===================== Product Identification =====================
MSDS NAME:TEMP-ALARM 35B
NIIN:00F015316
MSDS Number: CGHHL
=== Responsible Party ===
Company:BIG THREE INDUSTRIES INC TEMPIL DIV
Address:2901 HAMILTON BLVD
City:SOUTH PLAINFIELD
State:NJ
ZIP:07080-2519
Country:US
Info Phone Num:908-757-8300
Emergency Phone Num:908-757-8300
CAGE:82682
=== Contractor Identification ===
Company:BIG THREE INDUSTRIES INC, TEMPIL DIV
Address:2901 HAMILTON BLVD
Box:City:SOUTH PLAINFIELD
State:NJ
ZIP:07080-2519
Country:US
Phone:908-757-8300
CAGE:82682
============= Composition/Information on Ingredients =============
Name:TOLUENE,TOLUOL (IARC CARC- GROUP 3) *98-1*
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 60-65%
Other REC Limits:375 MG/CUM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:LEAD (ANIMAL CARCINOGEN BY ACGIH, IARC - GROUP 2B) *98-1*
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 5-10%
ACGIH TLV:0.15 MG/CUM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:CHROMIUM, CHROMIUM METAL, CHROME (CARCINOGEN BY NTP; IARC
GROUP 3) *98-1*
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 1-5%
ACGIH TLV:0.5 MG/CUM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM
SILICATE (IARC - GROUP 3) *98-1*
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 15-20%
OSHA PEL:2 MG/CUM (RESP DUST)
ACGIH TLV:2 MG/CUM (RESP DUST)
Name:NON-HAZARDOUS INGREDIENTS
Fraction by Wt: 1-19%
Name:VOLATILE ORGANIC CONTENT: 8.4 LBS/GAL; 1015 GM/L
RTECS #:9999999VO
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MAY CAUSE IRRITATION OF
NOSE & THROAT & NERVOUS SYSTEM DEPRESSION. SKIN: BURNING.
REPEATED/PROLONGED OVEREXPOSURE TO SOLVENTS MAY CAUSE PERMANENT
BRAIN & NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, DRYING OF SKIN, REDNESS, BURNING,
DROWSINESS, DIZZINESS, LOSS OF COORDINATION, FATIGUE, CRACKING OF
SKIN
======================= First Aid Measures =======================
Eyes: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:45F
Lower Limits:1
Upper Limits:7
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, HALON
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS FOR
PROTECTION AGAINST TOXIC COMBUSTION/DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:AVOID ALL POSSIBLE SOURCES OF IGNITION.
CLOSED CONTAINERS MAY EXPLODE IN HEAT OF FIRE.
================== Accidental Release Measures ==================
Spill Release Procedures:USE ABSORBENT MATERIAL TO SOAK UP LEAK. DON'T
FLUSH AREA W/WATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINERS CLOSED TIGHTLY. STORE
IN COOL, DRY AREA. USE & STORE IN AREA W/ADEQUATE VENTILATION.
Other Precautions:AVOID CONTACT W/EYES, SKIN & CLOTHING.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH APPROVED RESPIRATOR WHEN
CONCENTRATIONS EXCEED EXPOSURE LIMITS.
Ventilation:LOCAL EXHAUST, MECHANICAL (GENERAL): IF VENTILATION IS NOT
SUFFICIENT.
Protective Gloves:IMPERMEABLE
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:SPLASH APRON
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING & FOLLOW GOOD
HYGIENE & GOOD HOUSEKEEPING PRACTICES.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:231F
Vapor Pres:24
Vapor Density:3.2
Spec Gravity:0.871
Evaporation Rate & Reference:(N-BUTYL ACETATE=1): 1.9
Solubility in Water:SLIGHT
Appearance and Odor:RED PAINT W/CHARACTERISTIC ODOR
Percent Volatiles by Volume:60-65
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
REACTIVE METALS
Stability Condition to Avoid:HEAT & OTHER SOURCES OF IGNITION
Hazardous Decomposition Products:TOXIC COMPOUNDS
Conditions to Avoid Polymerization:IF HEATED TO DECOMPOSITION, MAY EMIT
TOXIC COMPOUNDS.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS. FLAMMABLE LIQUID UN1263.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|