=====================  Product Identification  =====================

MSDS NAME:EEAE001B MIL-C-22750F (HS-611/2.8) C-24533 EPOXY ACTIVATOR
NIIN:01-313-8710
Status Code:A
MSDS Number: CJDWF
=== Responsible Party ===
Company:SPRAYLAT CORP
Address:1701 E 122ND ST
City:CHICAGO
State:IL
ZIP:60633
Country:US
Info Phone Num:773-646-5900
Emergency Phone Num:773-646-5900
Preparer's Name:JIM SCHMIDT
Chemtrec Ind/Phone:(800)424-9300
CAGE:0ULT0
=== Contractor Identification ===
Company:SPRAYLAT CORP
Address:1701 E 122ND ST
Box:City:CHICAGO
State:IL
ZIP:60633
Country:US
Phone:773-646-5900
CAGE:0ULT0

=============  Composition/Information on Ingredients  =============

Name:OXIRANE, MONO.(.(C8-10-ALKYLOXY)METHYL.). DERIVS. ;
    (ALIPHATIC EPOXIDE) VP: 0.10
CAS:68609-96-1
< Wt:10.

Name:METHYL ISOBUTYL KETONE  VP: 16.00  LEL: 1.4%
CAS:108-10-1
RTECS #:SA9275000
< Wt:25.
OSHA PEL:410 MG/M3;100 PPM
ACGIH TLV:205 MG/M3;50 PPM
ACGIH STEL:307 MG/M3;75 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:BISPHENOL A DIGLYCIDYL ETHER-BISPHENOL A COPOLYMER; (EPOXY
    RESIN)  VP: 0.03
CAS:25036-25-3
< Wt:75.

Name:XYLENE  VP: 6.60  LEL: 1.0%
CAS:1330-20-7
RTECS #:ZE2100000
< Wt:25.
OSHA PEL:100 PPM
ACGIH TLV:434 MG/M3;100 PPM
ACGIH STEL:651 MG/M3;150 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:ETHYLBENZENE; (ETHYL BENZENE)  VP: 10.00  LEL: 1.2%
CAS:100-41-4
RTECS #:DA0700000
< Wt:10.
OSHA PEL:435 MG/M3;100 PPM
ACGIH TLV:434 MG/M3;100 PPM
ACGIH STEL:543 MG/M3;125 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:N-BUTANOL  VP: 5.90  LEL: 1.4%
CAS:71-36-3
RTECS #:EO1400000
< Wt:10.
OSHA PEL:300 MG/M3;100 PPM
ACGIH STEL:C152 MG/M3;C50 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO
Health Hazards Acute and Chronic:BASED ON ALIPHATIC EPOXIDE, POSITIVE
    RSLTS WERE OBTAINED IN AMES SALONELLA BACTERIAL/MICROSOME ASSAY.
    BASED ON XYLENE, ASPIR CAN BE HAZ IF THIS MATL IS SWALLOWED.
    CHRONIC OVEREXP OR INGEST OF THIS ATL  AY CAUSE KIDNEY & LIVER
    INJURY. BASED ON METHYL ISOBUTYL KETONE, XYLENE & ETHYL BENZENE,
    PRLNGD OVEREXP OR INGEST MAY CAUSE CNS DEPRESS/DISORDER. BASED ON
    METHYL ISOBUTYL KETONE, PRLNGD OVEREXP MAY C AUSE HDCH, NAUS, LOSS
    OF BALANCE, COORD & CONSCIOUSNESS. RPTD EXCESS EXPOS MAY ALSO CAUSE
    NARCOSIS, COMA & DEATH & CAUSE CHRONIC ADVERSE SYSTEIC EFTS. BASED
    ON ETHYL ISOBUTYL KETONE & XYLENE INGEST OF  THIS MATL MAY PRDCE
    (EFTS OF OVEREXP)
Effects of Overexposure:HLTH HAZS: SENSATION OF HOTNESS W/VOMIT, DIARR
    & NAUS AS SYMPS. BASED ON METHYL ISOBUTYL KETONE, MAY CAUSE LUNG
    INJURY. BASED ON ALIPHATIC EPOXIDE, POTNTL MAY EXIST THAT PROD
    COULD CAUSE GENOTOX EFTS  (MUTAGENICITY). PROD MAY CAUSE NOSE,
    THROAT & UPPER RESP TRACT IRRIT. SPRAY MIST/VAPS OF SPRAY MIST
    PAINTS MAY CAUSE IRRIT TO EYES, NOSE, THROAT, UPPER RESP TRACT, MUC
    MEMBS & SKIN. BASED ON N-BUTANOL  PROD IS PRESUMED TO BE MODERATELY
    TOX. BASED ON ALIPHATIC EPOXIDE & EPOXY RESINTHIS PROD CAN IRRIT &
    DMG ALL BODY TISSUE IT CNTCTS & CAN CAUSE ALLERGIC SENSIT. BASED ON
    ETHYL BENZENE & N-BUTANOL PROD  IS IRRIT TO MUC MEMBS. BASED 
    (SUPDAT)

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH LUKEWARM WATER FOR AT LEAST 15 MINUTES. SEEK
    MD IMMEDIATELY. SKIN: FLUSH WASH WITH COPIOUS AMOUNTS OF LUKEWARM
    WATER. REMOVE CONTAMINATED CLOTHING PROMPTLY. CONTACT MD
    IMMEDIATELY. IN HAL: REMOVE EXPOSED INDIVIDUAL TO FRESHAIR. RESTORE
    BREATHING IF REQUIRED. CONTACT MD IMMEDIATELY. INGEST: RINSE MOUTH
    IMMEDIATELY. GIVE EXPOSED INDIVIDUAL 6 TO 8 OUNCES OF LIQUID.
    (NEVER GIVE ANYTHIN G BY MOUTH TO AN UNCONSCIOUS PERSON). DO NOT
    INDUCE VOMITING UNLESS ADVISED BYMD. CONTACT MD IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point:=15.C, 59.F
Lower Limits:1.0%
Upper Limits:11.2%
Extinguishing Media:USE CARBON DIOXIDE, DRY CHEMS OR ALCOHOL FOAM.
    BASED ON METHYL ISOBUTYL KETONE & XYLENE, WATER SPRAY MAY BE USEFUL
    IN MINIMIZING VAPS & COOLING CNTNRS EXPOSED TO HEAT & (OTHER INFO)
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . CLEAR FIRE AREA OF UNPROTECTED PERSONNEL. FIGHT FIRE
    FROM A SAFE DISTANCE OR A PROTECTED LOCATION. CONTAINERS EXPOSED TO
    INTENSE HEAT FROM  FIRES SHOULD BE COOLED W/WATER TO PREVENT VAPOR
    PRESS BUILDUP WHICH COULD RESULT IN CONTAINER RUPTURE.
Unusual Fire/Explosion Hazard:THIS LIQUID AND VAPORS ARE DANGEROUS FIRE
    HAZARD AND MODERATE EXPLOSION HAZARD WHEN EXPOSED TO HEAT, FLAME OR
    ANY SOURCE OF IGNITION. VAPORS MAY BE HEAVIER THAN AIR AND MAY
    TRAVEL ALONG THE GROUND TO	DISTANT IGNITION SOURCE AND FLASH
    BACK.KEEP WELDING OR CUTTING EQUIPMENT AWAY FROM PRODUCT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:STAY UPWIND & AWAY FROM SPILL UNLESS WEARING
    APPROP PROT EQUIP. STOP &/OR CONTAIN DISCHARGE IF IT MAY BE DONE
    SAFELY. KEEP ALL SOURCES OF IGNIT AWAY. VENT AREA OF SPILL. USE
    NON-SPARKING TOOLS FOR CLE ANUP. COVER W/INERT MATL TO REDUCE
    FUMES. KEEP OUT OF DRAINS, SEWERS OR WATERWAYS. CONTACT FIRE AUTHS.
    NOTIFY LOCAL HEALTH & POLLUTION CONTROL AGENCIES. CALL SPILL
    RESPONSE TEAMS IF LARGE SPILL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP PROD CNTNRS COOL, DRY & AWAY FROM
    SOURCES OF IGNIT. USE & STORE THIS PROD W/ADEQ VENT. DO NOT SMOKE
    IN STORAGE AREAS. KEEP CNTNRS TIGHTLY CLOSED WHEN NOT IN USE.
    ISOLATE FRO HEAT, ELEC EQUIP, SPA RKS & OPEN FLAME. SPRINKLER FIRE
    PROT ISDESIRABLE IN AREAS OF STORAGE, HANDLING & USE.
Other Precautions:PERS SHOULD AVOID INHAL OF VAPS/MIST. PERSONAL CNTCT
    W/PROD SHOULD BE AVOIDED. SHOULD CNTCT BE MADE, REMOVE SATURATED
    CLTHG & FLUSH AFFECTED SKIN AREAS W/WATER. CNTNRS OF THIS MATL MAY
    BE HAZ WHEN EMP TIED. SINCE EMPTIED CNTNRS RETAIN PROD RESIDUES
    (VAP, LIQ &/OR SOLID), (OTHER INFO)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:DO NOT BREATHE SPRAY MIST/VAPS (IF PRESENT) OF
    ANY SPRAY PAINT. WEAR AN APPROP, NIOSH APPRVD, PROPERLY FITTED RESP
    DURING & AFTER APPLICATION UNLESS AIR MONITORING DEMONSTRATES
    VAP/MIST LEVELS ARE BEL OW APPLIC LIMS IF ANY APPEAR IN INGRED
    SECTION. USE A NIOSH APPRVD HALF-MASK RESP W/ORGANIC VAPOR
    CARTRIDGE WHERE EXCESSIVE EXPOS TO VAPS/MIST MAY OCCUR.
Ventilation:USE VENT AS REQD TO CONTROL VAP/DUST/MIST CONC. AVOID
    PRLNGD/RPTD BRTHG OF VAPS. IF EXPOSURE EXCEEDS TLV, USE NIOSH
    APPRVD RESP TO PREVENT OVEREXP.
Protective Gloves:RESISTANT GLOVES SUCH AS NATURAL RUBBER, NEOPRENE,
    BUNA N OR NITRILE.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYE WASH & DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA . AN APRON SHOULD BE WORN TO AVOID SKIN
    CONTACT.
Supplemental Safety and Health
EFTS OF OVEREXP: ON METHYL ISOBUTYL KETONE, XYLENE, ETHYL BENZENE &
    N-BUTANOL, INGEST OF PROD WILL CAUSE IRRIT OF GI TRACT & MAY CAUSE
    EFTS RESEMBLING THOSE FROM INHAL OF VAP. BASED ON METHYL ISOBUTYL 
    KETONE, XYLENE & N-BUTANOL PROD IS SEVERELY IRRIT TO EYES. EXPOS
    MAY CAUSE EXTENSIVE CORNEAL INJURY. (OTHER INFO)

==================  Physical/Chemical Properties  ==================

Boiling Pt:>114.C, 237.1F
Vapor Pres:SEE INGREDIENTS
Vapor Density:HVR/AIR
Spec Gravity:0.99 
VOC Grams/Liter:3.1
Evaporation Rate & Reference:FASTER THAN BUTYL ACETATE
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID; MODERATE KETONE ODOR.
Percent Volatiles by Volume:44.90

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
BASED ON METHYL ISOBUTYL KETONE & ETHYL BENZENE PROD IS INCOMPAT
    W/STRONG OXIDIZERS; MAY CAUSE FIRE OR EXPLO ON CNTCT. BASED ON
    EPOXY RESIN & XYLENE THIS MATL IS INCOMPAT W/STRONG ACIDS & BASES,
    OXIDIZERS & SELECTED AMINES.
Stability Condition to Avoid:AVOID EXPOSURE TO SPARKS, OPEN FLAME, HOT
    SURFACES AND ALL SOURCES OF HEAT AND IGNITION. BASED ON EPOXY
    RESIN, AVOID HIGH TEMPERATURES.
Hazardous Decomposition Products:IN PRESENCE OF AIR AY FORM OXIDES OF
    CARBON AND VARIOUS HYDROCARBONS. BASED ON EPOXY RESIN, AT HIGH
    TEMPERATURES (>484F) MAY EVOLVE TOXIC FUMES.

===================  Toxicological Information	===================

Toxicological Information:VOC: THE VOC CONTENT IS DETERMINED BY USING A
    PERCENT SOLIDS BASIS, LESS WATER AND EXEMPT SOLVENTS, FOR
    ADHESIVES, COATINGS AND INKS AND THE CALCULATIONS OF EPA REFERENCE
    METHOD 24 OR EQUIVALENT ASTM  METHOD APPROVED BY THE EXECUTIVE
    OFFICE. MATL TO AVOID: ON N-BUTANOL THIS MATERIAL IS INCOMPAT
    W/STRONG OXIDIZING AGENTS, STRONG MINERAL ACIDS, ALKALI METALS &
    HALOGENS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH APPLICABLE
    LOCAL, COUNTY, STATE AND FEDERAL REGULATIONS.

=====================  Regulatory Information  =====================

Federal Regulatory Information:METHYL ISOBUTYL KETONE, XYLENE, ETHYL
    BENZENE AND N-BUTANOL ARE SUBJECT TO THE REPORTING REQUIREMENTS OF
    SECTION 313 OF THE EMERGENCY PLANNING AND COMMUNITY RIGHT-TO-KNOW
    ACT OF 1986 AND OF 40 CFR 372 . ALL THE COMPONENTS IN THIS PRODUCT
    ARELISTED IN THE TOXIC SUBSTANCE CONTROL ACT (TOSCA) INDEX.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***