===================== Product Identification =====================
MSDS NAME:75-40 NEY UNDERCUT WAX
NIIN:00F054572
MSDS Number: CGHJY
=== Responsible Party ===
Company:AMERICAN DENTAL SUPPLY INC
Address:2600 WILLIAM PENN HWY
City:EASTON
State:PA
ZIP:18045-5277
Country:US
Info Phone Num:610-252-1464
Emergency Phone Num:610-252-1464
Preparer's Name:LD HOCHHAUSER
CAGE:2W369
=== Contractor Identification ===
Company:AMERICAN DENTAL SUPPLY INC.
Address:2600 WILLIAM PENN HWY
Box:City:EASTON
State:PA
ZIP:18042
Country:US
Phone:610-252-1464
CAGE:2W369
============= Composition/Information on Ingredients =============
Name:HIGH FUSING POLYMERS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: SLIGHTLY IRRITATING. MOLTEN WAX
CAN CAUSE BURNS. EYES: IRRITATION. INHALATION: MAY CAUSE MILD
IRRITATION TO RESPIRATORY TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, BURNS.
======================= First Aid Measures =======================
First Aid:SKIN: RINSE W/COOL WATER & TREAT FOR ANY THERMAL BURNS. EYES:
FLUSH W/LARGE AMOUNTS OF WATER. INHALATION: REMOVE TO FRESH AIR.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:>400F
Extinguishing Media:DRY CHEMICAL, FOAM/CO2.
Fire Fighting Procedures:AVOID SKIN CONTACT. WATER SPRAY MAY BE
INEFFECTIVE/SPREAD MELTED BURNING WAX. MOLTEN WAX WILL CAUSE
THERMAL BURNS UNLESS COOLED PROMPTLY.
Unusual Fire/Explosion Hazard:NON-FLAMMABLE. INGREDIENTS WILL BURN ONLY
WHEN HEATED STRONGLY. IF HEATED TO DECOMPOSITION, COULD GENERATE
IRRITATING FUMES/SMOKE.
================== Accidental Release Measures ==================
Spill Release Procedures:CAN BE SWEPT UP & DISPOSED OF IN ANY
APPROPRIATE TRASH.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINERS WELL CLOSED. STORE IN
COOL DRY WELL VENTILATED AREA. AVOID HEAT & DIRECT SUNLIGHT. FOR
LABORATORY/OFFICE USE ONLY.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE NEEDED IN NORMAL USE.
Ventilation:LOCAL EXHAUST: NOT NECESSARY IN NORMAL USE. MECHANICAL
(GENERAL): IS ACCEPTABLE.
Protective Gloves:NOT REQUIRED
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:EYE WASH STATION.
Work Hygienic Practices:NORMAL PRECAUTIONS OF LABORATORY GOOD
HOUSEKEEPING PRACTICES SHOULD BE FOLLOWED.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Melt/Freeze Pt:M.P/F.P Text:240F
Spec Gravity:<1
Solubility in Water:INSOLUBLE
Appearance and Odor:ORANGE-RED WAXY SOLID W/VERY SLIGHT WAXY ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME HEAT.
Hazardous Decomposition Products:THERMAL: CO & IRRITATING FUMES.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. LAB AMOUNTS CAN ENTER REGULAR TRASH.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD ***