGIH TLV:S, 0.1 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:N-METHYL PYRROLIDONE, CAS #872-50-4
CAS:872-50-4
RTECS #:UY5790000
Minumum % Wt:20.
Maxumum % Wt:30.
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CONTAINS MATERIALS SEVERLY IRRITATING
TO THE EYES. ALSO CAUSES MODERATE SKIN IRRITATION. PROLONGED OR
REPEATED EXPOSURE TO THE LIQUID MAY EXERT A DEFATTING OR DRYING
ACTION ON THE SKIN, POSSIBLY RESUL TING IN DERMATITIS. HEATING CAN
GENERATE VAPORS THAT MAY CAUSE RESPIRATORY IRRITATION, NAUSEA AND
HEADACHE. INHALATION HAZARD AT ROOM TEMPERATURE IS UNLIKELY, DUE TO
THE LOW VOLATILITY OF THIS PRODUCT . HARMFUL IF SWALLOWED.
Effects of Overexposure:EYE CONTACT: BLURRED VISION, BURNING SENSATION
AND TEARING. SKIN CONTACT: RASH, ITCHING, HIVES, SWELLING OF THE
EXTREMITIES. INHALED: TIGHTNESS OF THE CHEST, ASTHMA-LIKE SYMPTOMS,
RESPIRATORY DISTRESS .
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF AILMENTS
OR WITH A PRE-EXISTING DISEASE INVOLVING THE EYES, SKIN, OR
RESPIRATORY TRACT MAY BE AT INCREASED RISK FROM EXPOSURE.
======================= First Aid Measures =======================
First Aid:INHALATION:REMOVE TO FRESH AIR. RESUSCITATE IF NOT BREATHING.
GET MEDICAL ATTENTION. EYES:IMMEDIATELY FLUSH WITH PLENTY OF WATER
FOR 15 MINUTES HOLDING EYELIDS OPEN. GET MEDICAL ATTENTION.
SKIN:REMOVE CONTAMINATED CLOTHING. WASH WITH SOAP AND WATER. IF
IRRITATION PERSISTS, GET MEDICAL ADVICE. INGESTION:DO NOT INDUCE
VOMITING. GIVE NOTHING BY MOUTH IF UNCONSCIOUS. GET IMMEDIATE
MEDICAL ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:>93.3C, 200.F
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. EVACUATE AREA. COOL
FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.
================== Accidental Release Measures ==================
Spill Release Procedures:USE PROPER PERSONAL PROTECTION;CONTAIN FREE
MATERIAL IF POSSIBLE;USE SUITABLE INERT ABSORBENT MATERIAL AND
RECOVER FOR PROPER DISPOSAL IN AN APPROVED CONTAINER.
Neutralizing Agent:NOT APPLICABLE.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
AREA. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. PROTECT
CONTAINERS FROM PHYSICAL DAMAGE.
Other Precautions:USE VENTED OVEN WHEN CURING AT ELEVATED
TEMPERATURES;USE IN WELL VENTILATD AREA;USE RUBBER GLOVES & FACE
SHIELD WHEN HANDLNG;CATLST 11 IS POWERFUL DYE.KEEP CONTNRS TIGHTLY
CLOSD WHEN NOT USED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR AS REQUIRED
IF ABOVE PEL/TLV OR SCBA IN AN ENCLOSED AREA.
Ventilation:LOCAL/GENERAL TO MAINTAIN PEL/TLV.
Protective Gloves:NEOPRENE, NITRILE, OR NATURAL RUBBER
Eye Protection:SAFETY GOGGLES WITH OPTIONAL FACE SHIELD
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER,WORK
CLOTHING AND APRON AS REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. DO NOT WEAR CONTAMINATED CLOTHING OR
FOOTWEAR.
Supplemental Safety and Health
AVOID PROLONGED OR REPEATED EXPOSURE. DO NOT GET ON SKIN OR IN EYES. DO
NOT BREATHE VAPORS OR MISTS.
================== Physical/Chemical Properties ==================
HCC:T4
Vapor Pres:<1
Vapor Density:>1.0
Spec Gravity:1.12
Solubility in Water:COMPLETE
Appearance and Odor:BROWN TO DARK BROWN LIQUIDS; STRONG AMINE ODOR.
Percent Volatiles by Volume:NEGL
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRON OXIDERS, PEROXIDES, ACIDS, EPIOXIDES.
Stability Condition to Avoid:HEATING TO DECOMPOSITION
Hazardous Decomposition Products:CO, CO*2 OXIDES OF NITROGEN.
=================== Toxicological Information ===================
Toxicological Information:CHRONIC HEALTH EFFECTS: STUDIES WITH LAB TEST
ANIMALS THAT N-METHYL PYRROLIDONE MAY BE EMBRYOTOXIC BY THE ORAL
AND INTERPERITONEAL ROUTES. TERATOGENIC EFFECTS HAVE RESULTED ONLY
AT MATERNALLY TOXIC D OSAGE LEVELS. THESE EFFECTS WERE NOT REPORTED
AT DOSE LEVELS TOLERATED BY THE MOTHER. EXPERIENCE TO DATE HAS NOT
DEMONSTRATED TERATOGENIC EFFECTS IN HUMANS. M-PHENYLENE DIAMINE
MAY CAUSE LIVER AND K IDNEY EFFECTS AS A RESULT OF SHORT
INHALATION, INGESTION, OR SKIN EXPOSURES, BASED ON TESTS ON LAB
ANIMALS. THIS COMPOUND HAS BEEN DETERMINED TO CAUSE MUTAGENIC
CHANGES IN CULTURED BACTERIAL AND MAMMA LLAN CELLS.
==================== Disposal Considerations ====================
Waste Disposal Methods:CONSULT LOCAL AUTHORITIES.DISPOSAL MUST BE MADE
IN ACCORDANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND
REGULATIONS.
=================== MSDS Transport Information ===================
Transport Information:DOT: PHENYLENE DIAMINES, HAZARD CLASS 6.1,
UN1673, PG III.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
8030-00-081-2329 GR E,COLOR CODE PURPLE
| |
|
TB 1363D(CV)
| |
|
TB 1361D(C)
| |
|
GRADE B,YELLOW
| |
|
STA-LOK 800
| 79-41-4 |
|
TB 1363A(AV)
| |
|
TB 1363A(AV)
| |
|
TB 1361(A),RED,GRADE A
| |
|
GRADE A,RED
| |
|
GRADE AA,GREEN
| |
|
TB 1361B(AA)
| |
|
COBALT NITRATE
| 10141-05-6 |
|
CATALYST 11
| 106-50-3
872-50-4 |
|
CATALYST 9
| 112-57-2
112-24-3
4067-16-7 |
|
RTV-60, SILICONE RUBBER
| 78-10-4 |
|
P150F
| 1336-36-3 |
|
P6X9V3
| |
|
1041249
| 7440-48-4 |
|
MA-356E
| 7440-48-4 |
|
16962-5
| 1310-58-3 |
|
E90 R P3 EPOXY PRIMER-PART A
| 1330-20-7
110-80-5
7439-92-1
18540-29-9
67-56-1 |
|
V93 V P1 EPOXY PRIMER-PART B
| 110-80-5
108-10-1
1330-20-7 |
|
PRIMER COATING, EPOXY 724600
| 1330-20-7
1317-36-8
14808-60-7
1333-82-0
14807-96-6
112945-52-5
71-36-3
123-86-4 |
|
PRIMER COATING, EPOXY 724116
| 107-98-2
1330-20-7
71-36-3 |
|
CHARTERSOL 210-66
| |
|
VIBRA-CLEAN
| |
|
WATERLESS HAND CLEANER PASTE
| 7732-18-5 |
|
TRAFFIC BEADS, GLASS BEADS
| |
|
728-002
| 67-63-0 |
|
METAL PRETREATMENT,RESIN-ACID,MIL-C-8514C
| 13530-65-9
71-36-3
64-17-5
7664-38-2 |
|
PRIMER,PRETREATMENT COATING*
| 13530-65-9
64-17-5
7664-38-2 |
|
MIL-C-22750C EPOXY POLYAMIDE
| |
|
MIL C-22750C EPOXY POLYAMIDE
| |
|
1-1X-88 26081 GRAY MIL-C-22750C
| |
|
1-1X-45 #16081 GRAY
| |
|
1-1X-48 16473 GRAY MIL-C-22750C
| |
|
1-1X-32 #16081 GRAY
| |
|
PT-426/PT-428
| 71-36-3 |
|
EPOXY COATING, WHITE 17925 COMP I M1-036
| 78-93-3
107-98-2
123-86-4
1330-20-7
108-88-3 |
|
POLYAMID, COMP II UO-082
| 67-63-0
78-93-3 |
|
MIL-C-22750 EPOXY WHITE PART A
| 108-88-3
110-43-0 |
|
COATING, EPOXY, WHITE
| 108-88-3 |
|
EPOXY COATING, WHITE 17925 COMP I M1-036
| 108-88-3
108-65-6
78-93-3 |
|
POLYAMID, COMP II UO-082
| 78-93-3
67-63-0 |
|
MIL-C-22750 EPOXY(WHITE PART A
| 108-88-3 |
|
724-102 724-112
| 108-88-3
71-36-3
67-63-0
78-93-3
110-80-5 |
|
PRIMER COATING
| 7789-06-2
25068-38-6
108-88-3 |
|
02Y024,BASE,PART A,EPOXY.
| 78-93-3
123-86-4
7789-06-2
7758-97-6
108-88-3 |
|
02Y024,CATALYST,POLYAMIDE,PART B
| 123-86-4
71-36-3
67-63-0
108-88-3
78-93-3 |
|
EPOXY PRIMER CAT.MIL-P-23377D
| 1330-20-7 |
|
|