=====================  Product Identification  =====================

MSDS NAME:AS-P108 CATALYST
NIIN:00-459-1756
Kit Part:Y
MSDS Number: CBTNK
=== Responsible Party ===
Company:CAAP CO INC
Address:152 PEPES FARM RD
City:MILFORD
State:CT
ZIP:06460-3670
Country:US
Info Phone Num:203-877-0375
Emergency Phone Num:800-424-9300 CHEMTREC
Preparer's Name:CHRISTINE L. SLEDGE
CAGE:6P753
=== Contractor Identification ===
Company:CAAP CO INC
Address:152 PEPES FARM ROAD
Box:City:MILFORD
State:CT
ZIP:06460
Phone:(203) 877-0375
CAGE:6P753

=============  Composition/Information on Ingredients  =============

Name:XYLENE (SARA 313)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 65.9%
Other REC Limits:NONE SPECIFIED
OSHA PEL:100 PPM/STEL 150 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:METHYLETHYLKETONE; (MEK) (SARA 313)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 59.2%
Other REC Limits:NONE SPECIFIED
OSHA PEL:200 PPM/STEL 300 PPM
ACGIH TLV:200 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:TRIETHYLENE DIAMINE
CAS:280-57-9
RTECS #:HM0354200
Fraction by Wt: 3.4%
Other REC Limits:NONE SPECIFIED

Name:DIPROPYLENE GLYCOL
CAS:110-98-5
RTECS #:UB8785000
Fraction by Wt: 6.8%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CONTACT MAY DAMAGE EYES,
    IRRITATE SKIN, AND CAUSE RESPIRATORY IRRITATION UPON INHALATION.
    CHRONIC: REPEATED OR PROLONGED EXPOSURE MAY CAUSE HEADACHES,
    NAUSEA, VOMITING, AND COMA. INHALATION OF  VERY HIGH CONCENTRATIONS
    OR PROLONGED EXPOSURE MAY CAU
Effects of Overexposure:VAPOR EXPOSURE: BURNING EYES, HEADACHE,
    DIZZINESS, THROAT IRRITATION, LOSS OF APPETITE, NAUSEA. CONTACT:
    MAY CAUSE IRRITATION OF SKIN, BURNING OF SKIN OR EYES.
Medical Cond Aggravated by Exposure:PREEXISTING ALLERGIES, EYE, SKIN
    AND RESPIRATORY DISORDERS.

=======================  First Aid Measures  =======================

Eyes:FLUSH W/WTR 15 MIN, LIFT LIDS-GET IMMED MED AID. SKIN:
    WASH W/SOAP & WTR. RMV CONTAM CLOTH-WASH BEFORE REUSE. IF
    IRRIT/EXPOS SYMP EXISTS-GET IMMED MED AID. INHAL: RMV TO FRESH
    AIR-GIVE ARTIF RESP  IF NO BREATH-GET IMMED MED AID. INGEST: GET
    IMMED MED

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:68.0F,20.0C
Lower Limits:1.0
Upper Limits:8.0
Extinguishing Media:USE WATER FOG, DRY CHEMICAL, FOAM, OR CO2. DO NOT
    USE A DIRECT WATER STREAM.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF CONTAINED
    BREATHING APPARATUS & FULL PROTECTIVE CLOTHING. USE WATER SPRAY TO
    COOL NEARBY CONTAINERS AND STRUCTURES EXPOSED TO FIRE
Unusual Fire/Explosion Hazard:PROD-FLAMM LIQ. AVOID ACCUMULTN-MAY FLOAT
    ON WTR-REIGNIT ON WTR SURFACE. EXTING ALL SRCS OF IGNIT-VAPOR
    HEAVIER THAN AIR-TRVL DISTANCE TO IGNIT SOURCE/FLASHBACK

==================  Accidental Release Measures  ==================

Spill Release Procedures:RMV IGNIT SRCS-DONT SMOKE IN AREA. WEAR
    PROTECT EQUIP W/SOLVENT RESIST GLOVES/APRON/BOOTS/SCBA IN PRESS
    DEMAND MODE/POSITIVE PRESS AIR-SUPPLIED RESP. DIKE & SOAK UP
    W/ABSORB. CLEANUP ABSORB/CONTAIN. S WEEP/WET MOP W/SOAP & WATER.
    VENT AREA.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF VAPOR/MIST, WEAR NIOSH RESP FOR EMISSION
    LEVELS AT POINT OF USE. RESP W/FULL FACEPIECE/PURIFY CARTRIDGE RESP
    FOR ORGANIC VAPOR/MIST, SCBA IN PRESS DEMAND MODE/POSITIVE PRESS
    AIR-SUPPLD RESP. SPRAY  APPLIC, SPRAY BOOTH
Ventilation:EXHST VENT TO KEEP CONC BELOW PEL. VENT AIR PAST OPRATR,
    VAPOR SRC, THEN EXHST. FOLLOW GUIDELINES-"INDUSTRIAL VENT".
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:SAFETY GOGGLES OR SAFETY GLASSES.
Other Protective Equipment:SOLVENT RESISTANT APRON.
Work Hygienic Practices:EYEWASH/SAFETY SHOWER SHOULD BE NEARBY/READY TO
    USE. WASH WELL WITH SOAP AND WATER AFTER HANDLING THE PRODUCT.
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

HCC:F7
Boiling Pt:B.P. Text:241-281F
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:8
Vapor Density:3.6
Spec Gravity:(H20=1): 0.869
pH:10
Evaporation Rate & Reference:(BUTYL ACETATE=1): 0.85
Solubility in Water:PARTIAL
Appearance and Odor:CLEAR COLORLESS LIQUID WITH AROMATIC ODOR
Percent Volatiles by Volume:100%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ALKALIS, AND HALOGENS.
Stability Condition to Avoid:ALL IGNITION SOURCES, HOT SURFACES, AND
    TEMPERATURES ABOVE 100F (38C). DO NOT SMOKE IN IMMED AREA WHERE
    PRODUCT IS USED.
Hazardous Decomposition Products:CARBON MONOXIDE/CARBON DIOXIDE/BLACK
    SMOKE CONTAINING UNIDENTIFIED ORGANIC COMPOUNDS MAY BE RELEASED
    DURING COMBUSTION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATION IN AN APPROPRIATELY DESIGNED AND
    LICENSED INCINERATOR IS PREFERRED; THIS IS A RCRA HAZARDOUS
    IGNITABLE WASTE. REGULATIONS MAY VARY FROM STATE TO STATE; DISPOSE
    OF ACCORDING TO STATE, LOCA L, AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***