=====================  Product Identification  =====================

MSDS NAME:ROYCO 602
NIIN:01-419-0891
Status Code:A
MSDS Number: CJDRD
=== Responsible Party ===
Company:ROYAL LUBRICANTS COMPANY INC.
Box:518
City:E. HANOVER
State:NJ
ZIP:07936
Country:US
Emergency Phone Num:201-887-7411
Resp. Party Other MSDS Num.:740,078-4
Chemtrec Ind/Phone:(800)424-9300
CAGE:07950
=== Contractor Identification ===
Company:ROYAL LUBRICANTS COMPANY INC.
Address:215 MERRY LN
Box:518
City:EAST HANOVER
State:NJ
ZIP:07936
Country:US
Phone:973-887-7411/7410
CAGE:07950

=============  Composition/Information on Ingredients  =============

Name:1-DECENE, DIMER, HYDROGENATED; (POLYALPHAOLEFIN)
CAS:68649-11-6
> Wt:98.

Name:MINOR ADDITIVE; (ACUTE ORAL LD50: 24,000 MG/KG (RAT))
< Wt:2.

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:  EYE CONTACT: LUBRICATING BASE
    OILS ARE GENERALLY CONSIDERED NO MORE THAN MINIMALLY IRRITATING TO 
    EYES. SKIN CONTACT: LUBRICATING BASE OILS ARE GENERALLY CONSIDERED
    NO MORE THAN MILDLY IRRITAT ING TO	SKIN. PRLNGD/ RPTD LIQ CONTACT
    CAN RESULT IN DEFATTING & DRYING OF  SKIN WHICH MAY RESULT IN SKIN
    IRRITATION AND DERMATITIS.	RELEASE DURING HIGH PRESSURE USAGE MAY
    RESULT IN INJECTION OF OIL	ONTO  SKIN CAUSING LOCAL NECROSIS.
    INHAL: SUBSTANCE IS MOD TOX TO INTERNAL ORGANS IF INHALED. INHAL OF
    VAP (GENERATED AT HIGH TEMP ONLY) OR OIL MIST MAY CAUSE MILD IRRIT
    OF MUC MEMB OF UPPER RESP TRAC T. (EFTS OF OVEREXP)
Effects of Overexposure:HLTH HAZ: INGESTION: THIS MATERIAL MAY BE
    HARMFUL OR FATAL IF SWALLOWED. INGESTION MAY RESULT IN VOMITING:
    ASPIRATION (BREATHING) OF VOMITUS INTO THE LUNGS MUCT BE AVOIDED AS
    EVEN SMALL QUANTITIES MAY  RESULT IN ASPIRATION PNEUMONITIS. SIGNS
    & SYMPTOMS: IRRITATION AS NOTED ABOVE. ASPRATION PNEUMONITIS MAY BE
    EVIDENCE BY COUGHING, LABORED BREATHING AND CYANOSIS (BLUISH SKIN):
    IN SEVERE CASES DEATH M AY OCCUR. LOCAL NECROSIS IS EVIDENCED BY
    DELAYED ONSET OF PAIN AND TISSUE DAMAGE A FEW HOURS FOLLOWING
    INJECTION.
Medical Cond Aggravated by Exposure:PREEXISTING EYE, SKIN, AND
    RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS
    PRODUCT.

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT: FLUSH  W/H*2O FOR AT LEAST 15 MIN. IF IRRITATION
    OCCURS, GET MED ATTN. SKIN CONTACT: REMOVE CONTAMD CLTHG/SHOES &
    WIPE EXCESS FROM SKIN. FLUSH SKIN W/H*2O. FOLLOW BY WASHING W/SOAP
    & H*2O . IF IRRIT OCCURS, GET MED ATTN. DO NOT REUSE CLTHG UNTIL
    CLEANED. IF MATL IS INJECTED UNDER SKIN, GET MED ATTN PROMPTLY TO
    PVNT SERIOUS INJURY. INHAL: REMOVE VICTIM TO FRESH AIR & PROVIDE
    OXYGEN IF B REATHING IS DIFFICULT. GET MED ATTN. INGEST: DO NOT
    INDUCE VOMIT. IF VOMIT OCCURS SPONTANEOUSLY, KEEP HEAD BELOW HIPS
    TO PVNT ASPIR OF LIQ INTO LUNGS. GET MED ATTN. NOTE TO MD. IF MORE
    THAN 2.0 ML PER  KG HAS BEEN INGESTED & (SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:=176.7C, 350.F
Lower Limits:N/AV
Upper Limits:N/AV
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL OR CO*2. DO NOT
    USE A DIRECT STREAM OF WATER. PRODUCT WILL FLOAT AND CAN BE
    REIGNITED ON SURFACE OF WATER.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . MATERIAL WILL NOT BURN UNLESS PREHEATED. COOL FIRE
    EXPOSED CONTAINERS WITH WATER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:MAY BURN ALTHOUGH NOT READILY IGNITABLE. USE
    CAUTIOUS JUDGMENT WHEN CLEANING UP LRG SPILLS. LRG SPILLS: WEAR
    RESP & PROT CLTHG AS APPROP. SHUT OFF SOURCE OF LEAK IF SAFE TO DO
    SO. DIKE & CNTN. REMOVE  W/VACUUM TRUCKS/ PUMP TO STOR/SALVAGE
    VESSELS. SOAK UP RESIDUE W/AN ABSORB SUCH AS CLAY, SAND/ OTHER
    SUITABLE MATL; DISPOSE OF PROPERLY. FLUSH AREA W/H*2O TO REMOVE
    TRACE RESIDUE. (OTHER INFORMATION)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID BREATHING VAPORS OR MISTS.
    MINIMIZE SKIN AND EYE CONTACT. STORE IN A COOL, DRY PLACE WITH
    ADEQUATE VENTILATION. KEEP AWAY FROM OPEN FLAMES AND HIGH
    TEMPERATURES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE A NIOSH-APPROVED RESPIRATOR AS REQUIRED TO
    PREVENT OVEREXPOSURE. IN ACORD WITH 29 CFR 1910.134, USE EITHER AN
    ATMOSPHERE-SUPPLYING RESPIRATOR OR AN NIOSH APPROVED AIR-PURIFYING
    RESPIRATOR FOR ORGA NIC VAPORS.
Protective Gloves:NITRILE GLOVES
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Work Hygienic Practices:WASH WITH SOAP AND WATER BEFORE EATING,
    DRINKING, SMOKING, APPLYING COSMETICS, OR USING TOILET FACILITIES.
    LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
FIRST AID PROC: VOMITING HAS NOT OCCURRED, EMESIS SHOULD BE INDUCED
    WITH SUPERVISION. KEEP VICTIM'S HEAD BELOW HIPS TO PVNT ASPIR. IF
    SYMPS SUCH AS LOSS OF GAG REFLEX, CONVUL/ UNCONSCIOUSNESS OCCUR BE
    FORE EMESIS, GASTRIC LAVAGE USING A CUFFED ENDOTRACHEAL TUBE SHOULD
    BE CONSIDERED.

==================  Physical/Chemical Properties  ==================

Spec Gravity:0.7990 (H*2O=1)
Viscosity:5.3 (CST @ 100 DEF F)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, NO ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID HEAT, FLAME AND CONTACT WITH STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:THERMAL DECOMP PRODS ARE HIGHLY
    DEPENDENT ON  COMBUSTION CNDTNS. A COMPLEX MIXT OF AIRBORNE SOLID,
    LIQ, PARTICULATES & GASES WILL EVOLVE WHEN THIS MATL UNDERGOES
    PYROYSIS (OTHER INFORMATION)
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PLACE IN AN APPROPRIATE DISPOSAL FACILITY IN
    COMPLIANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS. ENVIRONMENTAL
    HAZARDS: UNDER EPA-CWA. THIS PRODUCT IS CONSIDERED AN OIL UNDER
    SECTION 311. SPILLS INT O OR LEADING TO SURFACE WATERS THAT CAUSE A
    SHEEN MUST BE REPORTED TO THE NATIONAL RESPONSE CENTER, 
    800-424-8802.

===================  MSDS Transport Information  ===================

Transport Information:DEPARTMENT OF TRANSPORTATION CLASSIFICATION: NOT
    REGULATED AS HAZARDOUS BY D.O.T.

=====================  Regulatory Information  =====================

Federal Regulatory Information:THIS PRODUCT IS LISTED ON THE EPA/TSCA
    INVENTORY OF CHEMICAL SUBSTANCES.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***