=====================  Product Identification  =====================

MSDS NAME:POLYURETHANE CURING AGENT
NIIN:00-459-1756
Kit Part:Y
MSDS Number: CBTNF
=== Responsible Party ===
Company:CAAP CO INC
Address:152 PEPES FARM RD
City:MILFORD
State:CT
ZIP:06460-3670
Country:US
Info Phone Num:203-877-0375
Emergency Phone Num:800-424-9300 CHEMTREC
Preparer's Name:CHRISTINE L. SLEDGE
CAGE:6P753
=== Contractor Identification ===
Company:CAAP CO INC
Address:152 PEPES FARM ROAD
Box:City:MILFORD
State:CT
ZIP:06460
Phone:(203) 877-0375
CAGE:6P753

=============  Composition/Information on Ingredients  =============

Name:METHYL ISOBUTYL KETONE (SARA 313)
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: 36.3%
Other REC Limits:NONE SPECIFIED
OSHA PEL:100 PPM/75 STEL
ACGIH TLV:50 PPM/75 STEL; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:ALIPHATIC AMINE (NAME WITHHELD AS TRADE SECRET
Fraction by Wt: 63.7%
Other REC Limits:1 PPM (WEEL, AIHA)

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CONTACT MAY DAMAGE EYES,
    IRRITATE SKIN, & CAUSE RESPIRATORY IRRITATION UPON INHALATION.
    CHRONIC: REPEAT/ PROLONG EXPOSURE MAY CAUSE DEFATTING OF THE SKIN,
    DERMATITIS, AND POSSIBLE SENSITIZATION . INHALATION OF VERY HIGH
    VAPOR CONCENTRATIONS >PEL MAY CAUSE NEURAL IMPAIRMENT, KIDNEY &
    LIVER DAMAGE.
Effects of Overexposure:VAPOR EXPOSURE: BURNING EYES, HEADACHE,
    DIZZINESS, THROAT IRRITATION, LOSS OF APPETITE, NAUSEA. CONTACT:
    MAY CAUSE IRRITATION OF SKIN, BURNING OF SKIN OR EYES.
Medical Cond Aggravated by Exposure:PREEXISTING ALLERGIES, EYE, SKIN
    AND RESPIRATORY DISORDERS.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH WATER, GET IMMEDIATE MEDICAL ATTENTION.
    SKIN: REMOVE CONTAMINATED CLOTHING. WASH SKIN PROMPTLY WITH SOAP
    AND WATER. IF SIGNS & SYMPTOMS OF EXPOSURE EXIST, GET IMMED MEDICAL
    ATTENTION.	INHAL: REMOVE TO FRESH AIR, GIVE ARTIFICIAL RESPIRATION
    IF NOT BREATHING. IF BREATHING DIFFICULT GIVE OXYGEN. GET IMMEDIATE
    MED AID. INGEST: DON'T INDUCE VOMITING. GET IMMEDIATE MEDICAL AID.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:74.0F,23.3C
Lower Limits:1.2
Upper Limits:8.0
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USE FULL PROTECTIVE GEAR, INCLUDING A SCBA AND
    CHEMICAL PROTECTIVE SUIT FOR AMINE/AMMONIA TYPE CORROSIVE VAPORS.
    KEEP PERSONNEL UPWIND OF THE FIRE.
Unusual Fire/Explosion Hazard:NONE, PRODUCT IS A FLAMMABLE LIQUID. THE
    PRODUCT BECOMES A CORROSIVE LIQUID UPON THE ADDITION OF WATER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:RMV IGNIT SRCS-DONT SMOKE IN AREA. WEAR
    PROTECT EQUIP W/SOLVENT RESIST GLOVES/APRON/BOOTS/SCBA IN PRESS
    DEMAND MODE/POSITIVE PRESS AIR-SUPPLIED RESP. DIKE & SOAK UP
    W/ABSORB. CLEANUP ABSORB/CONTAIN. S WEEP/WET MOP W/SOAP & WATER.
    VENT AREA.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF VAPOR/MIST, WEAR NIOSH RESP FOR EMISSION
    LEVELS AT POINT OF USE. RESP W/FULL FACEPIECE/PURIFY CARTRIDGE RESP
    FOR ORGANIC VAPOR/MIST, SCBA IN PRESS DEMAND MODE/POSITIVE PRESS
    AIR-SUPPLD RESP. SPRAY  APPLIC, SPRAY BOOTH
Ventilation:EXHST VENT TO KEEP CONC BELOW PEL. VENT AIR PAST OPRATR,
    VAPOR SRC, THEN EXHST. FOLLOW GUIDELINES-"INDUSTRIAL VENT".
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:SAFETY GOGGLES OR SAFETY GLASSES.
Other Protective Equipment:SOLVENT RESISTANT APRON AND BOOTS FOR
    SPILLS.
Work Hygienic Practices:EYEWASH/SAFETY SHOWER SHOULD BE NEARBY/READY TO
    USE. WASH WELL WITH SOAP AND WATER AFTER HANDLING THE PRODUCT.
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:241F,116C
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:15.0
Vapor Density:3.5
Spec Gravity:(H20=1): 0.831
pH:11.0
Evaporation Rate & Reference:(BUTYL ACETATE=1): 1.6
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR YELLOW LIQUID WITH PUNGENT ODOR
Percent Volatiles by Volume:36.3%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND STRONG ACIDS.
Stability Condition to Avoid:ALL IGNITION SOURCES, HOT SURFACES, AND
    TEMPERATURES ABOVE 100F (38C). DO NOT SMOKE IN IMMED AREA WHERE
    PRODUCT IS USED.
Hazardous Decomposition Products:NITROGEN, CARBON MONOXIDE, CARBON
    DIOXIDE, OXIDES OF NITROGEN AND AMMONIA MAY BE RELEASED DURING
    COMBUSTION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATION IN AN APPROPRIATELY DESIGNED AND
    LICENSED INCINERATOR IS PREFERRED; THIS IS A RCRA HAZARDOUS
    IGNITABLE WASTE. REGULATIONS MAY VARY FROM STATE TO STATE; DISPOSE
    OF ACCORDING TO STATE, LOCA L, AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***