=====================  Product Identification  =====================

MSDS NAME:PHILLYBOND BLUE 6A HARDENER
NIIN:00-227-1698
Kit Part:Y
MSDS Number: CFMYK
=== Responsible Party ===
Company:PHILADELPHIA RESINS CORP
Address:130 COMMERCE DR
Box:454
City:MONTGOMERYVILLE
State:PA
ZIP:18936
Country:US
CAGE:20420
=== Contractor Identification ===
Company:ITW PHILADELPHIA RESINS
Address:130 COMMERCE DR
Box:City:MONTGOMERYVILLE
State:PA
ZIP:18936
Country:US
Phone:215-855-8450
CAGE:20420

=============  Composition/Information on Ingredients  =============

Name:POLYAMIDOAMIDE
Fraction by Wt: 10-25.0%
Other REC Limits:NONE RECOMMENDED

Name:(AMIDOAMINE) TRADESECRET #06-027
Fraction by Wt: 10-30.0%
Other REC Limits:NONE RECOMMENDED

Name:ALIPHATIC AMINE TRADESECRET #06-027
Fraction by Wt: 1-5.0%
Other REC Limits:NONE RECOMMENDED

Name:TETRAETHYLENEPENTAMINE
CAS:112-57-2
RTECS #:KH8585000
Fraction by Wt: <3.0%
Other REC Limits:NONE RECOMMENDED

Name:FORMALDEHYDE POLYMER W/PHENOL & TETA (SARA 302/313)
    (CERCLA)
CAS:50-00-0
RTECS #:LP8925000
Fraction by Wt: 1-3.0%
Other REC Limits:NONE RECOMMENDED
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50 MG/KG RAT DERMAL >20000
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRITATION. SKIN: IRRITATION.
    INGEST: LOW ORAL TOXICITY.
Medical Cond Aggravated by Exposure:SKIN & EYE ALLERGIES.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH W/CLEAN WATER FOR >30 MINUTES, LIFT LIDS, GET
    IMMED MED AID. SKIN: IMMED REMOVE CONTAM CLOTHES, WASH W/PLENTY OF
    SOAP & WATER, GET IMMED MED AID. INHAL: REMOVE TO FRESH AIR. GIVE
    OXYGEN IF  BREATHING IS DIFFICULT, GET MED AID. INGEST: DONT INDUCE
    VOMIT, GIVE WATER/MILK TO DILUTE IMMED CALL DR.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>200F,>93C
Lower Limits:NE
Upper Limits:NE
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE SCBA IN CONFINED AREAS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE WHEN
    EXPOSED TO HIGH HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID PERSONAL CONTACT. SCRAPE UP.
    CONTAINERIZE. REMOVE RESIDUE W/SAFETY SOLVENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY PLACE W/ADEQUATE
    VENT. KEEP AWAY FROM OPEN FLAME/HIGH TEMPERATURE.
Other Precautions:HANDLE IN ACCORDANCE W/HAZARD POTENTIAL OF CURING
    AGENT. TAKE PRECAUTIONS AGAINST OVEREXPOSURE TO DUST FROM
    SANDING/MACHINING, (TLV 2MG/M3).

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATORS MAY BE REQUIRED IN
    CONFINED AREAS. DUST MASKS SHOULD BE WORN DURING GRINDING OR
    MACHINING PROCEDURES.
Ventilation:GENERAL MECHANICAL VENT ADEQUATE.
Protective Gloves:CHEMICAL RESISTANT, RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:CLEAN LONG SLEEVE & LEG CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. PRACTICE GOOD
    HOUSEKEEPING PROCEDURES TO AVOID ALL SKIN CONTACT & BREATHING OF
    VAPORS.
Supplemental Safety and Health
NK

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:NOT EST.
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:NOT EST.
Vapor Density:NOT EST.
Spec Gravity:1.48
pH:NE
Evaporation Rate & Reference:NONVOLATILE
Solubility in Water:APPRECIABLE.
Appearance and Odor:TAN PASTE, W/SLIGHT AMMONIACAL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT/SPARKS/OPEN FLAMES.
Hazardous Decomposition Products:CO2, CO, ALDEHYDES, & ACIDS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:IN ACCORDANCE W/FEDERAL/STATE/LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***