=====================  Product Identification  =====================

MSDS NAME:JELTRATE PLUS
NIIN:01-137-8473
Status Code:A
MSDS Number: CKRCG
=== Responsible Party ===
Company:CAULK/DENTSPLY
Address:38 W CLARKE AVE
Box:359
City:MILFORD
State:DE
ZIP:19963-0359
Country:US
Info Phone Num:302-422-4511/ 703-451-1900
Emergency Phone Num:302-422-4511
CAGE:11107
=== Contractor Identification ===
Company:CAULK/DENTSPLY
Address:38 W CLARKE AVE
Box:359
City:MILFORD
State:DE
ZIP:19963-0359
Country:US
Phone:302-422-4511/ 703-451-1900
CAGE:11107

=============  Composition/Information on Ingredients  =============

Name:DIATOMACEOUS EARTH-FLUX-CALCINED
CAS:68855-54-9
Other REC Limits:0.8 MG/M3
OSHA PEL:80 MG/M3
ACGIH TLV:10 MG/M3

Name:POTASSIUM ALGINATE
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3

Name:TETRASODIUM PYROPHOSPHATE
CAS:7722-88-5
RTECS #:UX7350000
OSHA PEL:N.E.
ACGIH TLV:5 MG/M3

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:RESPIRABLE DUST FROM THIS PRODUCT WILL
    TYPICALLY CONTAIN UP TO 40 FREE CRYSTALLINE SILICA.  AS SUCH IT
    REPRESENTS A RISK TO THE RESPIRATORY SYSTEM.  LONG TERM,
    UNPROTECTED EXPOSURE TO DUST LEVELS IN E XCESS OF THE PEL MAY CAUSE
    LUNG DISEASE.
Effects of Overexposure:CONGESTION AND IRRITATION OF THE THROAT, NASAL
    PASSAGES AND UPPER RESPIRATORY SYSTEM.  NOT HAZARDOUS WHEN
    INGESTED.  MAY TEMPORARILY IRRITATE THE EYES.
Medical Cond Aggravated by Exposure:PRE-EXISTING UPPER RESPIRATORY AND
    LUNG DISEASES SUCH AS BUT NOT LIMITED TO BRONCHITIS, EMPHYSEMA, AND
    ASTHMA.

=======================  First Aid Measures  =======================

First Aid:REMOVE TO FRESH AIR.	DRINK WATER TO CLEAR THROAT AND BLOW
    NOSE.  FOR EYES FLUSH WITH COPIOUS AMOUNTS OF WATER FOR 10 MINUTES.

=====================  Fire Fighting Measures  =====================

Lower Limits:N.A.
Upper Limits:N.A.
Extinguishing Media:N.A.
Fire Fighting Procedures:N.A.
Unusual Fire/Explosion Hazard:IN COMMON WITH MOST ORGANIC MATERIALS. 
    THIS PRODUCT SHOULD BE TREATED AS A COMBUSTIBLE DUST IN THE FINELY
    DIVIDED AND SUSPENDED STATE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:THE AVOIDANCE OF ANY AIR CONTAMINATE IS ALWAYS
    RECOMMENDED PRACTICE.  ADHERENCE TO WORK PLACE VENTILATION
    STANDARDS IS AN ASSURANCE OF GENERAL PERSONNEL HEALTH AND COMFORT. 
    NO SPECIAL CLEAN-UP PROCED URES ARE REQUIRED.

======================	Handling and Storage  ======================

Handling and Storage Precautions:OBSERVE NORMAL WAREHOUSING PROCEDURES.
     STORE IN A COOL DRY AREA.
Other Precautions:STORE AWAY FROM FOODSTUFFS AND BEVERAGES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:RECOMMENDED NIOSH APPROVED NUSIANCE DUST MASK.
Ventilation:LOCAL EXHAUST REQUIRED; SPECIAL: N.A.; MECHANICAL: GENERAL:
    RECOMMENDED
Protective Gloves:RUBBER GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:RUBBER APRON
Work Hygienic Practices:AVOID DUSTING WHEN IN USE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:N.A.
Melt/Freeze Pt:M.P/F.P Text:N.A.
Vapor Pres:N.A.
Vapor Density:N.A.
Spec Gravity:0.3
Evaporation Rate & Reference:N.A.
Solubility in Water:PARTIALLY
Appearance and Odor:DRY FLUFFY POWDER WITH SPEARMINT ODOR; MAY BE
    COLORED.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
HYDROFLUORIC ACID.
Stability Condition to Avoid:HIGH HUMIDITY AND WATER CONTAMINATION WILL
    CAUSE MATERIAL TO GEL.  PROLONGED HEAT OVER 60 C.
Hazardous Decomposition Products:N.A.
Conditions to Avoid Polymerization:HIGH HUMIDITY AND PROLONGED HEAT
    OVER 60C.

====================  Disposal Considerations  ====================

Waste Disposal Methods:SWEEP UP SPILLED MATERIAL, PLACE IN CLOSED
    CONTAINERS.  DISPOSE OF CONTAINERS IN ACCORDANCE WITH LOCAL, STATE
    OR FEDERAL WASTE DISPOSAL PROCEDURES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***