MSDS   : 1-1X-48 16473 GRAY MIL-C-22750C CAS   : NAME   : pigments catalyst vehicle solvents, unspecified additives
===================== Product Identification =====================
MSDS NAME:1-1X-48 16473 GRAY MIL-C-22750C
NIIN:00-082-2438
MSDS Number: BCXYD
=== Responsible Party ===
Company:ADVANCED COATINGS & CHEMICALS
Emergency Phone Num:213/ 579-6270
CAGE:3K685
=== Contractor Identification ===
Company:ADVANCED COATINGS & CHEMICALS
Address:4343 TEMPLE CITY BLVD
Box:City:TEMPLE CITY
State:CA
ZIP:91780-4229
Country:US
Phone:818-579-6270
CAGE:3K685
============= Composition/Information on Ingredients =============
Name:PIGMENTS
Fraction by Wt: 8.5%
Name:CATALYST
Fraction by Wt: 13.5%
Name:VEHICLE
Fraction by Wt: 18%
Name:SOLVENTS, UNSPECIFIED
Fraction by Wt: 58.5%
Name:ADDITIVES
Fraction by Wt: 1.5%
===================== Hazards Identification =====================
Effects of Overexposure:ANESTHETIC, HEADACHE, NAUSEA, DIZZINESS,
IRRITATION TO SKIN AND EYES.
======================= First Aid Measures =======================
First Aid:IN CASE OF CONTACT, FLUSH EYES OR SKIN WITH PLENTY OF WATER.
FRESH AIR.
===================== Fire Fighting Measures =====================
Flash Point:41F, T.C.C.
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:AVOID OPEN FLAMES OR SPARK SOURCES. PROVIDE
ADEQUATE VENTILATION.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID OPEN FLAMES, AVOID SPLASH
FILLING, STORE IN SEALED CONTAINERS. KEEP CONTAINERS CLOSED. AID
SKIN AND EYE CONTACT.
Other Precautions:WASH IMMEDIATELY WITH WATER AFTER CONTACT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:ORGANIC MASK
Ventilation:LOCAL EXHAUST/ OR MECHANICAL--APPROVED CLASS D MOTORS
Protective Gloves:NEOPRENE
Eye Protection:YES
Supplemental Safety and Health
2213 N. TYLER AVE., SO. EL MONTE, CA 51686
================== Physical/Chemical Properties ==================
HCC:F3
Spec Gravity:1.20
Solubility in Water:INSOLUBLE
Appearance and Odor:GREY WITH BENZOL LIKE ODOR.
Percent Volatiles by Volume:58.5
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
==================== Disposal Considerations ====================
Waste Disposal Methods:EVAPORATE OR FLUSH WITH WATER TO OPEN,
WELL-VENTILATED AREA. USE OIL SEWER IF AVAILABLE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD ***
ALL PAGES On Chemical Property IN THIS GROUP
NAME CAS
8030-00-081-2329 GR E,COLOR CODE PURPLE
TB 1363D(CV)
TB 1361D(C)
GRADE B,YELLOW
STA-LOK 800
79-41-4
TB 1363A(AV)
TB 1363A(AV)
TB 1361(A),RED,GRADE A
GRADE A,RED
GRADE AA,GREEN
TB 1361B(AA)
COBALT NITRATE
10141-05-6
CATALYST 11
106-50-3 872-50-4
CATALYST 9
112-57-2 112-24-3 4067-16-7
RTV-60, SILICONE RUBBER
78-10-4
P150F
1336-36-3
P6X9V3
1041249
7440-48-4
MA-356E
7440-48-4
16962-5
1310-58-3
E90 R P3 EPOXY PRIMER-PART A
1330-20-7 110-80-5 7439-92-1 18540-29-9 67-56-1
V93 V P1 EPOXY PRIMER-PART B
110-80-5 108-10-1 1330-20-7
PRIMER COATING, EPOXY 724600
1330-20-7 1317-36-8 14808-60-7 1333-82-0 14807-96-6 112945-52-5 71-36-3 123-86-4
PRIMER COATING, EPOXY 724116
107-98-2 1330-20-7 71-36-3
CHARTERSOL 210-66
VIBRA-CLEAN
WATERLESS HAND CLEANER PASTE
7732-18-5
TRAFFIC BEADS, GLASS BEADS
728-002
67-63-0
METAL PRETREATMENT,RESIN-ACID,MIL-C-8514C
13530-65-9 71-36-3 64-17-5 7664-38-2
PRIMER,PRETREATMENT COATING*
13530-65-9 64-17-5 7664-38-2
MIL-C-22750C EPOXY POLYAMIDE
MIL C-22750C EPOXY POLYAMIDE
1-1X-88 26081 GRAY MIL-C-22750C
1-1X-45 #16081 GRAY
1-1X-48 16473 GRAY MIL-C-22750C
1-1X-32 #16081 GRAY
PT-426/PT-428
71-36-3
EPOXY COATING, WHITE 17925 COMP I M1-036
78-93-3 107-98-2 123-86-4 1330-20-7 108-88-3
POLYAMID, COMP II UO-082
67-63-0 78-93-3
MIL-C-22750 EPOXY WHITE PART A
108-88-3 110-43-0
COATING, EPOXY, WHITE
108-88-3
EPOXY COATING, WHITE 17925 COMP I M1-036
108-88-3 108-65-6 78-93-3
POLYAMID, COMP II UO-082
78-93-3 67-63-0
MIL-C-22750 EPOXY(WHITE PART A
108-88-3
724-102 724-112
108-88-3 71-36-3 67-63-0 78-93-3 110-80-5
PRIMER COATING
7789-06-2 25068-38-6 108-88-3
02Y024,BASE,PART A,EPOXY.
78-93-3 123-86-4 7789-06-2 7758-97-6 108-88-3
02Y024,CATALYST,POLYAMIDE,PART B
123-86-4 71-36-3 67-63-0 108-88-3 78-93-3
EPOXY PRIMER CAT.MIL-P-23377D
1330-20-7