=====================  Product Identification  =====================

MSDS NAME:XUPER 2240
NIIN:00-067-7212
MSDS Number: CDZSV
=== Responsible Party ===
Company:EUTECTIC CORPORATION
Address:40-40 172ND STREET
City:FLUSHING
State:NY
ZIP:11358-2799
Country:US
Info Phone Num:718-358-4000
Emergency Phone Num:718-358-4000
CAGE:EO060
=== Contractor Identification ===
Company:EUTECTIC CORP
Address:9625-J SOUTHERN PINE BLVD
Box:City:CHARLOTTE
State:NC
ZIP:28273
Country:US
Phone:704-527-9800/ 800-221-1433
CAGE:72271
Company:EUTECTIC CORPORATION
CAGE:EO060

=============  Composition/Information on Ingredients  =============

Name:NICKEL (SARA 313) (CERCLA)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 40-50%
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9495

Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
OSHA PEL:15 MG/M3 (MFR)
ACGIH TLV:10 MG/M3 (MFR)

Name:COPPER (SARA 313) (CERCLA)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 5-10%
OSHA PEL:0.1MG/M3 FUME/1 DUST
ACGIH TLV:0.2 MG/M3 FUME; 9495
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:CALCIUM CARBONATE
CAS:1317-65-3
RTECS #:EV9580000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9495

Name:GRAPHITE
CAS:7782-42-5
RTECS #:MD9659600
OSHA PEL:15 MPPCF; Z-3
ACGIH TLV:2 MG/M3 RDUST; 9495

Name:POTASSIUM SILICATE
CAS:1312-76-1
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:FLUORSPAR
CAS:14542-23-5
OSHA PEL:2.5 AS F MG/M3 (MFR)
ACGIH TLV:2.5 AS F MG/M3 (MFR)

Name:SUPDAT:OR OXIDATION OF MATLS PLUS THOSE OF BASE METAL &
    COATING. REASONABLY EXPECTED CONSTITUENTS OF FUME MAY (ING 9)
RTECS #:9999999ZZ

Name:ING 8:INCLUDE:COMPLEX OXIDES OF METALS LISTED, FLUX COATING
    MAY PRODUCE FLUORIDE CMPDS, METAL OXIDES, CARBON (ING 10)
RTECS #:9999999ZZ

Name:ING 9:& SILICA. GASEOUS RXN PRODS MAY INCL OZONE, CARBON
    MONOXIDE, CARBON DIOXIDE, NITROGEN OXIDES, & CERTAIN (ING 11)
RTECS #:9999999ZZ

Name:ING 10:INERT GASES USED AS SHIELDING GASES. ONE REC WAY TO
    DETERM COMPOSITION & QTY OF FUMES & GASES TO WHICH (ING 12)
RTECS #:9999999ZZ

Name:ING 11:WORKERS ARE EXPOSED IS TO TAKE AN AIR SAMPLE INSIDE
    THE WORKER'S HELMET IF WORN/IN THE WELDER'S BREATHING ZONE.
RTECS #:9999999ZZ

Name:EFTS OF OVEREXP:METAL FUME FEVER:CAN BE CAUSED BY INHAL OF
    COMPOUNDS DURING OPERATIONS. SYMPTOMS ARE SIMILAR TO (ING 14)
RTECS #:9999999ZZ

Name:ING 13:INFLUENZA TYPE SICKNESS INCLUDING CHILLS, FEVER,
    HEAD & MUSCLE ACHE, TIGHTNESS OF CHEST, DRYNESS OF NOSE (ING 15)
RTECS #:9999999ZZ

Name:ING 14:& MOUTH, MUSCULAR PAIN, NAUSEA & VOMIT. SYMPTOMS
    USUALLY OCCUR W/IN SEVERAL HRS AFTER OVEREXP & MAY LAST (ING 16)
RTECS #:9999999ZZ

Name:ING 15:6-24 HRS. COPPER:INHAL OF FRESH COPPER OXIDE FUME
    MAY CAUSE METAL FUME FEVER. FLUORIDE CMPD:SHORT TERM (ING 17)
RTECS #:9999999ZZ

Name:ING 16:OVEREXP MAY CAUSE IRRIT OF EYES & RESP TRACT.
    FLUORIDES HAVE A SOAPY/SALTY TASTE & MAY CAUSE NAUSEA, (ING 18)
RTECS #:9999999ZZ

Name:ING 17:VOMIT, ABDOMINAL PAIN, BLEEDING OF STOMACH,
    SHORTNESS OF BRTH, CONVUL, MUSCULAR WEAK/DISTURBED VISION (ING 19)
RTECS #:9999999ZZ

Name:ING 18:IF INGESTED. LONG TERM OVEREXP MAY CAUSE EXCESSIVE
    CALCIFICATION OF BONES & LIGAMENTS OF RIBS, PELVIS & (ING 20)
RTECS #:9999999ZZ

Name:ING 19:SPINAL COLUMN. MAY ALSO CAUSE SKIN BURNS &/RASH.
    GRAPHITE:EXCESS INHAL MAY RSLT IN IRRIT OF MUC MEMB (ING 21)
RTECS #:9999999ZZ

Name:ING 20:& LONG TERM INHAL MAY RSLT IN SILICOSIS. DUST MAY
    CAUSE IRRIT OF EYES. IRON:OVEREXPOS MAY LEAD TO GENERAL(ING 22)
RTECS #:9999999ZZ

Name:ING 21:IRRIT OF RESP TRACT IF INHALED. LONG TERM OVEREXP
    MAY CAUSE SIDEROSIS WHICH MAY ALSO AFFECT PULMONARY (ING 23)
RTECS #:9999999ZZ

Name:ING 22:FUNCTION. LUNGS WILL CLEAR IN TIME WHEN EXPOS
    CEASES. NICKEL:SHORT TERM EFTS FROM INHAL OF FUMES MAY BE (ING 24)
RTECS #:9999999ZZ

Name:ING 23:METALLIC TASTE, NAUS, TIGHTNESS OF CHEST,
    FEVER/ALLERGIC RXN. SKIN & EYE CNTCT MAY ALSO CAUSE ALLERGIC (ING
    25)
RTECS #:9999999ZZ

Name:ING 24:REACTIONS. LONG TERM OVEREXPOSURE MAY CAUSE FIBROSIS
    OR PHENUMOCONIOSIS.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:INHAL:FUMES CAN BE DANGEROUS TO YOUR
    HLTH & OVEREXP CAN CAUSE LUNG DMG &/OTHER ORGAN DMG. EYE/SKIN
    CNTCT:ARC RAYS & ULTRAVIOLET LIGHT CAN INJURE EYES & BURN SKIN. LIQ
    MAY CAUSE IRRIT/POSS CHEM BURNS.  ELECTRICAL SHOCK CAN KILL.
    INGEST:DANGER!MAY BE HARMFUL/FATAL IF SWALLOWED. GENERAL WELDING
    FUMES:GASES(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:IARC MONOGRAPHS ON EVALUATION OF
    CARCIN RISK OF CHEM TO MAN, VOL 49, PG 257, 1990:GROUP 2B. NTP 7TH
    (SUPDAT)
Effects of Overexposure:HLTH HAZ:& DUSTS CAN BE DANGEROUS TO YOUR HLTH.
    CERTAIN MED STUDIES HAVE SUGGESTED THAT LUNG DMG CAN RSLT FROM
    OVEREXP TO THESE FUMES. SHORT TERM OVEREXP MAY RSLT IN DIZZ,
    NAUSEA/DRYNESS/IRRIT OF NOSE , THROAT/EYES. EXCESSIVE OVEREXP MAY
    CAUSE BRONCHIAL ASTHMA, LUNG FIBROSIS, PNEUMOCONIOSIS/SIDEROSIS.
    (ING 13)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
    RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

=======================  First Aid Measures  =======================

First Aid:INHAL:MOVE TO FRESH AIR SOURCE. CNTCT MD & ADVISE ON INGREDS
    LISTED IN SECTION 2. SKIN:THORO WASH HANDS/EFFECTED AREAS W/SOAP &
    H*2O TO REMOVE ALL RESIDUE. IF RASH/BURN DEVELOPS, CONSULT MD.
    EYE:THORO  FLUSH W/H*2O FOR AT LEAST 15 MIN TO REMOVE ALL RESIDUE.
    OBTAIN PROMPT MED ADVICE FOR FLUXES & CHEM AIDS. ADVISE MD OF
    INGRED LISTED IN SECTION 2. INGEST:CALL MD &/POIS CTL CTR. ADVISE
    OF INGRED.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CO*2, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP . TOX
    FUMES MAY BE PRODUCED-USE APPRVD SCBA. SEE HAZ DECOMP PROD.
Unusual Fire/Explosion Hazard:REFER TO ANSI Z49.1 FOR FIRE PVNT DURING
    USE OF WELDING & ALLIED PROCESSES. ELECTRODE:NONFLAMMABLE, WELDING
    ARC, SPARKS & FLAMES CAN IGNITE COMBUST/ (SUPDAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE APPROP MEASURES TO KEEP AIRBRONE DUST
    LEVELS CONTAINED I/A/W/EXPOS LEVELS OF SECTION 2. SEE ALSO SECTION
    8 PROPER SAFE HANDLING & STORAGE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:READ & UNDERSTAND PROD LBL INFO FOR
    PROPER PROC & USE. WEAR HEAD & BODY PROT WHICH HELP TO PVNT INJURY
    FROM RADIA, SPKS, & ELECTRICAL SHOCK.
Other Precautions:SEE ANSI Z49.1 'SFTY IN WELDING & CUTTING', & CHAPTER
    11 OF 'THERM SPRAYING', PUB BY AMERICAN WELDING SOCIETY & OSHA PUB
    2206 (29 CFR 1910) FOR MORE DETAIL. TRAIN WORKERS NOT TO TOUCH LIVE
    ELEC PARTS	& INSULATE FROM WORK & ELEC GROUND.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF THE WORK STATION IS NOT PROPERLY VENTILATED
    TO EXHAUST ALL FUMES, VAPORS AND DUSTS BELOW THE RECOMMENDED
    EXPOSURE LIMITS, USE A NIOSH APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT WORK SITE TO KEEP ALL
    DUST FROM WORKER'S BRTHG ZONE & GEN AREA. THE FUME/DUST PLUME.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER .
    ARM PROTECTORS, APRONS, HATS AS WELL AS DARK PROF CLTHG.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:FLAMMABLES. SOME FLUXES & CHEM AIDS MAY GIVE OFF HYDROGEN
    CHLORIDE, PHOSGENE & CHLORINE GASES. CANS, UNDER PRESS, &
    FLAMMABLES MAY EXPLODE. EXPLAN OF CARCIN:ANNUAL RPT ON CARCIN,
    1994:ANTIC	TO BE CARCIN. ANIMAL:LUNGS, NASAL CAVITIES. HAZ DECOMP
    PROD:INCL THOSE ORIGINATING FROM VOLATILIZATION, RXN, (ING 8)

==================  Physical/Chemical Properties  ==================

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DECOMP PROD GENERATED ARE DIFFERENT IN
    PERCENT & FORM FROM INGREDIENTS LISTED. DECOMP PROD OF NORMAL
    OPERATION (SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF WASTE MATL, POWDERS, GRINDING/FILTER
    RESIDUES IN ENVIRON SENSITIVE MANNER I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***