=====================  Product Identification  =====================

MSDS NAME:K58 7764, KENDALL SHP SYNTHETIC MANUAL (SUPDAT)
NIIN:00N072664
MSDS Number: CBYRT
=== Responsible Party ===
Company:WITCO
Address:77 N KENDALL AVE
City:BRADFORD
State:PA
ZIP:16701
Country:US
Info Phone Num:814-368-6111
Emergency Phone Num:814-368-6111;800-424-9300(CHEMTREC)
Preparer's Name:ROBERT KELLAM
CAGE:6Z384
=== Contractor Identification ===
Company:WITCO
Address:29111 MILFORD RD
Box:125
City:NEW HUDSON
State:MI
ZIP:48165
Country:US
Phone:313-437-8161
CAGE:6Z384
Company:WITCO CORP, KENDALL REFINING DIV
Address:77 N KENDALL AVE
Box:City:BRADFORD
State:PA
ZIP:16701
Country:US
CAGE:0PKZ7

=============  Composition/Information on Ingredients  =============

Name:SYNTHETIC HYDROCARBONS
CAS:68515-33-3
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:ADDITIVES
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:2-NAPHTHYLAMINE (SARA 313) (CERCLA)  % WT: <1 PPM
CAS:91-59-8
RTECS #:QM2100000
Fraction by Wt: <0.1%
OSHA PEL:N/K 
ACGIH TLV:N/K 
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NO DATA AVAILABLE. CHRONIC:
    PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE DERMATITIS (SKIN
    IRRITATION).
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: IMMEDIATELY FLUSH WITH LARGE QUANTITIES OF WATER FOR AT
    LEAST 15 MINUTES & CALL MD. SKIN: REMOVE EXCESS WITH CLOTH OR
    PAPER. WASH THOROUGHLY WITH SOAP AND WATER. INHAL: REMOVE TO FRESH
    AIR. CALL  MD. INGEST: DO NOT INDUCE VOMIT. IF CONSCIOUS, HAVE
    VICTIM RINSE MOUTH, THEN DRINK LARGE AMOUNTS OF WATER. NEVER GIVE
    ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. CALL MD IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>455F,>235C
Extinguishing Media:DRY CHEMICAL OR WATER FOG OR CARBON DIOXIDE OR
    FOAM. CLOSED CONTAINERS EXPOSED TO FIRE MAY BE COOLED WITH WATER.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . DO NOT USE WATER EXCEPT AS FOG.
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:TRANSFER BULK OF MIXTURE INTO ANOTHER
    CONTAINER. ABSORB RESIDUE WITH AN INERT MATERIAL SUCH AS EARTH,
    SAND OR VERMICULITE. SWEEP UP AND DISPOSE AS SOLID WASTE IN
    ACCORDANCE WITH LOCAL, STATE AND FEDER AL REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT HANDLE OR STORE AT TEMPERATURES
    OVER 38C (100F).
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH CERTIFIED RESPIRATOR WITH DUAL ORGANIC
    VAPOR/MIST AND PARTICULATES CARTRIDGE IF VAPOR CONCENTRATION
    EXCEEDS PERMISSIBLE EXPOSURE LIMIT.
Ventilation:LOCAL IF NECESSARY TO MAINTAIN ALLOWABLE PEL OR TLV.
Protective Gloves:NEOPRENE TYPE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO: TRANSMISSION LUBRICANT.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:-40F,-40C
Vapor Pres:0 @ 20C
Vapor Density:NOT VOLAT
Spec Gravity:0.92 (H*2O=1)
Evaporation Rate & Reference:0
Solubility in Water:0% BY WT AT 20C
Appearance and Odor:DARK BROWN TO BLACK LIQUID; BLAND ODOR.
Percent Volatiles by Volume:0 WT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS SUCH AS HYDROGEN PEROXIDE, BROMINE AND CHROMIC ACID.
Stability Condition to Avoid:PRODUCT IS STABLE UNDER NORMAL CONDITIONS.
Hazardous Decomposition Products:CARBON MONOXIDE & CARBON DIOXIDE FROM
    BURNING. OXIDES OF NITROGEN, OXIDES OF SULFUR, OXIDES OF
    PHOSPHOROUS FROM BURNING.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
    FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***