=====================  Product Identification  =====================

MSDS NAME:QQ-S-571,SOLDER BAR
NIIN:00-247-6921
MSDS Number: BDNNH
=== Responsible Party ===
Company:METAL-TECH ALLOYS,INC.
Emergency Phone Num:(203)753-8498
CAGE:1DV67
=== Contractor Identification ===
Company:METAL-TECH ALLOYS INC
Address:27 JUDD ST
Box:2472
City:WATERBURY
State:CT
ZIP:06722
Country:US
Phone:203-753-8498/FAX 3865 (MR. JUHASZ)
CAGE:1DV67

=============  Composition/Information on Ingredients  =============

Name:LEAD  (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 57.5%
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: 41.5%
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9192

Name:ANTIMONY  (SARA III)
CAS:7440-36-0
RTECS #:CC4025000
Fraction by Wt: <0.5%
OSHA PEL:0.5 MG/M3
ACGIH TLV:0.5 MG SB/M3; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:COPPER  (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: <.08%
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2MG/M3 FUME; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:CADMIUM  (SARA III)
CAS:7440-43-9
RTECS #:EU9800000
Fraction by Wt: <0.3%
OSHA PEL:SEE 1910.1027
ACGIH TLV:0.01 MG/M3 DUST;9394
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:INH:CHILLS,FEVER,METAL FUME FEVER WHICH COME A
    FEW HOURS AFTER LARGE EXPOSURES.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/COPIOUS AMOUNT OF WATER;SKIN:WASH WITH SOAP &
    WATER;INHALE:REMOVE TO FRESH AIR,GIVE ARTIFICIAL RESPIRATION IF
    NEEDED;ING:GIVE 1-2 GLASSES WATER/MILK.INDUCE VOMIT ONLY IF
    CONSCIOUS & NOT CO NVULSE.SEE DR.IMM.;REMOVE CONTAM.CLOTH &
    LAUNDER.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:SPECIAL MIXTURES OF DRY CHEM.SUITABLE FOR METAL
    FIRES.
Fire Fighting Procedures:NONE SPECIFIED.
Unusual Fire/Explosion Hazard:METAL PROD.ARE NOT A FIRE
    HAZ;HOWEVER,DUST GENERATED IN GRINDING OPERATION MAY PRESENT
    FIRE/EXPL.HAZ

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP USING METHODS W/AVOID DUST GENERATION
    AND THE USE OF WATER,SUCH AS VACUUM.IF AIRBORNE DUST IS GENERATED
    DURING THE CLEAN UP,USE AN APPROP.NIOSH APPVD.RESPIRATOR.

======================	Handling and Storage  ======================

Handling and Storage Precautions:METAL ITSELF PRESENTS NO HEALTH
    HAZ.UNLESS IT IS WELDED,BURNED,GROUND OR CUT.
Other Precautions:DURING
    WELDING,BURNING,GROUNDING,CUTTING,EXCESS,AMOUNT OF FUMES/DUST MAY
    BE GENERATED.IT IS ADVISED THAT YOUR PARTICULAR OPERATION BE
    EVALUATED TO DETERMINE WHETHER OR NOT A HAZ.EXISTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPVD RESP.IF TLV IS EXCEEDED.
Ventilation:LOCAL EXHAUST TO ELIMINATE MISTS/FUMES/GASES.
Protective Gloves:WELDER'S GLOVES
Eye Protection:FACE SHIELD W/FILTR LENS.
Other Protective Equipment:SUBS.OK.CLOTH,ARM PROTECT,APRON,HAT,SHOULDR
    PROTECT.
Supplemental Safety and Health
MSDS DATED 11-01-85/OTHER INGRED:ALUMINUM<0.005%;SILVER
    0.01%;ZINC<0.005%;BISMUTH<0.25%;IRON<0.02%/

==================  Physical/Chemical Properties  ==================

HCC:N1
Appearance and Odor:BAR 0.375 INX0.6875 INX13.5 IN

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
SEE CASE HISTORY 87047A
Stability Condition to Avoid:NONE SPECIFIED
Hazardous Decomposition Products:FUMES OF METALS&METAL OXIDES,INCLUDING
    BASE METAL&COATING.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW LOCAL,STATE & FED REGS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***