===================== Product Identification =====================
MSDS NAME:PT-426/PT-428
NIIN:00-082-2439
MSDS Number: BCXYG
=== Responsible Party ===
Company:PRODUCTS/TECHNIQUES, INC.
Emergency Phone Num:213-770-3600
CAGE:06341
=== Contractor Identification ===
Company:PRODUCTS/TECHNIQUES INC
Address:3271 S RIVERSIDE AVE
Box:City:RIALTO
State:CA
ZIP:92376
Country:US
Phone:909-877-3951
CAGE:06341
============= Composition/Information on Ingredients =============
Name:POLYAMIDE RESIN
Name:EPOXY RESIN
Name:GLYCOL ETHER
ACGIH TLV:200 PPM
Name:N-BUTYL ALCOHOL (SARA III)
CAS:71-36-3
RTECS #:EO1400000
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
Effects of Overexposure:EYE,THROAT,SKIN,LUNG IRRITANT
======================= First Aid Measures =======================
First Aid:WASH SKIN THROUGHLY FLUSH EYES WITH WATER,REMOVE TO FRESH
AIR,REMOVE CONTAMINATED CLOTHING GIVE ARTIFICIAL RESPIRATION IF
NEEDED,CALL DOCTOR
===================== Fire Fighting Measures =====================
Flash Point:106F,41C TOC
Lower Limits:1.0
Extinguishing Media:FOAM, CARBON DIOXIDE
Unusual Fire/Explosion Hazard:AVOID FIRE,HEAT,SPARKS,IGNITION
SOURCES,STORAGE IN DIRECT SUNLIGHT
================== Accidental Release Measures ==================
Spill Release Procedures:VENTILATE AREA MECHANICALLY,KEEP FROM
FLAME,FIRE,SPARKS,IGNITION SOURCES;DO NOT BREATHE VAPORS; CLEAN UP
WITH ABSORBENT MATERIAL/SWEEPING COMPOUND
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP FROM HEAT,SPARKS,FIRE,SOURCES OF
IGNITION;STORAGE IN DIRECT SUNLIGHT;AVOID PROLONGED SKIN
CONTACT;STORE CONTAINERS CLOSED AND UPRIGHT
Other Precautions:AVOID EYE AND SKIN CONTACT
============= Exposure Controls/Personal Protection =============
Respiratory Protection:SELF-CONTAINED BREATHING-APPARATUS,ORGANIC MASK
Ventilation:LOCAL,MECHANICAL,CLASS D
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY WITH SIDE SHIELDS
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:240F,116C
Spec Gravity:1.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SLIGHT BUTYL ALCOHOL ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
==================== Disposal Considerations ====================
Waste Disposal Methods:EVAPORATE OR FLUSH WITH WATER TO OPEN, WELL
VENTILATED AREA;USE OIL SEWER IF AVAILABLE REMOVE TO INCINERATOR
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
8030-00-081-2329 GR E,COLOR CODE PURPLE
| |
|
TB 1363D(CV)
| |
|
TB 1361D(C)
| |
|
GRADE B,YELLOW
| |
|
STA-LOK 800
| 79-41-4 |
|
TB 1363A(AV)
| |
|
TB 1363A(AV)
| |
|
TB 1361(A),RED,GRADE A
| |
|
GRADE A,RED
| |
|
GRADE AA,GREEN
| |
|
TB 1361B(AA)
| |
|
COBALT NITRATE
| 10141-05-6 |
|
CATALYST 11
| 106-50-3
872-50-4 |
|
CATALYST 9
| 112-57-2
112-24-3
4067-16-7 |
|
RTV-60, SILICONE RUBBER
| 78-10-4 |
|
P150F
| 1336-36-3 |
|
P6X9V3
| |
|
1041249
| 7440-48-4 |
|
MA-356E
| 7440-48-4 |
|
16962-5
| 1310-58-3 |
|
E90 R P3 EPOXY PRIMER-PART A
| 1330-20-7
110-80-5
7439-92-1
18540-29-9
67-56-1 |
|
V93 V P1 EPOXY PRIMER-PART B
| 110-80-5
108-10-1
1330-20-7 |
|
PRIMER COATING, EPOXY 724600
| 1330-20-7
1317-36-8
14808-60-7
1333-82-0
14807-96-6
112945-52-5
71-36-3
123-86-4 |
|
PRIMER COATING, EPOXY 724116
| 107-98-2
1330-20-7
71-36-3 |
|
CHARTERSOL 210-66
| |
|
VIBRA-CLEAN
| |
|
WATERLESS HAND CLEANER PASTE
| 7732-18-5 |
|
TRAFFIC BEADS, GLASS BEADS
| |
|
728-002
| 67-63-0 |
|
METAL PRETREATMENT,RESIN-ACID,MIL-C-8514C
| 13530-65-9
71-36-3
64-17-5
7664-38-2 |
|
PRIMER,PRETREATMENT COATING*
| 13530-65-9
64-17-5
7664-38-2 |
|
MIL-C-22750C EPOXY POLYAMIDE
| |
|
MIL C-22750C EPOXY POLYAMIDE
| |
|
1-1X-88 26081 GRAY MIL-C-22750C
| |
|
1-1X-45 #16081 GRAY
| |
|
1-1X-48 16473 GRAY MIL-C-22750C
| |
|
1-1X-32 #16081 GRAY
| |
|
PT-426/PT-428
| 71-36-3 |
|
EPOXY COATING, WHITE 17925 COMP I M1-036
| 78-93-3
107-98-2
123-86-4
1330-20-7
108-88-3 |
|
POLYAMID, COMP II UO-082
| 67-63-0
78-93-3 |
|
MIL-C-22750 EPOXY WHITE PART A
| 108-88-3
110-43-0 |
|
COATING, EPOXY, WHITE
| 108-88-3 |
|
EPOXY COATING, WHITE 17925 COMP I M1-036
| 108-88-3
108-65-6
78-93-3 |
|
POLYAMID, COMP II UO-082
| 78-93-3
67-63-0 |
|
MIL-C-22750 EPOXY(WHITE PART A
| 108-88-3 |
|
724-102 724-112
| 108-88-3
71-36-3
67-63-0
78-93-3
110-80-5 |
|
PRIMER COATING
| 7789-06-2
25068-38-6
108-88-3 |
|
02Y024,BASE,PART A,EPOXY.
| 78-93-3
123-86-4
7789-06-2
7758-97-6
108-88-3 |
|
02Y024,CATALYST,POLYAMIDE,PART B
| 123-86-4
71-36-3
67-63-0
108-88-3
78-93-3 |
|
EPOXY PRIMER CAT.MIL-P-23377D
| 1330-20-7 |
|
|