=====================  Product Identification  =====================

MSDS NAME:SILICONE RUBBER MIXTURE
NIIN:00-118-2695
Status Code:A
MSDS Number: CLRPR
=== Responsible Party ===
Company:GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
Address:HUDSON RIVER RD
City:WATERFORD
State:NY
ZIP:12188
Country:US
Info Phone Num:518-237-3330/800-332-3390
Emergency Phone Num:800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:01139
=== Contractor Identification ===
Company:GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
Address:260 HUDSON RIVER RD
Box:City:WATERFORD
State:NY
ZIP:12188
Country:US
Phone:518-237-3330/800-332-3390
CAGE:01139

=============  Composition/Information on Ingredients  =============

Name:HYDROXY-TERMINATED DI-ME SILOXANES
CAS:70131-67-8
Minumum % Wt:60.
Maxumum % Wt:80.

Name:METHYLTRIMETHOXYSILANE
CAS:1185-55-3
RTECS #:VV4650000
Minumum % Wt:1.
Maxumum % Wt:5.

Name:1,3,5-TRIS(GAMMA-TRIMETHOXYSILYLPROPYL)ISOCYANURATE
CAS:26115-70-8
Minumum % Wt:1.
Maxumum % Wt:5.

Name:DIMETHYLPOLYSILOXANES
CAS:63148-62-9
RTECS #:JT6484500
Minumum % Wt:5.
Maxumum % Wt:10.

Name:D4&HMDZ TREATED SILICON DIOXIDE (LD50 3160MG/KG RT)
    (NON-HAZ)
CAS:68937-51-9
Minumum % Wt:10.
Maxumum % Wt:30.
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGESTION: MAY BE HARMFUL IF
    SWALLOWED. SKIN CONTACT: UNCURED PRODUCT CONTACT WILL IRRITATE
    LIPS, GUMS AND TONGUE.  INHALATION: CAUSES MILD RESPIRATORY
    IRRITATION. APPLIES ONLY IN UNCURED STATE. EYE C ONTACT: UNCURED
    PRODUCT CONTACT IRRITATES EYES.
Explanation of Carcinogenicity:THIS PRODUCT OR ONE OF ITS INGREDIENTS
    PRESENT 0.1% OR MORE IS NOT LISTED AS A CARCINOGEN OR SUSPECTED
    CARCINOGEN BY NTP, IARC, OR OSHA.
Effects of Overexposure:THIS PRODUCT CONTAINS METHYLPOLYSILOXANES WHICH
    CAN GENERATE FORMALDEHYDE AT APPROXIMATELY 300 DEG F AND ABOVE, IN
    ATMOSPHERES  WHICH CONTAIN OXYGEN. FORMALDEHYDE IS A SKIN AND
    RESPIRATORY SENSITIZER,  EYE AND THROAT IRRITANT, ACUTE TOXICANT,
    AND POTENTIAL CANCER HAZARD. AN MSDS FOR FORMALDEHYDE IS AVAILABLE
    FROM GE SILICONES. PRODUCT RELEASES METHANOL (1-3% BY WEIGHT)
    DURING CURE PROCESS.

=======================  First Aid Measures  =======================

First Aid:INGESTION: DO NOT INDUCE VOMITING. SLOWLY DILUTE WITH 1-2
    GLASSES OF WATER OR MILK AND SEEK MEDICAL ATTENTION. SKIN: TO CLEAN
    FROM SKIN, REMOVE COMPLETELY WITH A DRY CLOTH OR PAPER TOWEL,
    BEFORE WASHI NG WITH DETERGENT AND WATER. INHALATION: MOVE PERSON
    TO FRESH AIR. EYES: IN CASE OF CONTACT, IMMEDIATELY FLUSH EYES WITH
    PLENTY OF WATER FOR AT LEAST 15 MINUTES AND GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN AN INERT MATERIAL
    AND PUT IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES WITH
    DETERGENT AND WATER TO DILUTE SLIPPING HAZARD.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONTACT WITH SKIN AND EYES. USE
    ONLY IN A WELL VENTILATED AREA. REMOVE CONTACT LENSES BEFORE USING
    SEALANT. DO NOT HANDLE LENSES UNTIL ALL SEALANT HAS BEEN CLEANED
    FROM THE FINGERTIPS, NAILS AND  CUTICLES. RESIDUE SEALANT MAY
    REMAIN ON FINGERS FOR SEVERAL DAYS AND TRANSFER TO LENSES AND CAUSE
    S

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE IN A WELL VENTILATED AREA.
Ventilation:USE ONLY IN WELL VENTILATED AREA.
Protective Gloves:CLOTH GLOVES.
Eye Protection:SAFETY GLASSES.
Work Hygienic Practices:EYEWASH STATIONS. USE IN A WELL VENTILATED
    AREA.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Spec Gravity:1.085
Evaporation Rate & Reference:<1
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID SWEET WHITE.
Percent Volatiles by Volume:<4

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONT KNOWN.
Stability Condition to Avoid:NOT KNOWN.
Hazardous Decomposition Products:OXIDES OF NITROGEN AND SULFUR,
    HYDROGEN CHLORIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
    FEDERAL, STATE AND LOCAL REGULATIONS. BURY IN A LICENSED LANDFILL
    OR BURN IN AN APPROVED INCINERATOR ACCORDING TO FEDERAL, STATE, AND
    LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***