===================== Product Identification =====================
MSDS NAME:MINIPAX (SILICA GEL)
NIIN:01-362-9257
Status Code:A
MSDS Number: CJQCS
=== Responsible Party ===
Company:MULTISORB TECHNOLOGIES, INC.
Address:325 HARLEM ROAD
City:BUFFALO
State:NY
ZIP:14224
Country:US
Info Phone Num:716-824-8900
Emergency Phone Num:716-824-8900
Resp. Party Other MSDS Num.:M49
Preparer's Name:G.E. MCKEDY
CAGE:22627
=== Contractor Identification ===
Company:MULTISORB TECHNOLOGIES INC
Address:325 HARLEM ROAD
Box:City:BUFFALO
State:NY
ZIP:14224-1893
Country:US
Phone:716-824-8900
CAGE:22627
Company:SIGMA TECH ENTERPRISES INC
Address:90 GLEN WAY SUITE 16
Box:City:SAN CARLOS
State:CA
ZIP:94070
Country:US
Phone:415-591-2510
Contract Num:SP0450-99-M-NG14
CAGE:04KF9
============= Composition/Information on Ingredients =============
Name:SIO2 (AMORPHOUS SILICA GEL)
CAS:7631-86-9
Minumum % Wt:85.
Maxumum % Wt:95.
OSHA PEL:20 MPPCF
ACGIH TLV:10 MG/M3 T DUST
ACGIH STEL:3 MG/M3 R DUST
Name:NON-HAZARDOUS INGREDIENTS HIGH DENSITY POLYETHYLENE FIBER
(TYVEK)
Minumum % Wt:5.
Maxumum % Wt:15.
===================== Hazards Identification =====================
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TARGET ORGANS: N/P. ACUTE: MAY CAUSE
EYE, SKIN AND MUCOUS MEMBRANE IRRITATION. CHRONIC: MAY CAUSE EYE,
SKIN AND MUCOUS MEMBRANE IRRITATION.
Explanation of Carcinogenicity:NOT LISTED
Effects of Overexposure:DRYING AND DISCOMFORT
Medical Cond Aggravated by Exposure:ASTHMA
======================= First Aid Measures =======================
First Aid:EYE CONTACT: WASH WITH LARGE AMOUNT OF WATER. GET MEDICAL
ATTENTION. SKIN CONTACT: WASH WITH LARGE AMOUNT OF WATER.
INHALATION: REMOVE TO FRESH AIR. INGESTION: MATERIALS WILL PASS
THROUGH BODY NORMALL Y, BUT PACKETS COULD CAUSE BLOCKAGE. CONTACT
PHYSICIAN.
===================== Fire Fighting Measures =====================
Autoignition Temp:=330.C, 626.F
Autoignition Temp Text:TYVEK
Extinguishing Media:WATER IS THE BEST EXTINGUISHING MEDIUM BUT DRY
CHEMICAL, CARBON DIOXIDE AND FOAM CAN BE USED.
Fire Fighting Procedures:THE HIGH DENSITY POLYETHYLENE FIBER WILL BURN,
BUT THE SILICA GEL WILL NOT.
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:SWEEP OR VACUUM UP AND DISPOSE.
====================== Handling and Storage ======================
Handling and Storage Precautions:COVER PROMPTLY TO AVOID BLOWING DUST,
IF BAGS ARE BROKEN OPEN.
Other Precautions:NONE
============= Exposure Controls/Personal Protection =============
Ventilation:LOCAL EXHAUST
Protective Gloves:LIGHT COTTON
Other Protective Equipment:NONE
Work Hygienic Practices:AVOID RAISING DUST. AVOID CONTACT WITH SKIN,
EYES, AND CLOTHING IF BAGS ARE BROKEN OPEN.
Supplemental Safety and Health
NONE
================== Physical/Chemical Properties ==================
HCC:N1
Melt/Freeze Pt:=135.C, 275.F
M.P/F.P Text:TYVEK
Spec Gravity:2.1 (SILICA GEL)
Solubility in Water:INSOLUBLE
Appearance and Odor:PRINTED WHITE PACKETS CONTAINING DRY GRANULES.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:MOISTURE, THE SILICA GEL WILL READILY
ABSORB MOISTURE.
=================== Toxicological Information ===================
Toxicological Information:NONE SPECIFIED BY MANUFACTURER.
===================== Ecological Information =====================
Ecological:NONE SPECIFIED BY MANUFACTURER.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN AN APPROVED LANDFILL ACCORDING TO
FEDERAL, STATE AND LOCAL REGULATIONS.
=================== MSDS Transport Information ===================
Transport Information:NONE SPECIFIED BY MANUFACTURER.
===================== Regulatory Information =====================
SARA Title III Information:NONE SPECIFIED BY MANUFACTURER.
Federal Regulatory Information:NONE SPECIFIED BY MANUFACTURER.
State Regulatory Information:NONE SPECIFIED BY MANUFACTURER.
======================= Other Information =======================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|