=====================  Product Identification  =====================

MSDS NAME:STAINLESS STEEL PUDDY, (ST) HARDENER.
NIIN:00-268-7934
Kit Part:Y
MSDS Number: CFMYX
=== Responsible Party ===
Company:ITW DEVCON
Address:30 ENDICOTT STREET
City:CANVERS
State:MA
ZIP:01923
Country:US
Info Phone Num:800-424-9300 (CHEMTREC)
Emergency Phone Num:508-777-1100
CAGE:0RZG3
=== Contractor Identification ===
Company:ITW DEVCON
Address:30 ENDICOTT ST
City:DANVERS
State:MA
ZIP:01923-3712
Country:US
Phone:978-777-1100
CAGE:0RZG3
Company:R. S. HUGHES CO.
Address:6530 5TH PL S
Box:81084
City:SEATTLE
State:WA
ZIP:98108
Country:US
Phone:206-767-4463
CAGE:9H439

=============  Composition/Information on Ingredients  =============

Name:TRIETHYLENE TETRAMINE
CAS:112-24-3
RTECS #:YE6650000
Fraction by Wt: 40-60.0%
Other REC Limits:NONE RECOMMENDED

Name:POLYAMIDE OF C18 FATTY ACID DIMERS & TETA
CAS:68410-23-1
Fraction by Wt: 50-70.0%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50 2460 MG/KG, 820 DERMAL.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRITATION, BURN. SKIN:
    IRRITATION, BURN. INHAL: IRRITATION, NAUSEA, VOMIT. INGEST: BURN,
    GI IRRITATION & ULCERATION. CHRONIC: SKIN: SENSITIZATION, ITCHING,
    RASH, SWELLING. INHAL: SENSITIZATION,  ASTHMA-LIKE RESPIRATORY
    REACTION, LIVER/KIDNEY EFFECTS.
Medical Cond Aggravated by Exposure:ASTHMA, BRONCHITIS & SKIN
    IRRITATION.

=======================  First Aid Measures  =======================

First Aid:EYE: IMMED FLUSH W/CLEAN WATER >15 MINUTES, LIFT LIDS, GET
    IMMED MED AID. SKIN: IMMED REMOVE CONTAM CLOTHES/SHOES, WASH BEFORE
    REUSE. WASH WELL W/SOAP & WARM WATER, CALL DR. INHAL: GET FRESH
    AIR. GIVE  OXYGEN OR ARTIFICIAL RESPIRATION IF NEEDED, CALL DR.
    INGEST: DONT INDUCE VOMIT. DILUTE W/LOTS OF MILK/WATER, GET IMMED
    MED AID.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>200F,>93C
Lower Limits:NE
Upper Limits:NE
Extinguishing Media:WATER, CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE SCBA & SUFFICIENT PROTECTIVE GEAR TO
    PREVENT ALL SKIN/EYE CONTACT.
Unusual Fire/Explosion Hazard:DECOMPOSITION PRODUCES HAZARDOUS FUMES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PREVENT SKIN/EYE CONTACT. REMOVE CONTAM
    CLOTHES/SHOES. ABSORB. SCRAPE UP & TRANSFER TO IMPERVIOUS
    CONTAINER. SCRUB AREA W/STRONG DETERGENT & WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY AREA IN CLSD CNTNR.
    KEEP HANDS AWAY FROM EYE WHILE HANDLING. REMOVE CONTAM CLOTHES,
    WASH BEFORE REUSE. DISCARD CONTAM LEATHER GOODS
Other Precautions:IF SANDED/MACHINED AFTER CURING, A TLV OF 10 MG/M3
    SHOULD BE OBSERVED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR RESPIRATOR.
Ventilation:MECHANICAL (GENERAL) IS ADEQUATE. LOCAL EXHAUST
    RECOMMENDED.
Protective Gloves:CHEMICAL RESISTANT, RUBBER.
Eye Protection:SAFETY GLASES W/SIDE SHIELDS.
Other Protective Equipment:AS NEEDED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>450F,>232C
Melt/Freeze Pt:M.P/F.P Text:NE
Vapor Pres:<0.01
Vapor Density:>1.0
Spec Gravity:0.98
pH:10-11
Evaporation Rate & Reference:<1.0
Solubility in Water:30-60.0%
Appearance and Odor:WHITE PASTE W/MILD AMMONIA-LIKE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, CHLORINATED ORGANIC COMPOUNDS.
Stability Condition to Avoid:EXTREME HEAT/OPEN FLAME.
Hazardous Decomposition Products:ACRID & TOXIC FUMES W/ORGANIC AMINES,
    AMMONIA, OXIDES OF CARBON & NITROGEN.
Conditions to Avoid Polymerization:MIXING W/EPOXY RESINS IN LARGE
    QUANITIES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:KEEP OUT OF PUBLIC WATER SUPPLY. INCINERATE IN
    APPROVED FACILITY WHERE PERMITTED BY STATE/LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***