=====================  Product Identification  =====================

MSDS NAME:ANDOK C, INDUSTRIAL LUBRICATING GREASE
NIIN:00-249-0908
MSDS Number: BDNQP
=== Responsible Party ===
Company:EXXON CO, USA
Emergency Phone Num:713-656-3424
CAGE:GO864
=== Contractor Identification ===
Company:EXXON CO, USA
Box:2180
CAGE:GO864
Company:EXXON COMPANY U.S.A.
Address:Box:2180
City:HOUSTON
State:TX
ZIP:77252-2180
Country:US
Phone:713-656-5949 / 713-656-3424
CAGE:29700

=============  Composition/Information on Ingredients  =============

Name:PETROLEUM HYDROCARBONS

Name:SODIUM SOAP

Name:ADDITIVES

=====================  Hazards Identification  =====================

Effects of Overexposure:SKIN: IRRIT W/PROLONGED/REPEATED CNTCT. GREASE
    INJECTED IN BODY: SERIOUS DELAYED SOFT TISSUE DAMAGE.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH THOROUGHLY W/SOAP & WARM WATER. EYES: FLUSH
    W/CLEAR WATER 15 MIN OR UNTIL IRRIT SUBSIDES. INJECTED UNDER SKIN:
    HI PRESS GREASE GUN INJECTION INJURY, REGARDLESS OF APPEARANCE OF
    WOUND, SEE M D IMMED. POSS LOSS OF AFFECTED AREA.

=====================  Fire Fighting Measures  =====================

Flash Point:390F COC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:FOAM, DRY CHEM, CO*2, WATER FOG, SPRAY
Fire Fighting Procedures:AIR-SUPP BRTH EQUIP. COOL CANS W/WATER SPRY.
    AVOID FUMES.
Unusual Fire/Explosion Hazard:DO NOT MIX OR STORE W/STRONG OXIDANTS
    LIKE LIQ CHLORINE OR CONC OXYGEN

==================  Accidental Release Measures  ==================

Spill Release Procedures:RECOVER FREE LUBRICANT. ADD ABSROBENT: SAND,
    SAWDUST, ECT TO SPILL AREA. KEEP PETROL PROD OUT OF SEWERS &
    WATERCOURSES BY DIKING OR IMPOUNDING. ADVISE AUTH IF PROD HAS
    ENTERED OR MAY ENTER SEWERS OR W ATERCOURSES.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CNTNRS CLOSED WHEN NOT IN USE. DO
    NOT HANDLE OR STORE NEAR HEAT, SPARKS, FLAME, STRONG OXIDANTS.
Other Precautions:AVOID BRTHNG OIL MIST. REMOVE LUBRICANT-SOAKED
    CLOTHING & LAUNDER BEFORE REUSE. DISCARD LUBRICANT-SOAKED SHOES.
    WASH SKIN THOROUGHLY W/SOAP & WATER AFTER HANDLING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NORM NOT NEEDED. IF NEC, USE NIOSH/MSHA APPRVD
    RESP DEVICE.
Ventilation:MFR REC LOCAL EXHST
Protective Gloves:CHEM RESIST
Eye Protection:SPLASH GOG/FACE SHLD
Other Protective Equipment:CHEM RESIST APRON OR OTHER PROT CLOTHING TO
    AVOID SKIN CNTCT
Supplemental Safety and Health
VAP PRESS <0.01, VAP DNSTY >12

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:>500F IBP
Spec Gravity:0.9500
Evaporation Rate & Reference:<0.01, N-BUAC
Solubility in Water:APPRECIABLE
Appearance and Odor:DARK BROWN GREASE, VERY SLT DISTNCT AROMATIC ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS: LIQ CHLORINE, CONC OXYGEN, NA/CA HYPCHLRITE
Hazardous Decomposition Products:FUMES, SMOKE, CO, SULFUR OXIDES IN
    CASE OF INCMPLT COMBUST

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF ABSORBED MATL AT APPRVD WASTE
    DISPOSAL SITE OR FACILITY. DISPOSE IAW FED, STATE, LOCAL CODES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***