=====================  Product Identification  =====================

MSDS NAME:R1 FAST CAST 891B
NIIN:00N072815
Kit Part:Y
MSDS Number: CDZQJ
=== Responsible Party ===
Company:GOLDENWEST MFG INC
Box:1148
City:CEDAR RIDGE
State:CA
ZIP:95924
Country:US
Info Phone Num:916-272-1133
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:4V804
=== Contractor Identification ===
Company:GOLDENWEST MFG INC
Box:City:CEDAR RIDGE
State:CA
ZIP:95924
Country:US
Phone:916-272-1133
CAGE:4V804

=============  Composition/Information on Ingredients  =============

Name:POLYETHER POLYOL
Fraction by Wt: 42-46%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:1,3-PENTANDIOL, 2,2,4-TRIMETHYL-, DIISOBUTYRATE (ESTER);
    (HIGH MOLECULAR WEIGHT PLASTICIZER)
CAS:6846-50-0
RTECS #:SA1420000
Fraction by Wt: 53-58%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NO TOXICITY INFO IS AVAIL ON THIS
    SPECIFIC PREPARATION; THIS HLTH HAZ ASSESSMENT IS BASED ON INFO
    THAT IS AVAIL ON PROPERTIES OF ITS COMPONENTS. ACUTE: INHAL/SKIN:
    LOW HAZ FOR USUAL INDUS HNDLG. EYE:  LIQ IS MINIMALLY IRRIT.
    INGEST: INGEST MAY RSLT IN GASTRIC UPSET. CHRONIC: NONE SPECIFIED
    BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH MATL OFF SKIN W/PLENTY OF SOAP & WATER. SEEK MED
    ATTN IF IRRIT DEVELOPS/PERSISTS AFTER AREA IS WASHED. DO NOT REUSE
    CLTHG UNTIL CLEANED. EYES: FLUSH W/COPIOUS AMTS OF WATER FOR AT
    LEAST 15  MIN HOLDING EYELIDS OPEN. REFER INDIVIDUAL TO MED ATTN
    FOR IMMED FOLLOW-UP. INGEST: CONSULT MD. INHAL: MOVE TO AREA FREE
    OF RISK TO FURTHER EXPOS. ADMIN OXYGEN/ARTF RESP AS NEEDED. GET MED
    ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:262F,128C
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, HIGH EXPANSION
    (PROTEINIC) CHEMICAL FOAM.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . CONTRS EXPOSED TO INTENSE HEAT FROM FIRES SHOULD BE
    COOLED W/WATER TO PVNT VAP PRESS (SUP DAT)
Unusual Fire/Explosion Hazard:COMBUSTIBLE LIQUID.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL POSS IGNIT SOURCES. MAJOR SPILL:
    LARGE QUANTITIES MAY BE PUMPED INTO STOR/SALVAGE VESSELS. MINOR
    SPILL: ABSORB MATL W/SAWDUST/OTHER ABSORB. SHOVEL INTO SUITABLE
    CONTRS FOR PROPER DISP. CLEA NUP: FLUSH AREA W/WATER TO REMOVE
    TRACERESIDUE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN TIGHTLY SEALED CONTAINERS TO
    PROTECT FROM ATMOSPHERIC MOISTURE. EDUCATE AND TRAIN EMPLOYEES IN
    SAFE USE OF PRODUCT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF RESPIRATORY PROTECTION IS NEEDED, USE NIOSH
    APPROVED RESPIRATOR FOR ORGANIC VAPOR.
Ventilation:LOCAL EXHAUST SHOULD BE SUFFICIENT TO CONTROL AIRBORNE
    LEVELS.
Protective Gloves:CHEMICAL-RESISTANT GLOVES RECOMMENDED.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE. EMERGENCY EYEWASH AND DELUGE SHOWER
    MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:MINIMIZE EXPOSURE IN ACCORDANCE WITH GOOD
    HYGIENE PRACTICE.
Supplemental Safety and Health
FIRE FIGHT PROC: BUILD-UP WHICH COULD RSLT IN CONTR RUPTURE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:536F,280C
Vapor Pres:4 @ 121C
Spec Gravity:0.98
Solubility in Water:PARTIAL
Appearance and Odor:WHITE LIQUID, SLIGHTLY FRUITY ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS AND ISOCYANATES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:BY HIGH HEAT AND FIRE: CARBON
    MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MUST BE DISPOSED OF ACCORDING TO FEDERAL,
    STATE AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS. DECONTAMINATE
    CONTAINERS PRIOR TO DISPOSAL. EMPTY CONTAINERS SHOULD BE CRUSHED TO
    PREVENT REUSE. DO N OT HEAT/CUT EMPTY CONTAINER W/ELECTRIC/GAS
    TORCH.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***