===================== Product Identification =====================
MSDS NAME:TT-P-96C WHITE LATEX PAINT
NIIN:00-754-2609
MSDS Number: BFNMP
=== Responsible Party ===
Company:ATLAS PAINT & VARNISH CO.
Emergency Phone Num:(201)373-3300
CAGE:KO008
=== Contractor Identification ===
Company:ATLAS PAINT & VARNISH CO.
CAGE:KO008
Company:ATLAS PAINT AND VARNISH CO
CAGE:84239
============= Composition/Information on Ingredients =============
Name:PIGMENTS(SEE SUPPLIMENTAL DATA FOR SPECIFIC TYPES).
Fraction by Wt: 38.0%
ACGIH TLV:15MG/CUM (MFG)
Name:RESIN EMULSION
Fraction by Wt: 21.0%
ACGIH TLV:200 PPM (MFG)
Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 40.0%
Name:BIOCIDE SURFACTANT ANTI-FOAM
Fraction by Wt: 1.0%
===================== Hazards Identification =====================
Effects of Overexposure:POSSIBLE SKIN & EYE IRRITATION.
======================= First Aid Measures =======================
First Aid:ON CONTACT, WASH SKIN W/PLENTY OF WATER. WASH EYES AT ONCE
W/WATER FOR AT LEAST 15 MIN - CALL PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point:NON FLAMMABLE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:ABSORB ON DRYING MATERIAL. PLACE IN WASTE
CONTAINER FOR DISPOSAL, WASH AREA W/WATER. DO NOT FLUSH INTO PUBLIC
WATER SOURCE.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AT ROOM TEMPERATURES. DO NOT
FREEZE.
============= Exposure Controls/Personal Protection =============
Ventilation:LOCAL:GOOD NATURAL DRAFT. MECH:EXHAUST BLOWER TO RID FUMES.
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Supplemental Safety and Health
PIGMENTS:TIO*2, ALUM SILICATE. MFG GIVES % VOLATILE AS 0.59 & THE TLV
OF 10 PPM (AIR) FOR VINYL ACETATE.
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:1.4400
Solubility in Water:COMPLETE
Appearance and Odor:VIRTUALLY NO ODOR - THIN WHITE LATEX PAINT.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:DO NOT HEAT ABOVE 60C
==================== Disposal Considerations ====================
Waste Disposal Methods:SANITARY LANDFILL, FOLLOWING FED., STATE & LOCAL
CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|