=====================  Product Identification  =====================

MSDS NAME:SILANE SOLUTION PR-1826 ADHESION PROMOTER
NIIN:01-290-5136
Status Code:A
MSDS Number: CLRNW
=== Responsible Party ===
Company:PRC-DESOTO INTERNATIONAL, INC,  A PPG INDUSTRIES CO
Address:5430 SAN FERNANDO RD
Box:1800
City:GLENDALE
State:CA
ZIP:91209
Country:US
Info Phone Num:818-240-2060 / 800-228-5635
Emergency Phone Num:800-228-5635
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:1LFF4
=== Contractor Identification ===
Company:PRC-DESOTO INTERNATIONAL, INC,  A PPG INDUSTRIES CO
Address:5430 SAN FERNANDO RD
Box:1800
City:GLENDALE
State:CA
ZIP:91209
Country:US
Phone:818-240-2060 / 800-228-5635
CAGE:1LFF4

=============  Composition/Information on Ingredients  =============

Name:SILSESQUIOXANES, 3-((2-AMINOETHYL)AMINO)PROPYL,
    MONOHYDROCHLORIDES, POLYMERS W/ETHYLENIMINE  *96-4*
CAS:68037-89-8
< Wt:5.

Name:METHYL ETHYL KETONE
CAS:78-93-3
RTECS #:EL6475000
= Wt:70.
OSHA PEL:590 MG/M3;200 PPM
ACGIH TLV:590 MG/M3;200 PPM
ACGIH STEL:885 MG/M3;300 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:ORGANOSILANE PHENOLIC-RESIN ADDUCT
= Wt:10.

Name:ISOPROPYL ALCOHOL
CAS:67-63-0
RTECS #:NT8050000
= Wt:10.
OSHA PEL:980 MG/M3;400 PPM
ACGIH TLV:983 MG/M3;400 PPM
ACGIH STEL:1230 MG/M3;500 PPM

Name:2,4,6-TRIS.(.(DIMETHYLAMINO)METHYL.).PHENOL
CAS:90-72-2
RTECS #:SN3500000
< Wt:5.

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:EYES:MAY CAUSE BURNING, TEARING AND
    REDDENING. POSSIBLE TRANSIENT CORNEAL CLOUDING. SKIN: PROLONGED
    EXPOSURE MAY CAUSE REDNESS, BURNING, DRYING AND CRACKING OF SKIN.
    INHALATION: MAY CAUSE COUGHING, CH EST PAINS. THROAT IRRITATION.
    MAY CAUSE HEADACHES AND DIZZINESS; MAY BE ANESTHETIC AND MAY CAUSE
    OTHER CENTRAL NERVOUS SYSTEM EFFECTS. REVERSIBLE LIVER DAMAGE IS
    POSSIBLE AT HIGH DOSES. INGESTION: MAY  CAUSE DROWSINESS,
    DIZZINESS, AND NAUSEA.
Effects of Overexposure:EYES: MAY CAUSE BURNING, TEARING AND REDDENING.
    SKIN: MAY CAUSE SEVERE BURN OR SYSTEMIC POISONING. PROLONGED AND
    WIDESPRED CONTACT WITH THE SKIN MAY RESULT IN THE ABSORPTION OF
    POTENTIALLY HARMFUL AMO UNTS OF MATERIAL. IT  MAY ALSO CAUSE
    ALLERGIC SKIN RASH IN SENSITIZED INDIVIDUALS. INHALATION:MAY CAUSE
    DIZZINESS, DROWSINESS AND FATIGUE. INGESTION: NAUSEA, ABDOMINAL
    PAIN, VOMITING, HEADACHE, DIZZIN ESS SHORTNESS OF BREATH,
    CONFUSION, DRUNKEN DEHAVIOR, VISUAL DISTURBANCES AND DROWSINESS.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH WARM WATER FOR 15 MINUTES. IF SYMPTOMS
    PERSIST, CONSULT PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. IF
    SYMPTOMS PERSIST, CONSULT A PHYSICIAN. INHALATION: REMOVE TO FRESH
    AIR. IF SYMPTO MS ARE PRESENT CONSULT A PHYSICIAN. INGESTION: DO
    NOT INDUCE VOMITING. CONSULT A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:=-5.C, 23.F
Lower Limits:1.8%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:USE AIR SUPPLIED RESPIRATOR. USE WATER TO COOL
    HEAT EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:HIGH TEMPERATURE MAY CAUSE PRESSURE BUILD
    UP IN CLOSED CONTAINER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. WEAR AIR SUPPLIED
    RESPIRATOR FOR MAJOR UNVENTILATED SPILL. COVER WITH ABSORBENT.
    SCOOP INTO CONTAINERS. CLEAN UP RESIDUE WITH A SUITABLE SOLVENT.

======================	Handling and Storage  ======================

Other Precautions:EMPTY DRUMS MAY CONTAIN EXPLOSIVE VAPORS. DO NOT CUT,
    PUNCTURE OR WELD ON OR NEAR DRUM. VAPORS OF THIS PRODUCT ARE
    HEAVIER THAN AIR AND MAY COLLECT IN LOW OR CONFINED AREAS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHEN SPRAYING OR APPLYING IN ANY CIRCUMSTANCES
    LIKELY TO PRODUCE AIRBORNE LEVEL OF HAZARDOUS INGREDIENTS IN EXCESS
    OF TLV, USE AN ORGANIC VAPOR CARTRIDGE OR AIR-SUPPLIED RESPIRATOR.
    USE NIOSH APPROVED	10-15X PARTICULATE RESPIRATOR WHEN SANDING OR
    GRINDING THE CURED PRODUCT.
Ventilation:GENERAL VENTILATION TO MAINTAIN VAPORS BELOW TLV.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEMICAL GOGGLES OR FULL-FACE SHIELD.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:175-601 DEG.F
Vapor Density:HEAVIER
Spec Gravity:0.82
VOC Grams/Liter:6.83
Appearance and Odor:LIGHT AMBER LIQUID
Percent Volatiles by Volume:85.8%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENT.
Hazardous Decomposition Products:OXIDES OF CARBON.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:EPA NO. D-001 AND D-035 HAZARDOUS WASTE. DISPOSE
    OF IN COMPLIANCE WITH FEDERAL AND STATE REGULATIONS.

=====================  Regulatory Information  =====================

State Regulatory Information:

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***