=====================  Product Identification  =====================

MSDS NAME:5 MINUTE EPOXY HARDENER PART NO. 14210
NIIN:00-264-6816
MSDS Number: CFMYW
=== Responsible Party ===
Company:I T W DEVCON INDUSTRIAL CORP
Address:30 ENDICOTT ST
City:DANVERS
State:MA
ZIP:01923-3753
Country:US
Info Phone Num:508-777-1100
Emergency Phone Num:508-777-1100
CAGE:JO305
=== Contractor Identification ===
Company:DEVCON CORP
Address:30 ENDICOTT ST
Box:City:DANVERS
State:MA
ZIP:01923-3753
Country:US
Phone:1-508-777-1100
CAGE:16059
Company:I T W DEVCON INDUSTRIAL CORP
Address:30 ENDICOTT ST
Box:City:DANVERS
State:MA
ZIP:01923
Country:US
Phone:508-777-1100
CAGE:JO305

=============  Composition/Information on Ingredients  =============

Name:2,4,6-TRIS(DIMETHYLAMINO METHYL) PHENOL (ORAL LD50 1200
    MG/KG RAT, DERMAL 1350 MG/KG RABBIT, INHAL LC50 >0.5 MG/L/RAT).
CAS:90-72-2
RTECS #:SN3500000
Fraction by Wt: 10-20%
Other REC Limits:NONE RECOMMENDED

Name:MERCAPTAIN AMINE BLEND
Fraction by Wt: 80-90%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION, SENSITIZATION. EYES:
    IRRITATION, PERMANENT DAMAGE, BLINDNESS. INHAL: IRRITATION, DELAYED
    LUNG INJURY, CHEMICAL PNEUMONIA. INGEST: FATIGUE, MUSCLE WEAKNESS,
    GI IRRITATION, NAUSEA, VOM IT, DIARRHEA.
Medical Cond Aggravated by Exposure:SKIN, EYE & LUNG DISORDERS.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH W/CLEAN WATER FOR >15 MINUTES, LIFT LIDS. GET
    IMMED MED AID. SKIN: REMOVE CONTAM CLOTHES/SHOES. WASH THOROUGHLY
    W/SOAP & WARM WATER, CALL DR. INHAL: REMOVE TO FRESH AIR. GIVE
    OXYGEN IF BREA THING IS DIFFICULT, CALL DR. INGEST: DONT INDUCE
    VOMIT. GIVE LARGE AMOUNTS OF WATER FOLLOWED BY MILK IF AVAILABLE.
    CALL DR.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>200F,>93C
Lower Limits:NE
Upper Limits:NE
Extinguishing Media:WATER, CO2, DRY CHEMICAL & FOAM.
Fire Fighting Procedures:USE SCBA & PROTECTIVE CLOTHING IN CONFINED
    AREAS. COOL CONTAINERS W/WATER SPRAY.
Unusual Fire/Explosion Hazard:TOXIC SMOKE & VAPORS MAY FORM DURING
    COMBUSTION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE IGNITS. VENT AREA. DIKE. ABSORB.
    PUMP TO CONTAINER. FLUSH RESIDUE W/WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:LAUNDER CONTAM CLOTHES/GEAR BEFORE
    REUSE. DISCARD CONTAM LEATHER GOODS. HANDLE ACCORDING TO OF
    POTENTIAL HAZARD OF CURING AGENT.
Other Precautions:PROTECT AGAINST NUISANCE DUST DURING
    SANDING/GRINDING. STORE IN COOL, DRY AREA AWAY FROM IGNITS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR RESPIRATOR.
Ventilation:MECHANICAL (GENERAL): ADEQUATE. LOCAL EXHAUST: RECOMMENDED.
Protective Gloves:CHEMICAL RESISTANT, RUBBER.
Eye Protection:SAFETY GLASES W/SIDE SHIELD.
Other Protective Equipment:EMERGENCY SHOWER, EYEWASH STATION & CHEMICAL
    RESISTANT GEAR.
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:NE
Melt/Freeze Pt:M.P/F.P Text:NE
Vapor Pres:<1.0
Vapor Density:NE
Spec Gravity:1.13
pH:9.5
Evaporation Rate & Reference:NE
Solubility in Water:NEGLIGIBLE.
Percent Volatiles by Volume:0.0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:OPEN FLAME, EXTREME HEAT.
Hazardous Decomposition Products:OXIDES OF CARBON, SULPHUR & NITROGEN.
Conditions to Avoid Polymerization:MIXING W/MORE THAN 1 OUNCE OF EPOXY
    RESINS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:IN ACCORDANCE W/FEDERAL/STATE/LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***