=====================  Product Identification  =====================

MSDS NAME:TP0 860 TTP381E 2B ULTRABLUE IN LSO TINT
NIIN:00-255-8060
MSDS Number: BDPFF
=== Responsible Party ===
Company:KALCOR COATINGS
Address:37721 STEVENS BLVD
City:WILLOUGHBY
State:OH
ZIP:44094-6231
Country:US
CAGE:DO396
=== Contractor Identification ===
Company:KALCOR COATING CO
Address:37721 STEVENS BLVD
Box:City:WILLOUGHBY
State:OH
ZIP:44094-6231
Country:US
Phone:216-946-4700
CAGE:33201
Company:KALCOR COATINGS COMPANY
Address:37721 STEVENS BLVD
City:WILLOUGHBY
State:OH
ZIP:44094
Phone:800-424-9300 CHEMTREC
CAGE:DO396

=============  Composition/Information on Ingredients  =============

Name:MINERAL SPIRITS
CAS:64742-88-7
Fraction by Wt: <5%
Other REC Limits:100PPM PEL500 PPM
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Effects of Overexposure:INHAL:ANESTHETIC IRRITATION OF THE RESP TRACT
    OR ACUTE NERVOUS SYSTEM DEPRESSION CHARACTERIZED BY
    HEADACHE.DIZZINESS STAGGERING,GAIT CONFUSION,UNCONSCIOUS OR COMA.

=======================  First Aid Measures  =======================

First Aid:INHAL:FUMES REMOVE FROM EXPOSURE.RESTORE BREATHING.KEEP WARM
    & QUIET,NOTIFY PHYS.EYES:FLUSH IMMED W/ COPIOUS QUANTITIES OF
    RUNNING H*2O FOR AT LEAST 15 MIN.TAKE TO A PHYS FOR DEFINITIVE MED
    TREATMENT( SPLASH).SKIN:RMOVE W/ SOAP & H*2O REMOVE CONTAMINATED
    CLOTHING.

=====================  Fire Fighting Measures  =====================

Flash Point:100F,37,78C
Lower Limits:1.0
Extinguishing Media:FOAM CO*2,DRY CHEMICAL,H*2O FO6.
Fire Fighting Procedures:USE FULL PROTECTIVE EQUIPMENT,INCLUDING SCBA.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM SOURCES OF IGNITION CLOSED
    CONTR MAY EXPLODE,WHEN EXPOS TO EXTREME HEAT.APPLI TO HOT SURFACES
    REQUIRE SPECIAL PRECAUTIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION(FLAMES,HOT
    SURFACES,& ELECTRICAL,STATIC OR FRICTIONAL SPARKS)AVOID BREATHING
    VAPORS.VENT AREA.REMOVE W/ INERT ABSORBENT & NON SPARKING TOOLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120 STORE LG QTY IN
    BUILDINGS DESIGNED FOR STORAGE OF NFPA CLASS 2 FLAMMABLE LIQUIDS.
Other Precautions:DO NOT TAKE INTERNALLY.CONTRS SHOULD BE GROUNDED WHEN
    POURING.DO NOT FLAME CUT BRAZE OR WELD WITHOUT NIOSH APROVED
    RESPIRATOR OR APPROPRIATE VENTILATION/

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:OUTDOOR/OPEN AREAS USE NIOSH APPROVED MECH
    FILTER RESP TO REMOVE SOLID AIR BORNE PART.RESTRICTED VENT.NIOSH
    APPROVED CHEM MECH FILTER TO REMOVE PARTICULATE & GAS &
    VAPOR.CONFINED AREA USE NIOSH APPROV ED AIR LINE.
Ventilation:PROVIDE GEN DILUT/LOCAL EXHAUST VENT I/VOL & PATTER N TO
    KEEP TLV,MOST HAZ INGRED BELOW ACCEPTABLE LIMIT.
Protective Gloves:REC
Eye Protection:SAFETY GLASSES OF GOGGLE
Other Protective Equipment:NONE
Supplemental Safety and Health
PART NO:PASTE.NT/GAL 13.0+/-0.2 /X: QUALIFIED UNDER MIL SPEC TT-P-381E

==================  Physical/Chemical Properties  ==================

HCC:F4
NRC/State Lic Num:NA
Boiling Pt:B.P. Text:300-385F
Vapor Density:HEAV > AIR
Percent Volatiles by Volume:8+/-1

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZIERS.
Hazardous Decomposition Products:WHEN HEATED TO DECOMP AS IN
    WELDING,WILL PRODUCE FUMES CONTAINING OXIDES OF CARBON.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW LOCAL STATE & FEDERAL REGS DO NOT
    INCINERATE CLOSED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***