===================== Product Identification =====================
MSDS NAME:SILICONE ELASTOMER
NIIN:00-225-4548
Kit Part:Y
MSDS Number: CCBYS
=== Responsible Party ===
Company:ACCUMETRIC INC.
Address:350 RING ROAD
Box:843
City:ELIZABETHTOWN
State:KY
ZIP:42701
Country:US
Info Phone Num:502-769-3385 FAX: 502-765-2412
Emergency Phone Num:800-424-9300 CHEMTREC
Preparer's Name:GARY HARTLAGE
CAGE:58149
=== Contractor Identification ===
Company:ACCUMETRIC INC
Address:350 RING RD
Box:843
City:ELIZABETHTOWN
State:KY
ZIP:42701
Country:US
Phone:502-769-3385
CAGE:58149
============= Composition/Information on Ingredients =============
Name:METHYLTRIACETOXYSILANE OR SILANE, METHYLTRIACETOXY-
CAS:4253-34-3
RTECS #:VV4500000
Fraction by Wt: 2%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:NOT ESTABLISHED.
ACGIH TLV:NOT ESTABLISHED.
Name:ETHYLTRIACETOXYSILANE
CAS:17689-77-9
Fraction by Wt: 2%
Other REC Limits:NONE RECOMMENDED
Name:SILICA, AMORPHOUS OR SILICA, FUMED.
CAS:7631-86-9
Fraction by Wt: 10%
Other REC Limits:8 PPM
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CONTACT MAY CAUSE SKIN & EYE
IRRITATION. INHALATION OF VAPOR MAY CAUSE IRRITATION MAY CAUSE
NASAL & RESPIRATORY IRRITATION. INGESTING LARGE AMOUNTS MAY CAUSE
DIGESTIVE DISCOMFORT. CHRONIC: REPE ATED/PROLONGED SKIN CONTACT MAY
CAUSE MODERATE IRRITATION.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:EYES-SLIGHT TO MODERATE IRRITATION WITH REDNESS
& SWELLING. SKIN-IRRITATION. INHALED-IRRITATION. INGESTED-DIGESTIVE
DISCOMFORT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYES-FLUSH WITH WATER FOR 15 MINUTES. GET MEDICAL ATTENTION.
SKIN-WIPE OFF AND FLUSH WITH WATER. INHALED-REMOVE TO FRESH AIR.
INGESTED-NO FIRST AID SHOULD BE NEEDED.
===================== Fire Fighting Measures =====================
Flash Point Method:CC
Flash Point:=100.C, 212.F
212F,100C
Extinguishing Media:WATER FOG, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL FIRE FIGHTER'S PROTECTIVE GEAR SHOULD BE WORN IN FIRES
INVOLVING CHEMICALS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE PRODUCT & CONTAIN FOR SALVAGE OR
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE BELOW 90F/32C. KEEP CONTAINER
CLOSED UNTIL READY FOR USE.
Other Precautions:PRODUCT FORMS ACETIC ACID (HOAH) WHEN EXPOSED TO
WATER OR HUMID AIR. PROVIDE VENTILATION DURING USE TO CONTROL HOAC
EXPOSURE WITHIN 10 PPM (TLV) OR USE RESPIRATORY PROTECTION.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR AN EMERGENCY OCCURS; WEAR AN MSHA/NIOSH APPROVED RESPIRATOR WITH
ORGANIC VAPOR CARTRIDGE OR AN AIR-SUPPLIED RESPIRATOR OR SCBA, AS
REQUIRED. USE IAW 29 CFR 1910.134.
Ventilation:LOCAL EXHAUST IS RECOMMENDED.
Protective Gloves:WASHING AT MEALTIMES SHOULD BE ADEQUATE.
Eye Protection:SAFETY GLASSES AS MINIMUM.
Other Protective Equipment:NONE SPECIFIED BY MFR.DLA-HMIS:APPROPRIATE
CLOTHING TO PREVENT PROLONGED SKIN CONTACT.EYE WASH STATION &
SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
KEY1=V5. PART A OF 2 PART KIT.
================== Physical/Chemical Properties ==================
HCC:F2
Vapor Pres:<5
Spec Gravity:1.04
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PASTE; ACETIC ACID-LIKE ODOR.
Percent Volatiles by Volume:<5
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:CARBON OXIDES & TRACES OF INCOMPLETELY
BURNED CARBON COMPOUNDS. SILICONE DIOXIDE. METAL OXIDES.
FORMALDEHYDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|