=====================  Product Identification  =====================

MSDS NAME:IE-10W30 QPL ML-3190 MIL-L-46152D
NIIN:00-256-6411
MSDS Number: BDPGC
=== Responsible Party ===
Company:IMPERIAL OIL CO.,INC.
Address:ORCHARD PLACE
City:MORGANVILLE
State:NJ
ZIP:07751
Country:US
Info Phone Num:201-591-9400
Emergency Phone Num:201-591-9400
CAGE:58563
=== Contractor Identification ===
Company:IMPERIAL OIL CO INC
Address:FOOT OF ORCHARD PL
Box:279
City:MORGANVILLE
State:NJ
ZIP:07751
Country:US
Phone:732-591-9400/FAX: 732-591-8825
CAGE:58563

=============  Composition/Information on Ingredients  =============

Name:LUBE OIL BASE STOCK/REFINED HEAVY PARAFFINIC DISTILLATES
CAS:64741-88-4
Fraction by Wt: 84.10%
Other REC Limits:NONE SPECIFIED
OSHA PEL:5 MG/M3 (OIL MIST)
ACGIH TLV:5 MG/M3 (OIL MIST)

Name:PROPRIETARY ADDITIVES - FOR MORE INFORMATION CONTACT EXXON
    CHEMICAL CORP.
Fraction by Wt: 15.90%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Explanation of Carcinogenicity:NO DATA AVAILABLE
Effects of Overexposure:DUE TO LOW ORDER OF DERMAL & ORAL TOXICITY, THE
    SIGNS & SYMPTOMS OF OVER EXPOSURE ARE UNKNOWN.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF AILMENTS
    OR WITH A PRE-EXISTING DISEASE INVOLVING THE EYES & SKIN MAY BE AT
    INCREASED RISK FROM EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:INHALATION:REMOVE TO FRESH AIR.GET MEDICAL ATTENTION, IF
    NEEDED.EYES:IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES HOLDING
    EYELIDS OPEN.GET MEDICAL ATTENTION.SKIN:REMOVE CONTAMINATED
    CLOTHING.WASH FIRST  WITH WATERLESS SOAP,THEN SOAP AND
    WATER.INGESTION:DO NOT INDUCE VOMITING. GET IMMEDIATE MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:445F,229C
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
    CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
    FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
    SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE & CONTAIN SPILL WITH INERT MATERIAL
    (SAND,EARTH,FULLERS EARTH ETC.).TRANSFER LIQUID TO DRUMS OR OTHER
    CONTAINERS FOR RECOVERY OR DISPOSAL.AREA MAY BE SLIPPERY.CARE
    SHOULD BE TAKEN TO AVOID FALLS. PREVENT MATERIAL FROM GETTING INTO
    SEWERS & WATERS
Neutralizing Agent:NOT APPLICABLE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:THESE LUBRICANTS BECOME VERY VISCOUS
    WHEN STORED AT LOW TEMPERATURE. THEY CONGEAL AT TEMPERATURE FROM
    -12 TO -32 C.
Other Precautions:USE PRODUCT WITH CAUTION AROUND OPEN FLAMES, HEAT,
    SPARKS, PILOT LIGHTS & STATIC ELECTRICITY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE SUPPLIED-AIR RESPIRATORY PROTECTION IN
    CONFINED OR ENCLOSED SPACES IF NEEDED.
Ventilation:MECHANICAL (GENERAL) ROOM VENTILATION IS NORMALLY ADEQUATE.
Protective Gloves:IMPERVIOUS
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:EYE WASH STATION
Work Hygienic Practices:MINIMIZE BREATHING VAPOR,MIST OR FUMES.REMOVE
    CONTAMINATED CLOTHING & LAUNDER BEFORE RE-USE.DISCARD OIL-SOAKED
    SHOES.
Supplemental Safety and Health
"EMPTY" CONTAINERS RETAIN RESIDUE (LIQUID AND/OR VAPOR) & CAN BE
    DANGEROUS.DO NOT PRESSURIZE,CUT,WELD,BRAZE,SOLDER DRILL,GRIND OR
    EXPOSE THEM TO HEAT,FLAME,SPARKS OR OTHER SOURCES OF IGNITION:THEY
    MAY  EXPLODE AND CAUSE INJURY.DO NOT CLEAN THEM.

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:600F,316C
Melt/Freeze Pt:M.P/F.P Text:0
Vapor Pres:1
Vapor Density:1
Spec Gravity:1
Evaporation Rate & Reference:<1 (N-BUTYL ACETATE=1)
Solubility in Water:0
Appearance and Odor:DARK-AMBER-NO ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
    SULFUR & NITROGEN COMPOUNDS

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF CONTAMINATED DIKING MATERIAL
    ACCORDING TO CURRENT FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***