=====================  Product Identification  =====================

MSDS NAME:DCC-4163 CONCEPT ACRYLIC URETHANE
NIIN:00F052826
MSDS Number: CDCDM
=== Responsible Party ===
Company:PPG INDUSTRIES INC COATINGS & RESINS GROUP
Address:4325 ROSANNA DR
Box:9
City:ALLISON PARK
State:PA
ZIP:15101-5000
Country:US
Info Phone Num:412-492-5555
Emergency Phone Num:304-843-1300
CAGE:DO542
=== Contractor Identification ===
Company:PPG INDUSTRIES INC. COATINGS & RESINS GP
Address:4325 ROSEANNA DR PO BOX 9
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Phone:412-492-5555
CAGE:DO542

=============  Composition/Information on Ingredients  =============

Name:ACRYLIC RESIN
Fraction by Wt: 10-15%

Name:TITANIUM DIOXIDE, TITANIUM OXIDE  (SUSPECTED ANIMAL
    CARCINOGEN, IARC GROUP 3)	*96-4*
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 30-35%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM (DUST)

Name:PHTHALOCYANINE GREEN PIGMENT
CAS:14302-13-7
RTECS #:GL7500000
Fraction by Wt: 10-15%

Name:NICKEL,BIS(3-((4-CHLOROPHENYL)AZO)-2,4(1H, 3H)-	       
    QUINOLINEDIONATO)
CAS:51931-46-5
Fraction by Wt: 5-10%

Name:BUTANOL, N-BUTYL ALCOHOL, PROPYL CARBINOL, BUTYL ALCOHOL
    *96-4*
CAS:71-36-3
RTECS #:EO1400000
Fraction by Wt: 2-5%
Other REC Limits:300 MG/CUM
OSHA PEL:100 PPM
ACGIH TLV:C 152 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:XYLENE, DIMETHYLBENZENE, XYLOL     (IARC - GROUP 3)  *96-4*
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 25-30%
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:SOLVENT NAPHTHA, PETROLEUM, LIGHT AROMATIC, HIGH FLASH
    AROMATIC NAPHTHA, C8&10 AROMATIC HYDROCARBON	    *96-4*
CAS:64742-95-6
RTECS #:WF3400000
Fraction by Wt: 2-5%

Name:PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,
    1-METHOXY-2-PROPANOL ACETATE
CAS:108-65-6
RTECS #:AI8925000
Fraction by Wt: 10-15%

Name:ETHYLENE GLYCOL MONOBUTYL ETHER ACETATE, BUTYL CELLOSOLVE
    ACETATE, 2-BUTOXYETHYL ACETATE * 96-4 *
CAS:112-07-2
RTECS #:KJ8925000
Fraction by Wt: 2-5%
OSHA PEL:50 PPM
ACGIH TLV:25 PPM

Name:ETHYL 3-ETHOXYPROPIONATE, PROPANOIC ACID, 3-ETHOXY-, ETHYL 
    ESTER   *96-4*
CAS:763-69-9
RTECS #:UF3325000
Fraction by Wt: 5-10%

Name:BUTYL ACETATE (N-BUTYL ACETATE)   *96-4*
CAS:123-86-4
RTECS #:AF7350000
Fraction by Wt: 20-25%
Other REC Limits:150 PPM
OSHA PEL:710 MG/CUM
ACGIH TLV:713 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:FILM FORMERS, RESINS, AND ADDITIVES
Fraction by Wt: 35-40%

Name:NICKEL COMPOUNDS AS NI
Fraction by Wt: 5-10%

Name:GLYCOL ETHERS
Fraction by Wt: 2-5%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYES: SEVERE
    IRRITATION. SKIN: MODERATE IRRITATION & MAY BE ABSORBED.
    INHALATION: HARMFUL, IRRITATES EYES, NOSE & THROAT. IRRITATION OF
    THE RESPIRATORY SYSTEM, PERMANENT BRAI N DAMAGE & NERVOUS SYSTEM
    DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, WATERING EYES, HEADACHES, NAUSEA,
    DIZZINESS, LOSS OF COORDINATION, REDNESS, ITCHING, BURNING
    SENSATION, VISUAL DISTURBANCES, DRYNESS, CRACKING, BURNING,
    SWELLING.

=======================  First Aid Measures  =======================

First Aid:INGESTION: GIVE 1/2 GLASSES OF WATER. DON'T INDUCE VOMITING.
    EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 30 MINS. SKIN: FLUSH
    W/PLENTY OF WATER, FOLLOWED BY WATERLESS HAND CLEANER, SOAP &
    WATER. INHALA TION: REMOVE TO FRESH AIR. GIVE CPR & OTHER
    SUPPORTIVE MEASURES AS REQUIRED. OBTAIN MEDICAL ATTENTION IN ALL
    CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:72F
Lower Limits:1.2
Extinguishing Media:CO2, DRY CHEMICAL, UNIVERSAL AQUEOUS FILM FORMING
    FOAM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, BUT MAY BE
    USED TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG NOZZLES ARE
    PREFERABLE. FIRE-FIGHTERS SHOULD WEAR SCBA.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT. DON'T APPLY ON HOT SURFACES. TOXIC GASES
    MAY FORM WHEN CONTACTED BY FLAME/HOT SURFACES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
    EQUIPPED W/PROPER PROTECTIVE EQUIPMENT SHOULD BE PERMITTED. REMOVE
    SOURCES OF IGNITION. TAKE UP W/SAWDUST, VERMICULITE/OTHER ABSORBENT
    MATERIAL & PLACE INTO  CONTAINERS FOR DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE AMOUNTS
    IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE. KEEP CONTAINERS
    TIGHTLY CLOSED. ISOLATE FROM IGNITION SOURCES.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
    FREE FALL OF LIQUIDS IN EXCESS OF A FEW INCHES. INTENTIONAL MISUSE
    BY DELIBERATELY CONCENTRATING & INHALING THE CONTENTS CAN BE
    HARMFUL/FATAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:OVEREXPOSURE TO VAPORS MAY BE PREVENTED BY
    USING, VAPOR EXHAUST/FRESH AIR ENTRY. NIOSH/MSHA APPROVED (TC-23C)
    AIR PURIFYING/AIR SUPPLIED (TC-19C) RESPIRATORS MAY ALSO REDUCE
    EXPOSURE.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST: KEEP CONCENTRATIONS <
    LIMITS. REMOVE DECOMPOSTION PRODUCTS DURING WELDING/FLAME CUTTING.
Protective Gloves:NITRILE RUBBER/NEOPRENE RUBBER
Eye Protection:CHEMICAL TYPE SPLASH GOGGLES
Other Protective Equipment:FULL FACE SHIELD, PROTECTIVE CLOTHING,
    IMPERMEABLE APRON.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
    BEFORE REUSE.
Supplemental Safety and Health
BOILING POINT: 179.6-384.8F.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:(SEE SUPP)
Vapor Pres:8
Vapor Density:>1
Spec Gravity:1-1.4
Evaporation Rate & Reference:(BUO AC = 100): 89
Solubility in Water:INCOMPLETE
Appearance and Odor:VISCOUS LIQUID W/A CHARACTERISTIC ODOR
Percent Volatiles by Volume:50-65

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, ELECTRICAL EQUIPMENT, SPARKS, OPEN
    FLAMES, HOT SURFACES.
Hazardous Decomposition Products:CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
    REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
    THROUGH AN APPROVED WASTE MANAGEMENT FACILITY. UN1283.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***