=====================  Product Identification  =====================

MSDS NAME:NS-3913-G1
NIIN:00-506-8497
MSDS Number: CFKRF
=== Responsible Party ===
Company:SYN-TECH LTD
Address:1433 W.FULLER AVE
City:ADDISON
State:IL
ZIP:60101
Country:US
Info Phone Num:708-620-7050
Emergency Phone Num:630-620-7050
CAGE:53592
=== Contractor Identification ===
Company:SYN-TECH LTD
Address:1433 W.FULLERTON AVE
City:ADDISON
State:IL
ZIP:60101
Country:US
Phone:630-629-7060
CAGE:53592

=============  Composition/Information on Ingredients  =============

Name:METHYL ALCOHOL (METHANOL) (SARA 313) (CERCLA)
CAS:67-56-1
RTECS #:PC1400000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:S, 200 PPM
ACGIH TLV:S,200PPM/250STEL; 96
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:DITRIDECYL ADIPATE
CAS:16958-92-2
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:DO NOT INGEST;AVOID PROLONGED SKIN
    CONTACT;THIS PRODUCT IS MINIMALLY IRRITATING.PROL/REP SKIN CONTACT
    TENDS TO REMOVE SKIN OILS & MAY CAUSE SKIN IRRITATION.
Explanation of Carcinogenicity:PER
    MSDS:CARCINOGENICITY:NTP/IARA/OSHA:NA.
Effects of Overexposure:MILD IRRITATION OF SKIN & MUCOUS MEMBRANE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:DO NOT INDUCE VOMITING;SEEK MED ATTN;WASH SKIN
    W/SOAP/WATER;FLUSH EYES W/WATER;REMOVE FROM EXPOSURE TO FRESH AIR.

=====================  Fire Fighting Measures  =====================

Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE CAUTION-CARBON MONOXIDE & CARBON DIOXICE
    MAY BE PRESENT DUE TO INCOMPLETE COMBUSTION. DO NOT BREATHE VAPORS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DONT ALLOW MATL TO ENTER SEWERS/WATER
    COURSES.ABSORB W/APPROPRIATE INERT MATL SUCH AS SAND,CLAY,ETC.LARGE
    SPILLS MAY BE PICKED UP USING VACUUM PUMPS,SHOVELS,BUCKETS OR OTHER
    MEANS & PLACED IN DRUM OR  SUITABLE CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN CLOSED CLEARLY LABELED
    CONTAINERS.STORE IN COOL DRY ATMOSPHER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:LOCAL VENTILATION IS ADEQUATE.
Ventilation:LOCAL EXHAUST.
Protective Gloves:FOR SENS SKIN & REP/PROL EXPO.
Eye Protection:USED WHERE SPLASHING MAY OCCUR.
Other Protective Equipment:DO NOT ALLOW GREASE TO SPILL & STAIN
    CLOTHES.
Work Hygienic Practices:WASH HANDS AFTER USE & BEFORE EATING OR RUBBING
    EYES,ETC.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:NP
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:NP
Vapor Density:NP
Spec Gravity:NA
pH:NP
Viscosity:NP
Evaporation Rate & Reference:NA
Solubility in Water:NO
Appearance and Odor:BLACK GREASE, SWEET ODOR; DROPPING PT:>500F
Percent Volatiles by Volume:NP
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:MAY REACT W/STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CO AND CO2 MAY BE PRESENT DUE TO
    INCOMPLETE COMBUSTION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ALL DISPOSAL MUST COMPLY W/LOCAL, STATE AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***