=====================  Product Identification  =====================

MSDS NAME:CHAIN  & BAR LUBRICANT OIL
NIIN:01-066-3722
Status Code:A
MSDS Number: CJDQH
=== Responsible Party ===
Company:SPECIALTY (WESTLAND) OIL COMPANY
Address:2740 VALLEYVIEW DR
Box:8098
City:SHREVEPORT
State:LA
ZIP:71148
Country:US
Info Phone Num:757-486-9251
Emergency Phone Num:318-687-8000
Preparer's Name:DENA HARLEES
CAGE:0A6L6
=== Contractor Identification ===
Company:SPECIALTY (WESTLAND) OIL COMPANY
Address:2740 VALLEYVIEW DR
Box:City:SHREVEPORT
State:LA
ZIP:71148
Country:US
Phone:318-687-8000
CAGE:0A6L6
Company:STIHL INC
Address:536 VIKING DR
Box:City:VIRGINIA BEACH
State:VA
ZIP:23452
Country:US
Phone:757-486-9113
Contract Num:SP0 490 99 M W073
CAGE:9Z575

=============  Composition/Information on Ingredients  =============

Name:HYDROTREATED HEAVY NAPHTHENIC DISTILLATE
    (PETROLEUM)/LUBRICATING OIL BASE STOCKS
CAS:64742-52-5
RTECS #:PY8035000
Minumum % Wt:0.
Maxumum % Wt:95.
Other REC Limits:NONE RECOMMENDED
OSHA PEL:5 MG/M3 (OIL MIST)
ACGIH TLV:5 MG/M3 (OIL MIST)

Name:DISTILLATES (PETROLEUM), HYDROTREATED LIGHT
    NAPHTHENIC/LUBRICATING OIL BASE STOCKS
CAS:64742-53-6
RTECS #:PY8036000
Minumum % Wt:0.
Maxumum % Wt:95.
Other REC Limits:NONE RECOMMENDED
OSHA PEL:5 MG/M3 (OIL MIST)
ACGIH TLV:5 MG/M3 (OIL MIST)

Name:ADDITIVE PACKAGE
< Wt:5.

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50 (ORAL, RAT) > 5,000 MG/KG
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:TARGET ORGANS: EYES, SKIN. ACUTE- EYE
    CONTACT: MAY CAUSE IRRITATION. SKIN CONTACT: PROLONGED OR REPEATED
    CONTACT WITH THIS PRODUCT TENDS TO REMOVE SKIN OILS POSSIBLY
    LEADING TO IRRITATION AND DERMATIT IS. HOWEVER, BASED ON HUMAN
    EXPERIENCE AND AVAILABLE TOXICOLOGICAL DATA, THIS PRODUCT IS JUDGED
    TO BE NEITHER A "CORROSIVE" NOR AN "IRRITANT" BY OSHA CRITERIA.
    INHALATION: MISTS MAY CAUSE  RESPIRATORY  TRACT IRRITATION.
    INGESTION: PRODUCT HAS LOW ORDER OF ACUTE ORAL AND DERMAL TOXICITY,
    BUT MINUTE AMOUNTS ASPIRATED INTO LUNGS DURING INGESTION OR
    VOMITING MAY CAUSE MILD TO SEVERE PULMONARY INJURY AN D POSSIBLE
    DEATH. CHRONIC - UNKNOWN.
Explanation of Carcinogenicity:USED MOTOR OILS HAVE BEEN SHOWN TO CAUSE
    SKIN CANCER IN MICE FOLLOWING REPEATED APPLICATION AND CONTINUOUS
    EXPOSURE.
Effects of Overexposure:IRRITATION, COUGH, TEARING, NAUSEA
Medical Cond Aggravated by Exposure:NONE RECOGNIZED.

=======================  First Aid Measures  =======================

First Aid:GET MEDICAL HELP IF SYMPTOMS PERSIST. INHALATION: VAPOR
    PRESSURE IS VERY LOW. VAPOR INHALATION UNDER AMBIENT CONDITIONS IS
    NORMALLY NOT A PROBLEM. IF OVERCOME BY VAPOR FROM HOT PRODUCT OR
    MISTS, IMMED IATELY REMOVE TO FRESH AIR. GIVE ARTIFICAL RESPIRATION
    IF NOT BREATHING. IF BREATHING IS DIFFICULT, OXYGEN MAY BE GIVEN BY
    QUALIFIED PERSONNEL. EYE CONTACT: IMMEDIATELY FLUSH WITH WATER FOR
    AT LEAST 1 5 MINUTES. HOLD EYELIDS OPEN. SKIN: REMOVE CONTAMINATED
    CLOTHING. WASH SKIN WITH SOAP & WATER. ORAL: DO NOT INDUCE
    VOMITING. SEEK MEDICAL ATTENTION IMMEDIATELY. IF VOMITING OCCURS,
    KEEP HEAD BELOW HIP S.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>229.4C, 445.F
MINIMUM
Autoignition Temp:>315.6C, 600.F
Lower Limits:0.9%
Upper Limits:7%
Extinguishing Media:USE WATER SPRAY  OR FOAM, DRY CHEMICAL, FOAM OR
    CARBON DIOXIDE
Fire Fighting Procedures:WATER OR FOAM MAY CAUSE FROTHING. USE WATER TO
    KEEP FIRE EXPOSED CONTAINERS COOL.	WATER SPRAY MAY BE USED TO
    FLUSH SPILLS AWAYFROM EXPOSURES. WEAR SUPPLIED-AIR BREATHING
    EQUIPMENT FOR ENCLOSED OR CON FINED SPACES.
Unusual Fire/Explosion Hazard:TOXIC GASES MAY BE FORMED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT. PROVIDE ADEQUATE
    VENTILATION. RECOVER FREE OIL. REMOVE SPILL WITH INERT ABORBENT
    SUCH AS SAND, CLAY, EARTH. TRANSFER TO PROPER CONTAINERS FOR
    DISPOSAL. PREVENT RUN-OFF TO EN TER SEWERS OR WATERWAYS. REPORT
    SPILLS AS REQUIRED TO AUTHORITIES. ASSURE CONFORMITY WITH
    APPLICABLE GOVERNMENTAL REGULATIONS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AT ROOM TEMPERATURE AWAY FROM
    INCOMPATIBLES.
Other Precautions:EMPTY CONTAINERS RETAIN PRODUCT RESIDUES (VAPORS,
    LIQUID, AND/OR SOLID) AND CAN BE DANGEROUS. DO NOT PRESSURIZE, CUT,
    WELD, BRAZE, SOLDER OR DRILL. KEEP OUT OF REACH OF CHILDREN. AVOID
    BREATHING VAPOR S OR MISTS. DO NOT GET IN EYE, ON SKIN OR ON
    CLOTHING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE SHOULD BE NEEDED. A NIOSH-APPROVED
    AIR-SUPPLIED RESPIRATOR SHOULD BE WORN IN CONFINED SPACES, IF
    NEEDED.
Ventilation:GENERAL MECHANICAL VENTILATION IS ADEQUATE FOR NORMAL USE.
    LOCAL EXHAUST IS RECOMMENDED FOR CONFINED AREAS.
Protective Gloves:RUBBER IF NEEDED
Eye Protection:CHEMICAL SAFETY GLASSES OR GOGGLES WHEN CONTACT MAY
    OCCUR
Other Protective Equipment:EYE BATH, WASHING FACILITY, LAB COAT OR
    UNIFORM.
Work Hygienic Practices:OBSERVE GOOD INDUSTRIAL HYGIENE PRACTICES AND
    RECOMMENDED PROCEDURES. WASH AFTER HANDLING AND BEFORE EATING,
    DRINKING OR SMOKING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V5
Boiling Pt:B.P. Text:N/D
Melt/Freeze Pt:=-17.8C, 0.F
M.P/F.P Text:POUR POINT  ASTM D97
Vapor Pres:<.01MM HG@20C
Vapor Density:>5(AIR=1)
Spec Gravity:0.9200
Viscosity:151 CST @40C
Evaporation Rate & Reference:(N-BUTYL ACETATE=1) <.01
Solubility in Water:<0.1%
Appearance and Odor:CLEAR AND BRIGHT,MILD BLAND PETROLEUM OIL
Percent Volatiles by Volume:NEGLIGIBLE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS SUCH AS LIQUID CHLORINE, CONCENTRATED OXYGEN,
    SODIUM HYPOCHLORITE OR CALCIUM HYPOCHLORITE
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:FUMES, SMOKE, CARBON MONOXIDE, CARBON
    DIOXIDE, SULFUR OXIDES AND OTHER DECOMPOSITION PRODUCTS MAY BE
    FORMED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS. DISPOSE OF IN AN APPROVED INCINERATOR OR
    CONTRACT WITH A LICENSED WASTE DISPOSAL SERVICE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***