=====================  Product Identification  =====================

MSDS NAME:786310 LACQUER C/N GLOSS YELLOW 13538
NIIN:00-248-2839
MSDS Number: BDNPQ
=== Responsible Party ===
Company:PRATT AND LAMBERT INC
Address:16116 E 13TH ST
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Info Phone Num:316-733-1361
Emergency Phone Num:716-873-6000 DOT EMER 8002553924
CAGE:61196
=== Contractor Identification ===
Company:PRATT AND LAMBERT INC
Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196

=============  Composition/Information on Ingredients  =============

Name:ISOBUTYL ACETATE
RTECS #:NP9100000
Fraction by Wt: 25%
ACGIH TLV:150 PPM

Name:ISOBUTYL ALCOHOL  (SARA III)
CAS:78-83-1
RTECS #:NP9625000
OSHA PEL:100 PPM
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: 15%
OSHA PEL:100 PPM

Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: <5%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:2-ETHOXY ETHYL ACETATE*
RTECS #:KP6475000
Fraction by Wt: <5%
ACGIH TLV:5PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:*OVEREXPOSR TO THIS MATRL MAY CAUS BIRTH
    DEFECTS & REPRODUCTV & BLOOD DISORDRS.MAY VE ABSORB THRU(SU

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOV FR EXPOSR & PROVID FRESH AIR.SPLASH(EYES)FLUSH
    IMMED. W/LG AMTS. OF WATR F/15 MIN.SPLASH (SKN)REMOV CONTAM
    CLOTHING & WASH ALL AFFECT AREA W/WATR.INGEST:DO NOT INDUCE
    VOMITING.CONSULT A DR . IMMED. IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:44F TCC 7C TCC
Extinguishing Media:CO*2,DRY CHEM,OR ALCOH FOAM,POLYMR FOAM PREF F/LG
    FIRES.
Fire Fighting Procedures:SELF-CONTND BREATH APPARAT SHLD BE AVAIL FOR
    FIREMEN.
Unusual Fire/Explosion Hazard:KP CONTNRS TIGHTLY CLOSED.ISOL FR
    HEAT,ELECTR EQPMT,SPARKS & OPN FLAM.CLOS CONTNRS MAY EXPLOD WHN(SU

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOV ALL SOURCES OF IGNIT(FLAMES,HOT
    SURFACES,(ELECTR,STATIC OR FRICTIONAL SPARKS).VENTILAT AREA & AVOID
    BREATHING VAPORS.REMOV W/INERT ABSORBENT & NON-SPARKING TOOLS.STEPS
    MUST BE TAKN TO PREVNT CON TAM OF GROUND WATER OR STREAMS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOV 120F.STORE LG QTY IN
    COMPLIANCE W/OSHA 1910.106.CONTNRS SHLD BE BONDED TO EA OTH &
    GROUNDED PROPERLY WHEN POUR INTO ANOTH CONTNR.
Other Precautions:DO NOT CUT OR WELD ON EMPTY CONTNR. DO NOT USE UNTIL
    ALL SAFETY PRECAUTIONS & MIXING DIRECTIONS HAVE BEEN READ & FULLY
    UNDERSTOOD BY THE USER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:MECH REPIRAT TO REMOV OVERSPRAY IN OUTDOOR OR
    OPEN AREA.
Ventilation:PROVID GEN DILUT/LOC EXHAUST,VENTILAT IN VOL TO KP BELOW
    TLV
Protective Gloves:SOLVNT IMPERBL
Eye Protection:SAFETY EYEWEAR.
Other Protective Equipment:USE PROTECTIV EQUIPMT TO PREVNT SKIN
    CONTACT.
Supplemental Safety and Health
UNUS FIRE/EXPLOSN HAZ:EXPOSED TO EXTREME HEAT. DO NOT APPLY TO VERY HOT
    SURFACES. EFFECT OF OVEREXPOS:SPRAY MISTS CONTAIN LEAD.LEAD
    POISONING IS CHARACT BY HDACH,DIZZ,STAGGERING GAIT,COMA,UNCO

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:175-724F
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:FIRES,HEAT & HOT SURFACES
Hazardous Decomposition Products:BURNING W/PRODUCE SMOKE & OXIDES OF
    CARBON & LEAD.
Conditions to Avoid Polymerization:DO NOT ADD DRIERS OR REACTIV CHEMS
    W/O TECH SUPERVISION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORD W/LOCAL,STATE & FED.
    REGULATIONS.INCINERATIN EPA APPROV FACILTY. DO NOT INCINERATE
    CLOSED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***