=====================  Product Identification  =====================

MSDS NAME:CHEMICAL RESISTANT GLOSS COATING, M61
NIIN:00N066504
MSDS Number: CBDQP
=== Responsible Party ===
Company:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Info Phone Num:201-573-9600
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:09585
=== Contractor Identification ===
Company:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:09585
Company:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
Box:City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:91950

=============  Composition/Information on Ingredients  =============

Name:XYLENE  (SARA 313) (CERCLA). VP:21 @ 38C.
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 24.3%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM;150 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:ACETIC ACID, BUTYL ESTER; (N-BUTYL ACETATE) (CERCLA). VP:9
    @ 20C.
CAS:123-86-4
RTECS #:AF7350000
Fraction by Wt: 10.2%
OSHA PEL:150 PPM
ACGIH TLV:150 PPM;200 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:2-HEPTANONE; (METHYL N-AMYL KETONE). VP:2.14 @ 68F.
CAS:110-43-0
RTECS #:MJ5075000
Fraction by Wt: 6.6%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM

Name:BENZENE, ETHYL-; (ETHYLBENZENE) (SARA 313). VP:10 @ 20C.
CAS:100-41-4
RTECS #:DA0700000
Fraction by Wt: 5%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM;125 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:STODDARD SOLVENT. VP:2 @ 20C.
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 15.8%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Name:SODIUM HYDROXIDE (CERCLA)
CAS:1310-73-2
RTECS #:WB4900000
Fraction by Wt: 1.8%
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3, C
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 19.9%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Name:BENZENE, 1,2,4-TRIMETHYL-; (1,2,4-TRIMETHYLBENZENE)  (SARA
    313)
CAS:95-63-6
RTECS #:DC3325000
Fraction by Wt: 3.8%
OSHA PEL:25 PPM
ACGIH TLV:25 PPM

Name:2-PENTANONE; (METHYL N-PROPYL KETONE). VP:27.8 @ 68F.
CAS:107-87-9
RTECS #:SA7875000
Fraction by Wt: 18.2%
OSHA PEL:200 PPM
ACGIH TLV:200 PPM;250 STEL

Name:2-PENTANONE, 4-METHYL-; (METHYL ISOBUTYL KETONE)  (SARA
    313) (CERCLA). VP:15 @ 20C.
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: 1.1%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM;75 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:BENTONITE; (BENTONITE CLAY) (MFR CAS #121888-66-2)
CAS:1302-78-9
RTECS #:CT9450000
Fraction by Wt: 1.7%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:HARMFUL IF INHALED. MAY
    AFFECT BRAIN/NERV SYS, CAUSING DIZZ, HDCH/NAUS. EYE/ SKIN:CONT
    CAUSES IRRIT. SKIN ABSORPTION:HAZ INGS CNTND IN THIS PROD HAVE
    CAPACITY TO BE ABSORBED THRU SKIN IN S UFFICIENT QTYS TO CAUSE
    SYSTEMIC TOX. SEE SAFE HNDLG & USE INFO. INGEST: IRRIT OF DIGEST
    TRACT & NERV (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:SYS DEPRESS (DROW, DIZZ, LOSS OF COORD
    & FATG). ASPIR HAZ - THIS MATL CAN ENTER LUNGS DURING
    SWALLOWING/VOMIT & CAUSE LUNG INFLAMM & DMG. CHRONIC:SKIN
    CONT:PRLNG/RPTD EXPOS MAY CAUSE DERM. NO TICE:RPTS HAVE ASSOC PERM
    BRAIN & NERV SYS DMG W/RPTD, PRLNG OVEREXP TO SOLVS AMONG PERSONS
    ENGAGED IN PAINTING (SUPDAT)
Medical Cond Aggravated by Exposure:NONE EXPECTED WHEN USED I/A/W SAFE
    HANDLING & USE INFORMATION.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE FROM HAZARD AREA, MAINTAIN BREATHING, CALL MD.
    SKIN:REMOVE W/SOAP & WATER. EYE:FLUSH IMMEDIATELY W/LARGE AMOUNTS
    OF WATER FOR AT LEAST 15 MINUTES. CALL MD. INGEST:DRINK 1 OR 2
    GLASSES OF	WATER TO DILUTE. DO NOT INDUCE VOMITING. CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>46F,>8C
Lower Limits:0.6%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . DO NOT USE WATER STREAM ON BURNING LIQUID. COOL EXPOSED
    CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST IF EXPOSED TO
    EXTREME HEAT OR FIRE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
    BREATHING VAPORS. USE NON-SPARKING TOOLS TO RETURN MATERIALS TO
    CONTAINER. ABSORB RESIDUE W/FULLER'S EARTH.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:FLAMMABLE - KEEP AWAY FROM HEAT,
    SPARKS & FLAME.
Other Precautions:USE ONLY W/ADEQUATE VENTILATION. AVOID PROLONGED
    CONTACT W/SKIN & BREATHING OF VAPOR, SPRAY MIST OR SANDING DUST.
    CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF REACH OF CHILDREN. DO
    NOT TAKE INTERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR A PROPERLY FITTED NIOSH/MSHA APPRVD
    VAP/PARTICULATE RESP FOR USE W/PAINTS (TC-23C) DURING
    APPLICATION/SANDING & UNTIL ALL VAPS & SPRAY MIST ARE EXHAUSTED. IN
    CONFINED SPACES/IN SITUATIONS WHERE C ONTINUOUS SPRAY OPERATIONS
    ARE (SUPDAT)
Ventilation:ADEQ TO MAINTAIN WORKING ATM BELOW TLV & LEL. MECH EXHST
    MAY BE REQD IN CONFINED AREAS. DISCHARGE EXHST ONLY IN (SUPDAT)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA . CLOTHING ADEQUATE TO PROTECT SKIN.
Work Hygienic Practices:REMOVE & WASH CLOTHING BEFORE REUSE. WASH HANDS
    BEFORE EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health
% VOLAT:61-64.6. EFTS OF OVEREXP:TRADE. INTENTIONAL MISUSE BE DELIB
    CONCENTRATING & INHALING CONTENTS MAY BE HARMFUL/FATAL. RESP
    PROT:TYPICAL, OR IF PROPER RESP FIT IS NOT POSS, WEAR A NIOSH/MSHA
    APPR VD POS-PRESS, SUPPLIED AIR RESP (TC-19C). VENT:AREA AWAY FROM
    IGNITION SOURCES.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>259F,>126C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:0.98-1.16
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:ELEVATED TEMPERATURES & BUILD UP OF
    VAPORS.
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON DIOXIDE &
    CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONVENTIONAL PROCEDURES IN COMPLIANCE W/LOCAL,
    STATE & FEDERAL REGULATIONS. DO NOT INCINERATE SEALED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***