===================== Product Identification =====================
MSDS NAME:MIDALLOY
NIIN:00-529-0743
Status Code:A
MSDS Number: CJWRB
=== Responsible Party ===
Company:MIDWEST ALLOYS AND TECHNOLOGY INC
Address:2519 CASSENS DR
City:FENTON
State:MO
ZIP:63025
Country:US
Info Phone Num:UNK
Emergency Phone Num:(800)424-9300
Resp. Party Other MSDS Num.:MSDS: 1.3.2 (11/85)
Chemtrec Ind/Phone:(800)424-9300
CAGE:TO441
=== Contractor Identification ===
Company:CMAX INC
Address:6127 PERIMETER PKY
Box:11647
City:MONTGOMERY
State:AL
ZIP:36111
Country:US
Phone:334-613-0500/ FAX: 2922
Contract Num:SP0490-00-M-RE78
CAGE:2Y223
Company:MIDWEST ALLOYS AND TECHNOLOGY INC
Address:2519 CASSENS DR
Box:City:FENTON
State:MO
ZIP:63025
Country:US
Phone:UNK
CAGE:TO441
============= Composition/Information on Ingredients =============
Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Minumum % Wt:45.
Maxumum % Wt:80.
ACGIH TLV:10MG/M3 AS FE2O3
Name:CHROMIUM
CAS:7440-47-3
RTECS #:GB4200000
Minumum % Wt:11.
Maxumum % Wt:32.
OSHA PEL:1 MG/M3
ACGIH TLV:0.05 MG/M3 CR VI
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:NICKEL
CAS:7440-02-0
RTECS #:QR5950000
Minumum % Wt:4.
Maxumum % Wt:37.
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3
Name:MANGANESE
CAS:7439-96-5
RTECS #:OO9275000
Minumum % Wt:.5
Maxumum % Wt:2.5
OSHA PEL:C5 MG/M3
ACGIH TLV:1 MG/M3
Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Minumum % Wt:.1
Maxumum % Wt:1.
OSHA PEL:5 MG/M3 AS SIO2
ACGIH TLV:3 MG/M3 AS SIO2
Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Minumum % Wt:0.
Maxumum % Wt:4.
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3
===================== Hazards Identification =====================
Health Hazards Acute and Chronic:FROM ELECTRIC ARC WELDING: FUMES &
GASES CAN BE DANGEROUS TO HELATH. ARC RAYS CAN INJURE EYES & BURN
SKIN. ELECTRIC SHOCK CAN KILL. "SHORT-TERM" OVER EXPOSURE TO
WELDING FUMES MAY RESULT IN DISCOMFORT SUCH AS: DIZZINESS, NAUSEA,
OR DRYNESS OR IRRITATION OF NOSE, THROAT, OR EYES, TIGHTNESS IN
CHEST, FEVER AND ALLERGIC REACTIONS. "LONG-TERM" (CHRONIC)
OVEREXPOSURE TO WELDING FUMES MAY LEAD TO SIDERO SIS (IRON DEPOSIT
IN LUNGS) AND IS BELIEVED BY SOME INVESTIGARORS TO AFFECT PULMONARY
FUNCTION.
Effects of Overexposure:DIZZINESS, NAUSEA, OR DRYNESS OR IRRITATION OF
NOSE, THROAT, OR EYES, TIGHTNESS IN CHEST, FEVER AND ALLERGIC
REACTIONS. LONG-TERM (CHRONIC) MAY LEAD TO SIDEROSIS (IRON DEPOSIT
IN LUNGS) AND IS BELIEV ED BY SOME INVESTIGATORS TO AFFECT
PULMONARY FUNCTION.
Medical Cond Aggravated by Exposure:N/P ( PULMONARY DISORDERS)
======================= First Aid Measures =======================
First Aid:REMOVE TO FRESH AIR, OBTAIN MEDICAL ATTENTION. EMPLOY FIRST
AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED CROSS.
===================== Fire Fighting Measures =====================
Extinguishing Media:WELDING ARC AND SPARKS CAN IGNITE COMBUSTIBLES AND
FLAMMABLES. REFER TO AMERICAN NATIONAL STANDARD Z49.1 FOR FIRE
PREVENTION DURING THE USE OF WELDING AND ALLIED PROCEDURES
Fire Fighting Procedures:NONE PROVIDED BY MFR.
Unusual Fire/Explosion Hazard:NONE PROVIDED BY MFR.
================== Accidental Release Measures ==================
Spill Release Procedures:NO INFORMATION PROVIDED.
====================== Handling and Storage ======================
Other Precautions:USE EXHAUST SYSTEM TO CLEAR WELDING FUMES. MAKE SURE
THAT INHALED AIR DOES NOT CONTAIN FUME CONSTITUENTS ABOVE
PERMISSIBLE EXPOSURE LEVELS. ADDITIONAL SAFETY INFORMATION ON
WELDING AND CUTTING, SEE AM ERICAN STANDARD Z49.1-1983, SAFETY IN
WELDING AND CUTTING AND THE WELDING HANDBOOK.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE RESPIRABLE FUME RESPIRATORY OR AIR SUPPLIED
RESPIRATOR WHEN WELDING IN A CONFINED SPACE OR WHERE LOCAL EXHAUSE
OR VENTILATION DOES NOT KEEP EXPOSURE BELOW THE RECOMMENDED
EXPOSURE LIMIT.
Ventilation:USE ENOUGH VENTILATION, LOCAL EXHAUSE AT THE ARC, OR BOTH,
TO KEEP THE FUMES AND GASES FROM THE WORKERS BREATHING ZONE.
Protective Gloves:WELDERS GLOVES
Eye Protection:WEAR HELMET OR USE FACE SHIELD WITH FILTER LENS
Other Protective Equipment:WEAR HAND, HEAD & BODY PROTECTION WHICH HELP
TO PREVENT INJURY FROM RADATION, SPARKS AND ELECTRICAL SHOCK. ARM
PROTECTORS, APRONS HATS, SHOULDER PROTECTION, DARK SUBSTANTIAL
CLOTHING.
Work Hygienic Practices:NONE PROVIDED BY MFR.
Supplemental Safety and Health
NONE PROVIDED BY MFR.
================== Physical/Chemical Properties ==================
HCC:N1
Appearance and Odor:SOLID WELDING RODS
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:OXIDES OF IRON, COMPLEX OXIDES OF
CHROMIUM, NICKEL, MANGANESE, SILICON AND MOLYBDENUM. MAY INCLUDE
OXIDES OF CARBON, OZONE, NITROGEN OXIDES MAY BE FORMED BY THE
RADIATION FROM THE ARC.
Conditions to Avoid Polymerization:C/CE
==================== Disposal Considerations ====================
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT RESIDUE, DISPOSIBLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPILANCE
WITH FEDERAL, STATE AND LOCAL REGULATIONS.
===================== Regulatory Information =====================
SARA Title III Information:FOLLOWING INGREDIENTS ARE COVERED UNDER THE
REPORTING REQUIREMENTS OF SEC 313 OR EPCRA: CHROMIUM, NICKEL AND
MANGANESE.
======================= Other Information =======================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|