=====================  Product Identification  =====================

MSDS NAME:DRYDENE DIESELALL ENGINE OIL,SAE 10W-30 & 15W-40
NIIN:00-186-6705
MSDS Number: CCBYQ
=== Responsible Party ===
Company:DRYDEN OIL CO INC
Address:9300 PULASKI HWY
City:BALTIMORE
State:MD
ZIP:21220
Country:US
Info Phone Num:800-777-1466
Emergency Phone Num:410-574-5000
CAGE:40310
=== Contractor Identification ===
Company:DRYDEN OIL CO INC
Address:9300 PULASKI HWY
Box:City:BALTIMORE
State:MD
ZIP:21220
Country:US
Phone:301-574-5000
CAGE:40310

=============  Composition/Information on Ingredients  =============

Name:LUBRICATING OIL BASE STOCK
CAS:64742-54-7
RTECS #:PY8035500
Fraction by Wt: >65%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:5 MG/M3 (OIL MIST)
ACGIH TLV:5 MG/M3 (OIL MIST)

Name:PROPRIETARY ADDITIVES
Fraction by Wt: <35%
Other REC Limits:NONE RECOMMENDED

Name:ZINC COMPOUND
Fraction by Wt: 1.5%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN:PROL/REP COTNACT MAY CAUSE IRRIT.
    EYE:MAY CAUSE IRRIT. INGEST:RELATIVELY NON-TOXIC.
Effects of Overexposure:SKIN/EYE IRRIT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/WATER FOR 15MINS/TIL IRRIT SUBSIDES;PERSIST CALL
    DR.SKIN:REMOVE CONTAIN CLOTH.WASH SKIN THOROUGHLY
    W/SOA/WATER.INGEST:DO NOT NDUCE VOMIT.CALL PHYSICIAN
    IMMED.INHAL:VAP PRESSURE VERY LOW.UN DER AMB TEMP CONDITIONS NOT
    NORMALLY A PROBLEM.OVERCOME BY VAP FROM HOT PRODUCT IMMED REMOVE TO
    FRESH AIR.CALL PHYSICIAN.GIVE OXY IF AVAILABLE.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:372F,189C
Autoignition Temp:Autoignition Temp Text:ND
Lower Limits:ND
Upper Limits:ND
Extinguishing Media:FOAM,WATER SPRAY(FOG),DRY CHEM,CO2,VAPORIZING LIQ
    TYP EXT AGENTS-ALL BE SUITABLE FOR EXT FIRE INVOLVING MATL,SIZE
    DEPEND
Fire Fighting Procedures:PLANT FIRE PROT/RESP STRATEGY THRU
    CONSULTATION W/LOC FIRE PROT AUTHOR/APPROP SPEC.WATER/FOAM MAY
    CAUSE FROTHING.COOL FIRE-EXPO CNTNR W/WATER.WATERSPRAY (SUPPL)
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REPORT AS REQUIRED TO APPROP AUTHOR.IF REACH
    WATERWAY/INTERMITTENT DRY CREEKS NOTIFY COAST GUARD
    800-424-8802.RECOVER FREE PROD.ADD SAND/EARTH/SUITABLE ABSORB TO
    SPILL AREA.MIN BREATH VAP/SKIN CONTACT .DIKE/IMPOUND.ASSURE
    CONFORMITY W/ALL REGS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE W/CAUT AROUND HEAT/SPARK/PIL
    LIGHT/STATIC ELECT/OPN FLAME.KEEP CNTNR CLSD WHEN NOT IN USE.DON'T
    STORE NEAR HEAT/FLAME/STRONG OXIDANTS.
Other Precautions:EMPTY CNTNR RETAIN RESIDUE(LIQ/VAP/SOLID)-CAN BE
    DANGEROUS.DON'T PRESS/CUT/WELD/BRAZE/SOLDER/DRILL/GRIND/EXPO TO
    HEAT/IGN SOURCES:MAY EXPLO/CAUSE INJURY/DEATH.DON'T TRY TO
    CLEAN-DIFF TO REMOVE RESIDUE .USE APPROPR EQPMT.WASH HANDS AFT
    HNDLG.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE SUPPLIED-AIR RESP PROTECTION
    INCONFINED/ENCLOSED SPACE IF NEEDED.
Ventilation:USE LOC EXHAU TO CAPTURE VAP/MIST/FUME.PROVIDE VENTI SUFFI
    TO PREVENT EXCEEDING RECOMMENDED EXPO LIMIT/BUILDUP EXPLO GAS
Protective Gloves:CHEM-RESIST GLOVES IF NEEDED.
Eye Protection:SPLASH GOGG,FACE SHIELD.
Other Protective Equipment:CHEM-RESIST APRON/IMPERV CLOTH IF NEEDED TO
    AVOID CONTAM REG CLOTH WHICH COULD PROL/REP SKIN CONTACT.
Work Hygienic Practices:NO SMOKING/FLAME/IGN SOURCES.MIN BREATH
    VAP/MIST/FUME.AVOID PRO/REP SKIN CONTACT.REMOVE/WASH CONTAM CLOTH
    BEF REUSE.
Supplemental Safety and Health
FIREFIGHTING:USED TO FLUSH SPILLS AWAY FROM EXPO.MIN BREATH
    GAS/VAP/FUME/DECOMPO PROD.USE SUPPLIED-AIR BREATH EQPMT FOR
    ENCLSD/CONF SPACE/AS NEEDED.

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:ND
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:NEGLIGIBLE
Vapor Density:>AIR
Spec Gravity:0.8586/0.8816
pH:NP
Viscosity:100CST
Evaporation Rate & Reference:NEGLIGIBLE, REF NOT GIVEN
Solubility in Water:<0.1, NEGLIGIBLE
Appearance and Odor:CLEAR, DARK AMBER LIQUID, MILD BLAND PETROLEUM
    ODOR.
Percent Volatiles by Volume:NEGLIG
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATLS.
Stability Condition to Avoid:AVOID HEAT,OPEN FLAMES,OXIDIZING MATLS.
Hazardous Decomposition Products:FUMES,SMOKE,CO,S OXIDES,OTHER DECOMP
    PROD IN INCOMPLETE COMBUST.DEPENDS ON COMBUST CONDITONS.AIRBORNE
    SOLID/LIQ/GAS/PART

====================  Disposal Considerations  ====================

Waste Disposal Methods:COMPLY DRAIN/PROPERLY BUNG/PROMPTLY RETURN EMTPY
    CNTNR TO DR RECONDITIONS.DISPO ALL OTHER CNTNR IN ENVIRO SAFE
    MANNER/IAW GOVT REGS.DISPO IA ENVIRO SAFE MANNER IAW ALL GOVT REGS
    & FED/STATE/LOC REQMTS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***