=====================  Product Identification  =====================

MSDS NAME:521-03 DEEPTINT BASE, SILATHANE INT/EXT (SUPDAT)
NIIN:00N072632
MSDS Number: CBYQT
=== Responsible Party ===
Company:BRUNING PAINT CO
Address:601 S HAVEN ST
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Info Phone Num:410-342-3636;410-342-3641
Emergency Phone Num:410-342-3636;410-342-3641
CAGE:EO376
=== Contractor Identification ===
Company:BRUNING PAINT COMPANY
Address:601 S. HAVEN STREET
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-424-9300(NIGHT)410-342-3636 DAY
CAGE:EO376
Company:KYANIZE PAINT
Address:601 S HAVEN ST
Box:City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-368-2076
CAGE:85520

=============  Composition/Information on Ingredients  =============

Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 25-50%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM
    SILICATE)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 0-5%
OSHA PEL:20 MPPCF
ACGIH TLV:2 MG/M3 RDUST

Name:SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (HYDROCARBON
    SOLVENT)
CAS:64742-88-7
Fraction by Wt: 0-5%
Other REC Limits:1050 MG/M3 (MFR)
OSHA PEL:2625 MG/M3 (MFR)
ACGIH TLV:525 MG/M3 (MFR)

Name:PIGMENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:VOLATILE ORGANIC CONTENT RANGE:3.32 TO 3.74
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:SUPDAT:EXPLOSIVELY. CNTNRS EXPOSED TO INTENSE HEAT FROM
    FIRES SHOULD BE COOLED W/WATER TO PVNT VAPOR PRESSURE (ING 7)
RTECS #:9999999ZZ

Name:ING 6:BUILDUP WHICH COULD RESULT IN CONTAINER RUPTURE.
RTECS #:9999999ZZ

Name:FIRST AID PROC:INDUCE VOMITING UNLESS ADVISED BY A
    PHYSICIAN. CALL A PHYSICIAN IMMEDIATELY.
RTECS #:9999999ZZ

Name:SPILL RELEASE PROC:AUTHORITIES. NOTIFY HLTH & POLLUTION
    CONTROL AGENCIES. CALL SPILL RESPONSE TEAMS IF SPILL IS LARGE.
RTECS #:9999999ZZ

Name:RESP PROT:PARTICULATE & GAS & VAPOR. IN CONFINED AREAS, USE
    (NIOSH APPRVD) AIR LINE TYPE RESPIRATORS/HOODS. (ING 11)
RTECS #:9999999ZZ

Name:ING 10:RESP PROT MAY ALSO BE NEC IN ANY LATER MFG
    OPERATIONS IN WHICH THESE PRODS MAY BECOME AIRBORNE IN FORM (ING
    12)
RTECS #:9999999ZZ

Name:ING 11:OF VAPOR OR DUST.
RTECS #:9999999ZZ

Name:VENT:APPRVD RESP TO PVNT OVEREXPOSURE. PROVIDE GEN
    DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO KEEP TLV (ING 14)
RTECS #:9999999ZZ

Name:ING 13:OF THE MOST HAZ INGRED IN SECTION II BELOW
    ACCEPTABLE LIMIT, LEL IN SECTION IV BELOW STATED LIMIT AND (ING 15)
RTECS #:9999999ZZ

Name:ING 14:TO REMOVE DECOMPOSITION PRODUCTS DURING WELDING OR
    FLAME CUTTING ON SURFACES COATED WITH THESE PRODUCTS.
RTECS #:9999999ZZ

Name:PROT GLOVES:NEOPRENE BUNA N OR NITRILE.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:THESE PRODUCTS MAY CAUSE NOSE,
    THROAT AND EYE IRRITATION. SYMPTOMS OF OVEREXPOSURE INCLUDE
    DIZZINESS, HEADACHE, INTOXICATION WITH EUPHORIA LEADING TO
    UNCONSCIOUSNESS. CHRONIC:REPORTS HAVE ASSOCI ATED REPEATED &
    PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT
    BRAIN & NERVOUS SYSTEM (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:DMG. INTENTIONAL MISUSE BY DELIB
    CONCENTRATING & INHALING CONTENTS MAY BE HARMFUL/FATAL. DO NOT
    BREATHE VAPORS/SPRAY MIST. WEAR APPROP, PROPERLY FITTED RESP (NIOSH
    APPRVD) DURING & AFTER APPL IC UNLESS AIR MONITORING DEMONSTRATES
    VAP/MIST LEVS ARE BELOW APPLIC LIMS. FOLLOW RESP MFR'S DIRECTIONS
    FOR RESP USE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/LUKE WARM WATER FOR @ LEAST 15 MINS. SEEK PHYS
    IMMED. SKIN:FLUSH WASH W/COPIOUS AMTS OF LUKE WARM WATER. REMOVE
    CONTAMD CLTHG PROMPTLY. IF IRRIT OCCURS, GET MED ATTN. INHAL:REMOVE
    EXPOSED  INDIVIDUAL TO FRESH AIR. RESTORE BRTHG IF REQD. CONT PHYS
    IMMED. INGEST:RINSE MOUTH IMMED. GIVE EXPOSED INDIVIDUAL 6-8 OUNCES
    OF LIQ. (NEVER GIVE ANYTHING BY MOUTH TO UNCON PERSON.) DO NOT (ING
    8)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:104F,40C
Lower Limits:0.9%
Upper Limits:7.0%
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE . THE NFPA
    CLASS B EXTING IS DESIGNED TO EXTING NFPA CLASS IB FLAMM LIQ FIRES.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . WATER SPRAY MAY BE INEFTIVE. WATER MAY BE USED TO COOL
    CLSD CNTNRS TO PVNT PRESS BUILDUP (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
    HEAT, ELEC EQUIP, SPKS & OPEN FLAME. CLSD CNTNRS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT. DO NOT APPLY TO HOT (SUPDAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:STOP AND/OR CONTAIN DISCHARGE IF IT MAY BE
    DONE SAFELY. KEEP ALL SOURCES OF IGNIT AWAY. VENTILATE AREA OF
    SPILL. USE NON-SPARKING TOOLS FOR CLEANUP. COVER W/INERT MATL TO
    REDUCE FUMES. KEEP OUT OF DRA INS, SEWERS, OR WATERWAYS. CONTACT
    FIRE(ING 9)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. GROUND CNTNRS
    WHEN POURING & LIMIT FREE-FALL TO FEW INCHES TO PREVENT STATIC
    SPARKS. KEEP CNTNR TIGHTLY CLSD WHEN NOT IN USE.
Other Precautions:AVOID SPONT COMBUST OF CONTAMD RAGS/OTHER EASILY
    IGNITABLE ORGANIC MATLS BY IMMED IMMERSION IN WATER. EMPTIED CNTNRS
    MAY CNTN HAZ PROPERITES. DO NOT CUT/PUNCTURE CNTNR. DO NOT WELD
    NEAR CNTNR. USE ONL Y WITH ADEQUATE VENTILATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN OUTDOOR/OPEN AREAS, USE (NIOSH APPRVD) MECH
    FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF OVERESPRAY DURING
    SPRAY APPLIC. IN RESTRICTED VENT AREAS, USE (NIOSH APPRVD)
    CHEM-MECH FILTERS DESIGNED	TO REMOVE COMBINATION OF (ING 11)
Ventilation:USE VENT AS REQD TO CONTROL VAP CONCS. AVOID PRLNGD/RPTD
    BRTHS OF VAPS. IF EXPOSURE EXCEEDS TLV, USE NIOSH (ING 13)
Protective Gloves:RESISTANT SUCH AS NATL RUBB, (ING 16)
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:APRON SHOULD BE WORN TO AVOID SKIN CONTACT.
    ANSI APPRVD EMERGENCY EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:WASH HANDS THORO BEFORE EATING & USING
    WASHROOM. REMOVE CONTAMD CLTHG IMMED & DO NOT WEAR IT UNTIL
    PROPERLY LAUNDERED.
Supplemental Safety and Health
MFR TRADE NAME/PART NO:BRUTONE INTERIOR ALKYD SEMI-GLOSS ENAMEL. %
    VOLAT:50.96-57.73. FIRE FIGHT PROC:& POSS AUTOIGNIT/EXPLO WHEN
    EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG NOZZ ARE PREF. EXPLO
    HA Z:SURFACES. NEVER USE WELDING/CUTTING TORCH ON/NEAR CNTNR (EVEN
    EMPTY) BECAUSE PROD (EVEN RESIDUE) MAY IGNITE (ING 6)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:2 @ 68F
Vapor Density:HVR/AIR
Spec Gravity:1.04-1.32
Evaporation Rate & Reference:SLOWER/BUTYL ACETATE
Solubility in Water:NOT KNOWN
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID EXPOSURE TO SPARKS, OPEN FLAME, HOT SURFACES & ALL SOURCES OF
    HEAT & IGNITION.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ FUMES WHEN HEATED TO
    DECOMP AS IN WELDING. FUMES MAY CONTAIN CO, CO*2 & OXIDES OF
    NITROGEN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT FLUSH TO SEWER, WATERSHED OR WATERWAY.
    DISPOSE OF THESE PRODUCTS IN ACCORDANCE WITH APPLICABLE LOCAL,
    COUNTY, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***