=====================  Product Identification  =====================

MSDS NAME:HP#:51626A (PLAIN PAPER,HIGH CAPACITY BLACK)
NIIN:01-420-0223
MSDS Number: CBTKQ
=== Responsible Party ===
Company:HEWLETT-PACKARD CO,CORPORATE HQ
Address:3000 HANOVER ST
City:PALO ALTO
State:CA
ZIP:94304-1112
Country:US
Info Phone Num:503-757-2000
Emergency Phone Num:503-757-2000/POISON CONTROL CENTER
Preparer's Name:MICHAEL HOLCOMB
CAGE:28480
=== Contractor Identification ===
Company:HEWLETT-PACKARD CO,   CORPORATE HQ
Address:3000 MINUTEMAN RD
Box:City:ANDOVER
State:MA
ZIP:01810-1032
Country:US
Phone:404-648-8754/FAX: 800-947-3299
CAGE:28480
Company:SOUTHWEST COMPUTER SUPPLIES
Box:UNKNOW
CAGE:NO798

=============  Composition/Information on Ingredients  =============

Name:2-PYRROLIDONE
CAS:616-45-5
RTECS #:UY5715000
Fraction by Wt: <12%
Other REC Limits:NONE RECOMMENDED

Name:VARIOUS DYES (IDENTITY OF DYES HELD AS TRADE SECRET)
Fraction by Wt: <4%
Other REC Limits:NONE RECOMMENDED

Name:WATER (CAS# 7732-18-5) AND MINOR INGREDIENTS
Fraction by Wt: <95%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL-BLACK INK LD50L >2000MG/KG,ESTIMATE
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN IRRIT:NON-IRRIT.EYE
    IRRIT:NON-IRRIT.NUTAGENICITY:NON-MUTAGENIC.
Explanation of Carcinogenicity:PER MSDS:CARCINOGENICITY:NO COMPONENTS
    ARE LISTED CARCINOGENS IN NTP OR FOUND TO BE CARCINOGENIC BY
    IARC/OSHA.
Effects of Overexposure:DYES IN INK MAKE EXPOSURE EASY TO
    DETECT.EYE:CONTACT W/EYES MAY CAUSE IRRIT.SKIN:NONE OF INKS ARE
    TOXIC BY SKIN CONTACT.CONTACT W/SKIN MAY CAUSE IRRIT.ORAL:INGESTION
    OF INK MAY RESULT IN GASTRIC DISTU RBANCES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/LARGE AMTS OF WARM WATER FOR @LEAST
    15MINS.SKIN:WASH AFFECTED AREA W/SOAP/WATER.ORAL:DILUTE WITH
    WATER.GET MED ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point:>255F,>124C
Autoignition Temp:Autoignition Temp Text:>230C
Lower Limits:NP
Upper Limits:NP
Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE ABSORBENT TOWEL TO WIPE UP INK.RINSE AREA
    W/DAMP CLOTH TO REMOVE REMAINING TRACES OF INK.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN.AVOID
    CONTACT BETWEEN GOLD CARTIRGE FACE/EYES,SKIN/CLOTH.RAPID REMOVAL OF
    INK W/SOAP/WATER FRM SKIN PREVENTS IRRIT/STAIN
Other Precautions:ALL DATA PRESENTED REFER TO INK IN ABOVE
    PRODUCTS.PRINT CARTRIDGES ARE EXEMPTED AS ARTICELS FROM OSHA COMM
    STD.THIS MSDS IS MADE AVAI BY HEWLETT-PACKARD AS SERVICE TO ITS
    CUSTOMERS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NO SPECIAL CONTROL MEASURES ARE REQUIRED WHEN
    USING PRINT CARTRIDGES.
Ventilation:NO SPECIAL CONTROL MEASURES ARE REQUIRED WHEN USING PRINT
    CARTRIGES.
Protective Gloves:SEE RESPIRATORY PROT.
Eye Protection:SEE RESPIRATORY PROT.
Other Protective Equipment:NO SPECIAL CONTROL MEASURES ARE REQUIRED
    WHEN USING PRINT CARTRIDGES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:>32F,>0C
Decomp Temp:Decomp Text:NP
Vapor Pres:15
Vapor Density:3.0
Spec Gravity:1.1
pH:NP
Viscosity:NP
Evaporation Rate & Reference:NP
Solubility in Water:COMPLETELY MISCIBLE
Appearance and Odor:BLACK LIQUID, PRACTICALLY ODORLESS
Percent Volatiles by Volume:NP
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
    LOCAL, STATE AND FEDERAL LAWS.

 ======================================================================
 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***