=====================  Product Identification  =====================

MSDS NAME:CARDABLE FIBER
NIIN:01-418-4722
Status Code:A
MSDS Number: CJDRB
=== Responsible Party ===
Company:OWENS CORNING
Address:ONE OWENS CORNING PARKWAY
City:TOLEDO
State:OH
ZIP:43659
Country:US
Info Phone Num:419-248-8234
Emergency Phone Num:419-248-5330
Chemtrec Ind/Phone:(800)424-9300
CAGE:JO415
=== Contractor Identification ===
Company:EUR-PAC CORP.
Address:112 PORTER ST
Box:City:WATERBURY
State:CT
ZIP:06708
Country:US
Phone:203-756-0102 / FAX 0103
CAGE:8B805
Company:OWENS CORNING
Address:ONE OWENS CORNING PARKWAY
Box:City:TOLEDO
State:OH
ZIP:43659
Country:US
Phone:419-248-8234
CAGE:JO415
Company:OWENS-CORNING, WORLD HEADQUARTERS
Address:ONE OWENS CORNING PARKWAY
Box:City:TOLEDO
State:OH
ZIP:43659
Country:US
Phone:419-248-8234
CAGE:45255

=============  Composition/Information on Ingredients  =============

Name:FIBERGLASS (FIBROUS GLASS); (FIBER GLASS CONTINUOUS
    FILAMENT (NON RESPIRABLE))
CAS:65997-17-3
Fraction by Wt: 98-100%
OSHA PEL:5 MG/M3 RESP DUST
ACGIH TLV:10 MG/M3 (<7MICRONS)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:FIBER GLASS CONTINUOUS FILAMENT
    IS A MECHANICAL IRRITANT. BREATHING DUSTS AND FIBERS MAY CAUSE
    SHORT TERM IRRITATION OF THE MOUTH, NOSE AND THROAT. SKIN CONTACT
    WITH DUST AND FIBERS MAY CAUSE IT CHING AND SHORT TERM IRRITATION. 
    EYE CONTACT W/ DUST & FIBERS MAY CAUSE SHORT TERM MECHANICAL
    IRRITATION.  INGESTION MAY CAUSE SHORT TERM MECHANICAL IRRITATION
    OF THE STOMACH & INTESTINES.  CHRONIC:N O KNOWN CHRONIC HEALTH
    EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EYES: IRRITATION.  SKIN: ITCHING & IRRITATION. 
    INHALATION: IRRITTION OF THE MOUTH, NOSE, AND THROAT.  INGESTION:
    IRRITATION OF THE STOMACH AND INTESTINES.
Medical Cond Aggravated by Exposure:LONG TERM BREATHING OR SKIN
    CONDITIONS THAT ARE AGGRAVATED BY MECHANICAL IRRITANTS MAY BE AT A
    HIGHER RISK FOR WORSENING FROM USE OR CONTACT W/THIS PRODUCT.

=======================  First Aid Measures  =======================

First Aid:INHALATION:MOVE PERSON TO FRESH AIR. SEEK MED ATTN IF
    IRRITATION PERSISTS. EYES:FLUSH W/RUNNING WATER FOR AT LEAST 15
    MINS. SEEK MED ATTN IF IRRITATION PERSISTS. SKIN:WASH W/MILD SOAP &
    RUNNING WATER.  USE WASHCLOTH TO HELP REMOVE FIBERS. TO AVOID MORE
    IRRITATION, DO NOT RUB/SCRATCH AFFECTED AREAS. RUBBING/SCRATCHING
    MAY FORCE FIBERS INTO SKIN. SEEK MED ATTN IF IRRIT PERSISTS.
    UNLIKELY. IF IT DOES  OCCUR, WATCH THE PERSON FOR SEVERAL DAYS TO
    MAKE SURE THAT INTESTINAL BLOCKAGE DOES NOT OCCUR.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:WATER, FOAM, CO*2 OR DRY CHEMICAL.
Fire Fighting Procedures:USE USE SELF CONTAINED BREATHING APPARATUS
    (SCBA) AND FULL BUNKER TURNOUT GEAR IN A SUSTAINED FIRE.
Unusual Fire/Explosion Hazard:NONE KNOWN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:LAND SPILL: SCOOP UP MATERIAL AND PUT INTO
    SUITABLE CONTAINER FOR DISPOSAL AS A NON-HAZARDOUS WASTE. WATER
    SPILL: MATERIAL WILL SINK AND DISPERSE ALONG THE BOTTOM OF
    WATERWAYS AND PONDS.  AIR RELEASE:	MATERIAL WILL SETTLE OUT OF THE
    AIR. IT CAN THEN BE SCOOPED UP FOR DISPOSAL AS A NON-HAZARDOUS
    WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NO SPECIAL STORAGE OR HANDLING
    PROCEDURES ARE REQUIRED FOR THIS MATERIAL. HANDLE USING GOOD
    INDUSTRIAL HYGIENE & SAFETY PRACTICES.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:PROPERLY FITTED NIOSH APPRVD DISPOSABLE DUST
    RESP SUCH AS 3M MODEL 8210 (FORMERLY 8710) OR MODEL 9900 (IN HIGH
    HUMIDITY ENVIRONS) OR EQUIV SHOULD BE USED WHEN: HIGH DUST LEVELS
    ARE ENCOUNTERED; LEVEL  OF GLASS FIBERS IN AIR EXCEEDS THE
    OCCUPATIONAL EXPOSURE LIMITS; OR IF IRRITATION OCCURS.
Ventilation:GENERAL DILUTION VENT &/OR LOCAL EXHAUST VENT SHOULD BE
    PROVIDED AS NECESSARY TO MAINTAIN EXPOS BELOW REGULATORY LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES, GOGGLES OR FACE SHIELD.
Other Protective Equipment:LOOSE FITTING LONG SLEEVED SHIRT THT COVERS
    TO THE BASE OF THE NECK, LONG PANTS, AND GLOVES.
Work Hygienic Practices:HANDLE USING GOOD INDUSTRIAL HYGIENE AND SAFETY
    PRACTICES.
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:2.60 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE/OFF-WHITE COLORED SOLID W/ NO ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, AND
    WATER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***