=====================  Product Identification  =====================

MSDS NAME:786310 LACQUER C/N GLOSS YELLOW 13538
NIIN:00-248-2838
MSDS Number: BDNPM
=== Responsible Party ===
Company:PRATT AND LAMBERT INC
Address:16116 E 13TH ST
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Info Phone Num:316-733-1361
Emergency Phone Num:716-873-6000 DOT EMER 8002553924
CAGE:61196
=== Contractor Identification ===
Company:PRATT AND LAMBERT INC
Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196

=============  Composition/Information on Ingredients  =============

Name:LEAD CHROMATE (OSHA PEL FOR LEAD FROM 29CFR
    1910.1025),(CRO3 CEILING 0.1 MG/M3)
CAS:7758-97-6
RTECS #:GB2975000
OSHA PEL:0.05 MG/M3 (PB)
ACGIH TLV:0.05MG/M3(CR)A2;8990

Name:ISOBUTYL ACETATE
RTECS #:NP9100000
Fraction by Wt: 25%
ACGIH TLV:150PPM

Name:ISOBUTYL ALCOHOL  (SARA III)
CAS:78-83-1
RTECS #:NP9625000
Fraction by Wt: 8%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: 15%
OSHA PEL:100 PPM

Name:2-ETHOXY ETHYL ACETATE*
RTECS #:KP6475000
Fraction by Wt: <5%
ACGIH TLV:5PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:*MAY CAUS BIRTH DEFECTS & REPRODUCTIVE & BLOOD
    DISORDERS.MAY BE ABSORBED THRU SKIN.INHAL:IRRIT (SUP)

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOV FR EXPOS & PROVID FRESH AIR.SPLASH EYES,FLUSH
    IMMED.W/LG AMTS OF WATR F/15 MIN.SPLASH SKIN,REMOV CONTAMINAT
    CLOTHING &WASH ALL AFECT AREA W/WATER.INGEST:DO NOT INDUC
    VOMITING.CONSULT A DR  IMMED.IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:44F TCC 7C
Extinguishing Media:CO*2,DRY CHEM,ALCOH FOAM,POLYMER FOAM PREF F/LARGE
    FIRES.
Fire Fighting Procedures:SELF ONTNED BREATH APPARAT SHLD BE AVAIL
    F/FIREMEN.
Unusual Fire/Explosion Hazard:KP CONTNRS TIGHTLY CLOS.ISOLAT FR
    HEAT,ELECT EQPMT,SPARKS,OPN FLAM.DO NOT APLY TO VERY HOT SURFACES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOV ALL SOURCES OF IGNIT(FLAMES,HOT
    SURFACES,ELECRRICAL,STATIC OR FRICTIONAL SPARKS).VENTIL AREA & AND
    BREATH VAP.REMOV W/INERT ABSORBENT & NON-SPARKING TOOLS.STEPS MUST
    BE TAKEN TO PREVENT CONTAMIN AT OF GROUND WATER OR STREAMS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOTSTORE ABOVE 120F.STORE LG
    QUANTITIES IN COMPLIANCE W/OSHA 1910.106.CONTRRS SHLD BE GROUNDED &
    BONDED TO THE RECEIVING CONTAINER.
Other Precautions:DO NOT CUT OR WELD ON EMPTY CONTAINER.DO NOT USE
    UNTIL ALL SAFETY PRECAUTIONS HAVE BEEN READ & FULLY UNDERSTOOD BY
    USER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:MECH RESPIRAT TO REMOV OVERSPRAY IN OUTDOOR OR
    OPEN AREA.
Ventilation:PRVID GEN DILUT/LOC EXHAUST VENTILAT IN VOL TO KP BELOW TLV
Protective Gloves:SOLVNT IMPERMBL
Eye Protection:EYEWEAR AGNST SPLA
Other Protective Equipment:USE PROTECTIV EQPMT TO PREVENT SKIN CONTACT
Supplemental Safety and Health
EFF. OF OVEREXPOS:OF NOSE,THROAT,EYES & POSS. DIZZINESS & NAUSEA. SPRAY
    MISTS CONTAIN LEAD.LEAD POISONING IS CHRCTERIZED BY
    HEADACH;DIZZ,STAGGERING GAIT,CONFUSION,UNCONSCIOUSNESS OR COMA.

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:175-724F
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:74

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTCT W/STRONG ACIDS OR ALKALINE MARERIALS
Stability Condition to Avoid:FIRES,HEAT & HOT SURFACES
Hazardous Decomposition Products:BURNING WILL PRODUC SMOKE & OXIDES OF
    CARBON & LEAD
Conditions to Avoid Polymerization:DO NOT AD DRIERS OR REACTIVE CHEMS
    W/O TECHNICAL SUPERVISION

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORD W/LOCAL,STATE & FEDERAL
    REGULATIONS.INCINERATE IN EPA APPROVED FACILITY. DO NOT INCINERATE
    CLOSED CONTNRS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***