=====================  Product Identification  =====================

MSDS NAME:ETHYLENE GLYCOL MONOMETHYL ETHER
NIIN:00-753-5061
MSDS Number: BFNKX
=== Responsible Party ===
Company:AMCO CHEMICAL CORP
Address:3RD - CYPRS
Box:208
City:OAKLAND
State:CA
ZIP:94607
Country:US
CAGE:97984
=== Contractor Identification ===
Company:AMCO CHEMICAL CORP
Address:3RD - CYPRS
Box:208
City:OAKLAND
State:CA
ZIP:94607
Country:US
Phone:NOT IN BUSINESS! 911008P505A ???
CAGE:97984

=============  Composition/Information on Ingredients  =============

Name:2-METHOXYETHANOL (EGME)  (SARA III)
CAS:109-86-4
RTECS #:KL5775000
Fraction by Wt: 100%
OSHA PEL:S, 25 PPM
ACGIH TLV:S, 5 PPM; 9192

=====================  Hazards Identification  =====================

Effects of
    Overexposure:HEADACHE,DIZZINESS,STUPOR,NAUSEA,VOMITING,KIDNEY
    INJURY,DROWSINESS,ANEMIA,WEAKNESS,SLEEPINESS

=======================  First Aid Measures  =======================

First Aid:INGESTION:DRINK 2 GLASSES OF WATER & INDUCE VOMITING BY
    PUTTING FINER DOWN THROAT.CALL A DOCTOR.SKIN:REMOVE CONTAMINATED
    CLOTHING & FLUSH SKIN WITH WATER.INHALATION:REMOVE TO FRESH
    AIR.CALL A DOCTOR I F SYMPTOMS PERSIST.EYES:FLUSH WITH WATER.

=====================  Fire Fighting Measures  =====================

Flash Point:103F TCC
Lower Limits:2.5
Upper Limits:19.8
Extinguishing Media:WATER SPRAY,CO*2,DRY CHEMICAL,ALCOHOL-TYPE FOAMS
Fire Fighting Procedures:USE SUPPLIED BREATHING AIR.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR SUITALBLE PROTECTIVE EQUIPMENT.COLLECT
    FOR DISPOSAL

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONTACT W/EYES,SKIN, &
    CLOTHING.AVOID BREATHING VAPORS.KEEP AWAY FROM HEAT & OPEN
    FLAME.KEEP CONTAINER CLOSED.USE W/ADEQUATE VENTILATION.
Other Precautions:WASH THOROUGHLY AFTER HANDLING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:SUPPLIED-AIR RESPIRATOR FOR HIGH CONCENTRATIONS.
Ventilation:GENERAL (MECH) ROOM VENTILATION IS EXPECTED TO BE ADEQUATE
Protective Gloves:PLASTIC
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:EYE BATH & SAFETY SHOWER.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:256.1F
Vapor Pres:6.2
Vapor Density:2.62
Spec Gravity:0.9663
Evaporation Rate & Reference:0.47,BUTYL ACETATE
Solubility in Water:COMPLETE
Appearance and Odor:WATER-WHITE LIQUID;MILD AND CHARACTERISTIC ODOR.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AS WITH ALL ORGANIC MATLS CONTAINING C & H,CHEM.OXIDS,IGNIT.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:BURNING PRODUCES CO &/OR CO*2

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN A FURNACE WHERE PERMITTED UNDER
    APPROPRIATE FEDERAL,STATE,AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***