===================== Product Identification =====================
MSDS NAME:MURIATIC ACID, 20 DEG BAUME
NIIN:00-222-9641
MSDS Number: BWCVY
=== Responsible Party ===
Company:MCCALL OIL & CHEMICAL CORP/FORMERLY GREAT WESTERN
Address:808 SW 15TH AVE
City:PORTLAND
State:OR
ZIP:97205-1907
Country:US
Info Phone Num:503-228-2600
Emergency Phone Num:503-228-2600/800-424-9300(CHEMTREC)
Preparer's Name:MIKE HOEFLER
CAGE:2P121
=== Contractor Identification ===
Company:MCCALL OIL & CHEMICAL CORP/FORMERLY GREAT WESTERN
Address:808 SW 15TH AVE
Box:City:PORTLAND
State:OR
ZIP:97205-1907
Country:US
Phone:503-228-2600/800-424-9300(CHEMTREC)
CAGE:2P121
============= Composition/Information on Ingredients =============
Name:HYDROGEN CHLORIDE (HYDROCHLORIC ACID) (SARA III)
CAS:7647-01-0
RTECS #:MW4025000
Fraction by Wt: 31.4%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:C 5 PPM
ACGIH TLV:C 5 PPM; 9394
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: VAPOR/MIST CAN CAUSE IRRITATION
OF THE NOSE, THROAT, & UPPER RESPIRATORY TRACT. HCL CAN CAUSE EYE
IRRITATION, SEVERE BURNS & PERMANENT BLINDNESS. MAY CAUSE SEVERE
SKIN BURNS ON CONTACT. IF INGE STED, HCL CAUSES SEVERE BURNS OF THE
MOUTH, ESOPHAGUS, AND STOMACH. CHRONIC: EROSION OF TEETH,
BRONCHITIS & DERMATITIS.
Explanation of Carcinogenicity:HYDROCHLORIC ACID IS NOT LISTED BY IARC,
NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:INHALATION: IRRITATION OR RESPIRATORY TRACT,
COUGHING & CHOKING; BLEEDING OF NOSE & GUMS; PULMONARY EDEMA; AND
CORROSION OF TISSUES IN NOSE & THROAT. EYES: BURNS, PAIN, BLURRED
VISION OR BLINDNESS. SK IN: REDNESS AND BURNS. INGESTION:
PAIN,NAUSEA, VOMITING, THIRST, DIARRHEA, CIRCULATORY COLLAPSE AND
POSSIBLY DEATH.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF AILMENTS
OR WITH A PRE-EXISTING DISEASE INVOLVING THE EYES, SKIN, OR
RESPIRATORY SYSTEM MAY BE AT INCREASED RISK FROM EXPOSURE.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE
ARTIFICIAL RESPIRATION. GET MEDICAL ATTENTION. EYES: IMMEDIATELY
FLUSH WITH WATER FOR 15 MINUTES, LIFTING EYELIDS. GET MEDICAL
ATTENTION. SKIN: IMMEDIATELY RINSE WITH WATER. REMOVE CONTAMINATED
CLOTHING. GET MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING.
IF VICTIM IS CONSCIOUS, RINSE MOUTH WITH WATER. GET IMMEDIATE
MEDICAL ATTENTION.
===================== Fire Fighting Measures =====================
Flash Point:NON-COMUSTIBLE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE CLOTHING
SUITABLE FOR ACIDS AND A FULL FACED SELF CONTAINED BREATHING
APPARATUS. USE WATER TO COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:FLAMMABLE HYDROGEN GAS IS GENERATED BY
REACTION WITH MANY METALS. WATER SOLUTIONS ARE CORROSIVE.
================== Accidental Release Measures ==================
Spill Release Procedures:STOP OR REDUCE DISCHARGE IF IT CAN BE DONE
WITHOUT RISK. HYDROCHLORIC ACID SHOULD BE RECOVERED IF POSSIBLE.
NEUTRALIZE. CONTAIN SPILL USING ABSORBENT MATERIALS. PREVENT ENTRY
INTO BODIES OF WATER OR SEWER SYSTEMS. WEAR PROTECTIVE EQUIPMENT.
Neutralizing Agent:SLOWLY ADD LIME OR SODIUM CARBONATE.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE CLOSED CONTAINERS IN A CLEAN,
COOL, WELL VENTILATED AREA WITH ACID RESISTANT FLOOR. KEEP OUT OF
SUN. PROTECT CONTAINERS FROM PHYSICAL DAMAGE.
Other Precautions:KEEP AWAY FROM OXIDIZING AGENTS AND ALKALINE
MATERIALS. DO NOT STORE NEAR OR MIX WITH CYANIDES, SULFIDES OR
FORMALDEHYDE. WHEN DILUTING OR PREPARING SOLUTIONS, SLOWLY ADD ACID
TO WATER TO AVOID BOILIN G OR SPLATTERING.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:TO 50 PPM: SUPPLIED AIR RESPIRATOR(SAR);
SELF-CONTAINED BREATHING APPARATUS(SCBA); CHEMICAL CARTRIDGE
RESPIRATOR OR POWERED AIR-PURIFYING RESPIRATOR WITH CARTRIDGE(S) TO
PROTECT AGAINST HYDROGEN CHLOR IDE. TO 100 PPM: FULL-FACE SAR OR
SCBA.
Ventilation:LOCAL VENTILATION IS NORMALLY REQUIRED WHEN HANDLING THIS
CHEMICAL. ENCLOSED SYSTEMS ARE PREFERRED.
Protective Gloves:NATURAL RUBBER, NEOPRENE, BUNA-N, PVC
Eye Protection:CHEMICAL SPLASH GOGGLES WITH FACE SHIELD
Other Protective Equipment:EYE WASH FOUNTAINS AND SAFETY SHOWERS IN USE
AREA. IMPERVIOUS BOOTS, APRON, OR COVERALLS AS REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. DO NOT WEAR CONTAMINATED CLOTHING OR
FOOTWEAR.
Supplemental Safety and Health
THIS MATERIAL IS VERY TOXIC AND CORROSIVE. THE PH OF A 1% SOLUTION
(W/V) IS 1.3. WHEN EMPTY, THOROUGHLY RINSE CONTAINER WITH WATER
BEFORE DISPOSAL, RETURN TO MANUFACTURER, OR ANY OTHER INDUSTRIAL US
E.
================== Physical/Chemical Properties ==================
HCC:C1
Boiling Pt:B.P. Text:176F,80C
Melt/Freeze Pt:M.P/F.P Text:<32F,<0C
Spec Gravity:1.16
pH:1.3
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS TO LIGHT YELLOW FUMING LIQUID. PUNGENT
AND SUFFOCATING ODOR.
Corrosion Rate:RAPID
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ALKALI, CHLORINE RELEASERS, ALUMINUM, MAGNESIUM, ZINC AND AMINES.
Stability Condition to Avoid:HEAT SOURCES, CONTACT WITH METALS OR
ALKALIS.
Hazardous Decomposition Products:WHEN HEATED TO DECOMPOSITION, EMITS
TOXIC HYDROGEN CHLORIDE FUMES. WILL REACT WITH WATER TO PRODUCE
HEAT & TOXIC FUMES.
==================== Disposal Considerations ====================
Waste Disposal Methods:NEVER DISCHARGE HYDROCHLORIC ACID DIRECTLY INTO
SEWER OR SURFACE WATER. NEUTRALIZE WASTE WITH SODA ASH, LIME OR
LIMESTONE. RESULTANT SLUDGE CAN BE DISPOSED OF TO A SECURED
LANDFILL IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SOLTROL 100, AP1000
| 68551-16-6 |
|
9994 FLOOR SEALER
| |
|
RUSTLICK EDM-30, 72052
| 64742-47-8 |
|
81160, 26BR, FORM-A-GASKET (R) SEALANT, HIGH (SUPDAT)
| 63148-62-9
112945-52-5
4253-34-3
1309-37-1 |
|
O M FINISHING STAINS, 401
| 64741-41-9
1330-20-7
64742-95-6 |
|
ASTEC 100
| 66402-68-4
13701-59-2
84-74-2
12001-26-2 |
|
ASTEC B-16-71
| 13701-59-2
111-76-2
7779-90-0 |
|
ALPENCO LENS CLEANER & ANTI-FOGGING LIQUID
| 67-63-0
9004-87-9
1340-02-9
7732-18-5 |
|
FE-7004-A RESIWELD
| 2426-08-6
112945-52-5 |
|
FE-7004-B RESIWELD
| |
|
GARD ANTIRUST SAE 10, 30 & 15W-40 I/A/W MIL-L-21260D
| 64742-54-7 |
|
GARD ANTIRUST SAE 10, 30 & 15W-40 I/A/W MIL-L-21260D
| 64742-54-7 |
|
CAPRINUS(R) U OIL 40
| 64742-52-5
64742-18-3
64742-54-7
63449-39-8 |
|
GARDFLEET SAE 10, 30 AND 40 I/A/W MIL-L-2104F
| 64742-54-7 |
|
MIL-L-46152D GRADE 10W-30
| 7440-66-6 |
|
GARDFLEET SAE 10, 30 AND 40 I/A/W MIL-L-2104F
| 64742-54-7 |
|
I-C-OE 30, MIL-L-2104F OE 30, QUAL # MC-3705
| 64741-88-4 |
|
GARDFLEET SAE 10, 30 AND 40 I/A/W MIL-L-2104F
| 64742-54-7 |
|
I-C-OE 30, MIL-L-2104F OE 30, QUAL # MC-3705
| 64741-88-4 |
|
GARDFLEET SAE 10, 30 AND 40 I/A/W MIL-L-2104F
| 64742-54-7 |
|
1% 2% ETC HYDROGEN IN AIR
| 1333-74-0
7727-37-9
7782-44-7 |
|
T555-2
| |
|
RAW LINSEED OIL
| 8001-26-1 |
|
MURIATIC ACID, 20 DEG BAUME
| 7647-01-0 |
|
ANDEROL 401D SYNTHETIC INSTRUMENT OIL
| |
|
30008 PQ RP 160/MIL-L-6085B QA
| |
|
GUNCARE
| 64742-47-8
71-55-6 |
|
DOT 3 NOTOR VEHICLE BRAKE FLUID
| |
|
SODIUM CHROMATE
| 7775-11-3 |
|
KEROSINE
| |
|
CARBON DIOXIDE, GAS
| 124-38-9 |
|
PHENYLEPRINE HCL 1% NASAL SOLUTION
| |
|
AIRCO 60 ALUMINUM
| 7647-14-5
7789-24-4
7447-41-8
10361-37-2
7646-85-7 |
|
XYLENE (MIXED ISOMERS)
| 1330-20-7
68920-06-9 |
|
CU-P BRAZING ALLOY SILVALLOY O
| 7440-50-8
7723-14-0 |
|
CU-P BRAZING ALLOY SILVALLOY O
| 7440-50-8
7723-14-0 |
|
MMM-A-260C, TY.II,GR.B,CL1
| 110-54-3
9003-55-8
9006-04-6 |
|
DRY CLEANING SOLVENT
| 8030-30-6
75-09-2
127-18-4 |
|
SEMI GLOSS ENAMEL
| 8032-32-4 |
|
MIL-C-450C TYPE II
| |
|
F-102 BASMILE15145B
| 1314-13-2
8052-41-3 |
|
WHITE #17875
| |
|
NO DUST SWEEPING COMPOUND
| |
|
CARBON DIOXIDE (GAS) / DRY ICE (SOLID)
| 124-38-9 |
|
RED DECK ENAMEL ALKYD
| 14807-96-6
1314-13-2
14808-60-7
1309-37-1
51274-00-1
13463-67-7
64742-47-8
64741-92-0
64742-47-8 |
|
RED DECK ENAMEL ALKYD
| 14807-96-6
1314-13-2
14808-60-7
1309-37-1
51274-00-1
13463-67-7
64742-47-8
64741-92-0
64742-47-8 |
|
SEMI GLOSS ENAMEL
| 8032-32-4 |
|
SEMI GLOSS ENAMEL
| 8032-32-4 |
|
P407, P707, A357, A557
| 9000-70-8
7785-23-1
10108-64-2 |
|
P407, P707, A357, A557
| 9000-70-8
7785-23-1
10108-64-2 |
|
|