=====================  Product Identification  =====================

MSDS NAME:MIL-C-22750F ACTIVATOR
NIIN:01-314-2533
Status Code:A
MSDS Number: CJDVG
=== Responsible Party ===
Company:CRAWFORD LABORATORIES, INC
Address:4165 SOUTH EMERALD AVENUE
City:CHICAGO
State:IL
ZIP:60609
Country:US
Info Phone Num:773-376-7132
Emergency Phone Num:800-424-9300
Resp. Party Other MSDS Num.:UO-137
Chemtrec Ind/Phone:(800)424-9300
CAGE:5V430
=== Contractor Identification ===
Company:CRAWFORD LABORATORIES, INC
Address:4165 SOUTH EMERALD AVENUE
Box:City:CHICAGO
State:IL
ZIP:60609
Country:US
Phone:312-376-7132
CAGE:5V430

=============  Composition/Information on Ingredients  =============

Name:METHYL ETHYL KETONE;  VP: 77.5 MM HG
CAS:78-93-3
RTECS #:EL6475000
Minumum % Wt:20.
Maxumum % Wt:50.
Other REC Limits:N/K 
OSHA PEL:590 MG/M3;200 PPM
OSHA STEL:N/K 
ACGIH TLV:590 MG/M3;200 PPM
ACGIH STEL:885 MG/M3;300 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:AMINE;  VP: 130 MM HG
CAS:63231-48-1
Minumum % Wt:5.
Maxumum % Wt:20.
Other REC Limits:N/K 
OSHA PEL:N/K 
OSHA STEL:N/K 
ACGIH TLV:N/K 
ACGIH STEL:N/K 

Name:PHENYLCARBINOL (MAY CONTAIN INGREDIENTS 4, 5, AND 6 AS
    IMPURITIES) VP: 0.1 MM HG
CAS:100-51-6
RTECS #:DN3150000
Minumum % Wt:5.
Maxumum % Wt:20.
Other REC Limits:N/K 
OSHA PEL:N/K 
OSHA STEL:N/K 
ACGIH TLV:N/K 
ACGIH STEL:N/K 

Name:BENZALDEHYDE
CAS:100-52-7
RTECS #:CU4375000
= Wt:.3
Other REC Limits:N/K 
OSHA PEL:N/K 
OSHA STEL:N/K 
ACGIH TLV:N/K 
ACGIH STEL:N/K 

Name:DIBENZYL ETHER
CAS:103-50-4
RTECS #:DQ6125000
= Wt:.1
Other REC Limits:N/K 
OSHA PEL:N/K 
OSHA STEL:N/K 
ACGIH TLV:N/K 
ACGIH STEL:N/K 

Name:HYDROQUINONE MONOMETHYL ETHER
CAS:150-76-5
RTECS #:SL7700000
= Wt:.02
Other REC Limits:N/K 
OSHA PEL:N/K 
OSHA STEL:N/K 
ACGIH TLV:5 MG/M3
ACGIH STEL:N/K 

Name:2,2-BIS(GLYCIDYLOXYPHENYL)PROPANE POLYMER; (EPOXY RESIN)
CAS:25085-99-8
Minumum % Wt:5.
Maxumum % Wt:20.
Other REC Limits:N/K 
OSHA PEL:N/K 
OSHA STEL:N/K 
ACGIH TLV:N/K 
ACGIH STEL:N/K 

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:ACUTE:EPOXY RESIN: REPEATED EXPOSURE
    MAY CAUSE SKIN IRRITATION.	HAS CAUSED ALLERGIC SKIN REACTION IN
    HUMANS.   OVEREXP MAY PRDCE VARIOUS EFTS, INCL: 1-ACUTE TOXICITY,
    RSLTG IN HDCH, DIZZ, NAUS & LOSS  OF CONSCIOUSNESS. 2-SEVERE EYE
    IRRIT POSS RSLTG IN PERM DMG. 3-IRRITATED MUC MEMBS. 4-VOMITING IF
    INGESTED. 5-DEFATTING & DRYING OF SKIN. 6-SENSIT AFTER RPTD CONT.
    CHRONIC: REPORTS HAVE ASSOCIATED RE PEATED AND PROLONGED
    OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAINAND
    NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY
    CONCENTRATING AND INHALING THE CONTENTS MAY BE HARMFUL OR F ATAL.
Effects of Overexposure:SEE HEALTH HAZARDS.

=======================  First Aid Measures  =======================

Eyes: FLUSH W/PLENTY OF CLEAN LUKEWARM LOW PRESS WATER FOR AT
    LEAST 15 MINS, OCCAS LIFTING EYELIDS OPEN.	GET MED ATTN.  INHAL:
    REMOVE TO FRESH AIR & PROVIDE OXYGEN IF BRTHG IS DFCLT.  GIVE ARTF
    RESP  IF NOT BRTHG.  GET MED ATTN.	KEEP VICTIM WARM & COMFORTABLE.
     NEVER GIVE UNCON PERS LIQS.  INGEST: CALL MD IMMED.  ONLY INDUCE
    VOMIT ON INSTRUCTIONS OF MD.  IF VOMIT OCCURS SPONT, KEEP HEAD
    BELOW HIP S TO PVNT ASPIR OF LIQ INTO LUNGS.  NEVER GIVE ANYTHING
    BY MOUTH TO UNCON PERS.SKIN: FLUSH W/WATER WHILE REMOVING CONTAM
    CLTHG & SHOES.  FOLLOW BY WASHING W/SOAP & WATER.  DO NOT REUSE
    CONTAM CLTHG/SH OES.  IF IRRIT PERSISTS, GET MED ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:=-5.6C, 22.F
Lower Limits:2.0%
Extinguishing Media:FOAM, CARBON DIOXIDE, OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .  WATER MAY BE USED TO KEEP EXPOSED CONTAINERS COOL, AND
    TO KEEP FLAMMABLE STRUCTURES WET.  DO NOT ENTER FIRE AREA WITHOUT
    PROPER PROTECTI ON BECAUSE HAZARDOUS DECOMPOSITION PRODUCTS MAY BE
    PRESENT.
Unusual Fire/Explosion Hazard:WATER PRESSURE MAY SPREAD A FLAMMABLE
    LIQUID FIRE.  SEALED CONTAINERS MAY EXPLODE IF OVERHEATED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WARNING - FLAMMABLE.  ELIMINATE ALL IGNITION
    SOURCES.  HANDLING EQUIPMENT MUST BE GROUNDED TO PREVENT SPARKING. 
    SOAK UP WITH AN ABSORBENT AND PLACE IN NON-LEAKING CONTAINERS. 
    SEAL TIGHTLY FOR PROPER  DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:TREAT AS HAZ-FLAM MATL.  KNOW APPLIC
    D.O.T. REGS BEFORE ATTEMPTING TO TRANSPORT THIS MATL.  WARNING: HOT
    ORG CHEM VAPS/MISTS ARE SUSCEPTIBLE TO SUDDEN SPONT COMBUST WHEN
    MIXED W/AIR.  IGNIT MAY OCCUR  AT TEMPS BELOW THOSE PUBLISHED IN
    LITERATURE AS "AUTOIGNIT"/"IGNIT" TEMPS.
Other Precautions:IGNIT TEMPS DECR W/INCR VAP VOL & VAP/AIR CONT TIME &
    ARE INFLUENCED BY PRESS CHANGES.  IGNIT MAY OCCUR AT TYPICAL
    ELEVATED TEMP PROCESS CNDTNS, ESP IN PROCESS OPERATING UNDER VACUUM
    IF SUBJECTED TO S UDDEN INGRESS OF AIR/OUTSIDE PROCESS EQUIP
    OPERATING UNDER ELEVATED PRESS IF SUDDEN ESCAPE OF VAPS/M ISTS TO 
    (SUP DAT)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:PROPERLY FITTED NIOSH APPROVED RESPIRATORS SHALL
    BE USED DURING APPLICATION UNLESS AIR MONITORING DEMONSTRATES
    VAPOR/MIST LEVELS ARE BELOW APPLICABLE LIMITS.
Ventilation:EFFECTIVE ENGINEERING CONTROLS SHOULD BE USED WHENEVER
    POSSIBLE.
Protective Gloves:USE RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES AND/FULL LENGTH
    FACESHIELD	.
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA .
Supplemental Safety and Health
OTHER PREC: ATM OCCURS.  ANY PROPOSED USE OF THIS PROD IN ELEVATED TEMP
    PROCESSES SHOULD BE THORO EVALUATED TO ASSURE THAT SAFE OPERATING
    CNDTNS ARE ESTABLISHED & MAINTAINED.

==================  Physical/Chemical Properties  ==================

Boiling Pt:>79.4C, 175.F
B.P. Text:175-401 F
Vapor Pres:SEE INGREDIENTS
Vapor Density:HVR/AIR
Spec Gravity:1.06 (CALC )
Evaporation Rate & Reference:3.77 X N-BUTYL ACETATE
Appearance and Odor:CLEAR LIQUID.
Percent Volatiles by Volume:80.9

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MAY BE INCOMPATIBLE WITH OXIDIZING AGENTS AND STRONG ALKALIES.
Stability Condition to Avoid:AVOID HEAT, SPARKS, OPEN FLAMES, AND
    INCOMPATIBILITIES BELOW.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION FOR PRODUCTS
    LIKE THIS MAY GENERATE HIGHLY POISONOUS CARBON MONOXIDE AND OTHER
    TOXIC GASES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH CURRENT
    LOCAL, STATE AND FEDERAL REGULATIONS.  CONTACT AN APPROVED DISPOSAL
    FACILITY.

=====================  Regulatory Information  =====================

SARA Title III Information:METHYL ETHYL KETONE IS SUBJECT TO THE
    REPORTING REQUIREMENTS OF SECTION 313 OF THE EMERGENCY PLANNING AND
    COMMUNITY RIGHT-TO-KNOW ACT OF 1986 AND OF 40 CFR 372.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***