=====================  Product Identification  =====================

MSDS NAME:4 NITROPHENYL PHOSPHATE, 107905
NIIN:00N092526
Status Code:A
MSDS Number: CJSVR
=== Responsible Party ===
Company:BOEHRINGER MANNHEIM CORPORATION
Address:9115 HAGUE RD
Box:50414
City:INDIANAPOLIS
State:IN
ZIP:46250-0100
Country:US
Info Phone Num:317-845-2000
Emergency Phone Num:317-845-2000
Resp. Party Other MSDS Num.:107905-1
Preparer's Name:MICHAEL A. FAZIO
CAGE:32239
=== Contractor Identification ===
Company:BOEHRINGER MANNHEIM CORPORATION
Address:9115 HAGUE RD
Box:50414
City:INDIANAPOLIS
State:IN
ZIP:46250-0100
Country:US
Phone:317-845-2000
CAGE:32239

=============  Composition/Information on Ingredients  =============

Name:4-NITROPHENOL
CAS:100-02-7
RTECS #:SM2275000
< Wt:.2
Other REC Limits:N/K 
OSHA PEL:N/K 
OSHA STEL:N/K 
ACGIH TLV:N/K 
ACGIH STEL:N/K 
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:THE TOXICOLOGICAL PROPERTIES OF THIS
    PRODUCT HAVE NOT BEEN DETERMINED. IT CONTAINS NITROPHENOL. IN THE
    PURE FORM, IT CAN CAUSE THE FORMATION OF METHEMOGLOBIN (REDUCED
    OXYGEN IN THE BODY). SYMPTOMS MAY  INCLUDE: DRY THROAT, IRRITATION
    OF THE EYES, SKIN, AND UPPER RESPIRATORY SYSTEM AND SLIGHT SKIN
    DISCOLORATION.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

=======================  First Aid Measures  =======================

Eyes: FLUSH CONTAMINATED EYES WITH LARGE VOLUMES OF WATER FOR
    AT LEAST 15 MINUTES. ENSURE THAT WATER GETS UP UNDER THE EYELIDS.
    SEEK MEDICAL ATTENTION (AFTER FLUSHING). SKIN: FLUSH CONTAMINATED
    SKIN W ITH LARGE VOLUMES OF WATER FOR AT LEAST 15 MINUTES, AS
    CONTAMINATED CLOTHING IS REMOVED. GET MEDICAL ATTENTION IF AREA
    REMAINS IRRITATED. DO NOT WEAR CONTAMINATED CLOTHING UNTIL AFTER IT
    HAS BEEN PROP ERLY CLEANED. INGESTION: KEEP VICTIM WARM AND CALM.
    SEEK IMMEDIATE MEDICAL ASSISTANCE. INHALATION: REMOVE VICTIM TO
    FRESH AIR. GIVE OXYGEN IF BREATHING BECOMES DIFFICULT. SHOULD
    BREATHING STOP, GIVE A RTIFICIAL RESPIRATION.

=====================  Fire Fighting Measures  =====================

Flash Point:>200.C, 392.F
Extinguishing Media:AS APPROPRIATE FOR SITE CONDITIONS.
Fire Fighting Procedures:NOT APPLICABLE. WEAR NIOSH APPROVED SCBA AND
    FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. INITIATE CLEAN UP USING THE
    EQUIPMENT AND MATERIALS AS NOTED IN THE 'CONTROL MEASURES' SECTION.
    IF THE MATERIAL IS DRY, MOP UP. IF THE MATERIAL IS IN SOLUTION, USE
    AN ABSORBENT MATERIA L TO CONTAIN/PICK UP THE SPILLED SOLUTION. IN
    EITHER CASE, SEAL, LABEL, AND HOLD FOR DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NOT APPLICABLE.
Other Precautions:NOT APPLICABLE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:SHOULD NOT BE NECESSARY IF VENTILATION IS
    ADEQUATE. DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL
    REGULATIONS .
Ventilation:PROVIDE ADEQUATE GENERAL ROOM VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES ARE TO BE WORN TO PREVENT SKIN
    CONTACT.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYEWASH AND DELUGE
    SHOWER . A LAB COAT SHOULD BE WORN.
Work Hygienic Practices:DO NOT EAT, DRINK OR SMOKE WHILE USING THIS
    PRODUCT. UPON COMPLETION OF WORK ACTIVITY WITH THE REAGENT, WASH
    EXPOSED BODY PARTS WITH SOAP AND WATER. AVOID EYE OR SKIN CONTACT
    WITH THIS REAGENT.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Solubility in Water:SHOULD BE FAIRLY SOLUBLE
Appearance and Odor:POWDER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:HEAT, FLAME OR PRESSURE.
Hazardous Decomposition Products:NOT APPLICABLE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE,
    AND FEDERAL REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***