=====================  Product Identification  =====================

MSDS NAME:1313 SATIN FINISH, INDUSTRIAL MAINTENANCE & TOUCH UP SPRAY
NIIN:00-280-1257
Status Code:A
MSDS Number: CKRBD
=== Responsible Party ===
Company:SHERWIN WILLIAMS, DIVERSIFIED BRANDS INC.
Address:31500 SOLON ROAD
Box:NONE
City:SOLON
State:OH
ZIP:44139
Country:US
Info Phone Num:800-832-2641/247-3270
Emergency Phone Num:215-566-2917
Resp. Party Other MSDS Num.:IM1/KRI
CAGE:PO273
=== Contractor Identification ===
Company:SHERWIN WILLIAMS, DIVERSIFIED BRANDS INC.
Address:31500 SOLON ROAD
Box:NONE
City:SOLON
State:OH
ZIP:44139
Country:US
Phone:800-832-2641/247-3270
CAGE:PO273

=============  Composition/Information on Ingredients  =============

Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
= Wt:16.
OSHA PEL:1800 MG/M3;1000 PPM

Name:BUTANE
CAS:106-97-8
RTECS #:EJ4200000
= Wt:7.
ACGIH TLV:1900 MG/M3;800 PPM

Name:TOLUENE
CAS:108-88-3
RTECS #:XS5250000
= Wt:42.
OSHA PEL:SEE TABLE Z-2
ACGIH TLV:188 MG/M3;50 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:ACETONE
CAS:67-64-1
RTECS #:AL3150000
= Wt:29.
OSHA PEL:2400 MG/M3;1000 PPM
ACGIH TLV:1780 MG/M3;750 PPM
ACGIH STEL:2380 MG/M3;1000 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NO DATA PROVIDED BY RESPONSIBLE PARTY.
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:IRRITATION OF EYES, SKIN AND
    RESPIRATORY SYSTEM. MAY CAUSE NERVOUS SYSTEM DESPRESSION.
Explanation of Carcinogenicity:NO INGREDIENTS IN THESE PRODUCTS IS AN
    IARC, NTP OR OSHA LISTED CARCINOGEN.
Effects of Overexposure:EXTREME OVEREXPOSURE MAY RESULT IN
    UNCONSCIOUSNESS AND POSSIBLY DEATH. HEADACHE, DIZZINESS, NAUSEA,
    AND LOSS OF COORDINATION ARE INDICATIONS OF EXCESSIVE EXPOSURE TO
    VAPORS OF SPRAY MISTS. REDNESS AND	ITCHING OR BURNING SENSATION
    MAY INDICATE EYE OR EXCESSIVE SKIN EXPOSURE.
Medical Cond Aggravated by Exposure:NONE GENERALLY RECOGNIZED.

=======================  First Aid Measures  =======================

First Aid:INHALED: IF AFFECTED, REMOVE FROM EXPOSURE. RESTORE
    BREATHING. KEEP WARM & QUIET. IN ON SKIN:  WASH AFFECTED AREA
    THOROUGHLY WITH SOAP & WATER.  REMOVE CONTAMINATED CLOTHING &
    LAUNDER BEFORE RE-USE.   IF IN EYES: FLUSH EYES WITH LARGE AMOUNTS
    OF WATER FOR 15 MINUTES. GET MEDICAL ATTENTION. IF SWALLOWED: NEVER
    GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. DO NOT INDUCE
    VOMITING. GIVE CONSCIOUS PA TIENT SEVERAL GLASSES OF WATER. SEEK
    MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:<-17.6C, 0.F
Lower Limits:1.0
Upper Limits:13.1
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT INCLUDING
    SELF-CONTAINED BREATHING APPARATUS SHOULD BE USED. WATER SPRAY MAY
    BE INEFFECTIVE. IF WATER IS USED. FOG NOZZLES ARE PREFERABLE. WATER
    MAY BE USED TO COOL CLOSED CO NTAINERS TO PREVENT PRESSURE BUILD-UP
    AND POSSIBLE AUTOIGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME
    HEAT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY ESPLODE(DUE TO THE
    BUILD-UP OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT. ISOLATE FROM
    HEAT, ELECTRICAL EQUIPMENT, SPARKS AND IPEN FLAMES. APPLICATION TO
    HOT SURFACES REQUIRES SPECI AL PRECAUTIONS. DURING EMERGENCY
    CONDITIONS OVEREXPOSURE TO DECOMPOSITION PRODUCTS MAY CAUSE HEALTH
    HAZARD.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
    REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NO DATA PROVIDED BY RESPONSIBLE PARTY.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
    FLAME. VAPORS WILL ACCUMULATE READILY & MAY IGNITE EXPLOSIVELY.
    DURING USE & UNTIL ALL VAPORS ARE GONE KEEP AREA VENTILATED-DO NOT
    SMIKE-EXTINGUISH ALL FLAMES, PILOT	LIGHTS, AND HEATERS-TURN OFF
    STOVES, ELECTRIC TOOLS AND APPLIANCES AND ANY OTHER IGNITION
    SOURCES.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
    INHALING THE  CONTENTS CAN BE HARMFUL OR FATAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF PERSONAL EXPOSURE CANNOT BE CONTROLLED BELOW
    APPLICABLE LIMITS BY VENTILATION, WEAR A PROPERLY FITTED ORGANIC
    VAPOR/PARTICULATE RESPIRATOR APPROVED BY NIOSH/MSHA FOR PROTECTION
    AGAINST MATERIALS IN  SECTION II. WHEN SANDING OR ABRADING THE
    DRIED FILM WEAR A DUST/MIST RESPIRATOR APPROVED BY NIOSH/MSHA FOR
    DUST WHICH MAY BE GENERATED FROM THIS PRODUCT. UNDER
Ventilation:LOCAL EXHAUST PREFERABLE. GENERAL EXHAUST ACCEPTABLE IF THE
    EXPOSURE TO MATERIALS IN  SECTION II IS MAINTAINED BELOW APPLICABLE
    EXPOSURE LIMITS.
Protective Gloves:NONE REQUIRED FOR NORMAL APPLICATION OF AEROSOL
    PRODUCTS WHERE MINIMAL SKIN CON
Eye Protection:SAFETY SPECTACLES WITH UNPERFORATED SIDESHIELDS.
Supplemental Safety and Health
REPORTS HAVE ASSOCIATED REPEATED AND PROLONGE OVEREXPOSURE TO SOLVENTS
    WITH PERMANENT BRAINA DN NERVOUS SYSTEM DAMAGE.

==================  Physical/Chemical Properties  ==================

HCC:V3
Boiling Pt:<-17.6C, 0.F
B.P. Text:<0-303F
Melt/Freeze Pt:M.P/F.P Text:N.A
Vapor Pres:N.A
Vapor Density:>1
Spec Gravity:N.A
Evaporation Rate & Reference:>1 (ETHER=1)
Solubility in Water:N.A
Appearance and Odor:NO DATA PROVIDED BY RESPONSIBLE PARTY.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NO DATA PROVIDED BY RESPONSIBLE PARTY.
Hazardous Decomposition Products:BY FIRE: CARBON DIOXIDE, CARBON
    MONOXIDE, OXIDES OF METALS IN SECTION II.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

===================  Toxicological Information	===================

Toxicological Information:PROLONGED OVER EXPOSURE TO SOLVENT
    INGREDIENTS MAY CAUSE ADVERSE EFFECTS TO LIVER, URINARY,
    BLOOD-FORMING, CARDIOVASCULAR & REPRODUCTIVE SYSTEMS.

=====================  Ecological Information  =====================

Ecological:NO DATA PROVIDED BY RESPONSIBLE PARTY.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE FROM THIS PRODUCT MAY BE HAZARDOUS AS
    DEFINED UNDER THE RESOURCES CONSERVATION AND RECOVERY ACT (RCRA)40
    CFR 261. WASTE MUST BE TESTED FOR IGNITABILITY ITO DETERMINE THE
    APPLICABLE EPA HAZARDOUS E WASTE NUMBERS. WASTE FROM PRODUCTS
    CONTAINING METHYL ETHYL KETONE OR COPPER MAY REQUIRE TESTING FO R
    EXTRACTABILITY. DO NOT INCINERATE. DEPRESSURIZE

===================  MSDS Transport Information  ===================

Transport Information:NO DATA PROVIDED BY RESPONSIBLE PARTY.

=====================  Regulatory Information  =====================

SARA Title III Information:TOLUENE, CAS# 108-88-3, 42% AND ACETONE,
    CAS# 67-64-1, 29% ARE SUBJECT TO THE REPORTING REQUIREMENTS OF THE
    SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT (SARA) SECTION 313, 40
    CFR 372.65 C.
Federal Regulatory Information:ALL CHEMICALS IN THESE PRODUCTS	ARE
    LISTED, OR EXEMPT FROM LISTING, ON THE TSCA INVENTORY.
State Regulatory Information:WARNING: THESE PRODUCTS CONTAIN A
    CHEMICAL(S) KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND
    BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***