=====================  Product Identification  =====================

MSDS NAME:PRO-SEAL PVA SEALER, PV 102
NIIN:00N072607
MSDS Number: CBYPP
=== Responsible Party ===
Company:EVR-GARD COATINGS CO
Address:16400 GARFIELD AVE
City:PARAMOUNT
State:CA
ZIP:90723
Country:US
Info Phone Num:213-531-0131
Emergency Phone Num:213-531-0131
CAGE:5G582
=== Contractor Identification ===
Company:EVR-GARD COATINGS CO
Address:16400 GARFIELD AVE
Box:City:PARAMOUNT
State:CA
ZIP:90723
Country:US
Phone:310-531-0131
CAGE:5G582

=============  Composition/Information on Ingredients  =============

Name:ETHYLENE GLYCOL (SARA 313) (CERCLA). VP:0.1 @ 68F.
CAS:107-21-1
RTECS #:KW2975000
OSHA PEL:100 PPM (MFR)
ACGIH TLV:50 PPM, VAPOR, C
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:VOLATILE ORGANIC COMPOUNDS (COATING): 130 G/L.
RTECS #:9999999VO

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:MAY CAUSE HEADACHE
    AND NAUSEA, DIZZINESS. SKIN & EYE CONTACT:PRIMARILY AN IRRITANT.
    REDNESS OR RASH ON SKIN. SKIN ABSORPTION:PRIMARILY AN IRRITANT.
    REDNESS OR RASH ON SKIN. INGESTION: NAUSEA, DIZZINESS, HEADACHES.
    CHRONIC:PROLONGED INHALATION MAY CAUSE HEADACHE AND NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PROLONGED CONTACT W/MATERIAL MAY
    CAUSE DERMATITIS.

=======================  First Aid Measures  =======================

First Aid:INHALATION:REMOVE PATIENT TO FRESH AIR. EYES:FLUSH W/PLENTY
    OF CLEAN WATER FOR AT LEAST 15 MINUTES. SKIN:REMOVE SATURATED,
    CONTAMINATED CLOTHING & WASH AFFECTED SKIN AREAS W/PLENTY OF SOAPY
    WATER THOR OUGHLY. INGESTION:INDUCE VOMITING W/1 OZ OF SYRUP OF
    IPECAC FOLLOWED IN 5 MINUTES W/GLASS OF WATER. CALL MD.

=====================  Fire Fighting Measures  =====================

Lower Limits:0.6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . THIS IS A WATER-BASED PRODUCT.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB SPILL W/ANY ABSORBENT MATERIAL -
    SAWDUST, SAND, CLAY, ETC & FLUSH SPILL AREA W/LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:THIS PRODUCT IS STABLE UNDER NORMAL
    USE & STORAGE CONDITIONS. KEEP OUT OF REACH OF CHILDREN. KEEP FROM
    FREEZING.
Other Precautions:DO NOT TAKE INTERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE OF NIOSH APPROVED MASKS DURING APPLICATION
    TO AVOID EXCESSIVE INHALATION OF VAPORS IS HIGHLY RECOMMENDED. OPEN
    WINDOWS & DOORS OR USE OTHER MEANS TO INSURE FRESH AIR ENTRY DURING
    APPLICATION & DRY ING.
Ventilation:PROVIDE ADEQ VENT AT ALL TIMES DURING HANDLING &
    APPLICATION OF THIS PROD. INSURE ADEQ SUPPLY OF FRESH AIR AT ALL
    TIMES.
Protective Gloves:BUNA N GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:OBSERVE STANDARD HYGIENE PRACTICES WHEN
    HANDLING THIS PRODUCT.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1.2 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:WHITE PAINT; SLIGHT AMMONIA SMELL.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & ALKALIS & MATERIALS THAT REACT W/WATER.
Stability Condition to Avoid:DO NOT STORE IN HIGH TEMPERATURES.
Hazardous Decomposition Products:NONE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PLACE ALL HAZARDOUS WASTES, INCLUDING ABSORBENTS
    USED FOR SPILLS, IN 53-GAL METAL DRUMS & DISPOSE IN APPROVED
    DUMPSITE I/A/W PRESCRIBED FEDERAL, STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***