=====================  Product Identification  =====================

MSDS NAME:TT-P-650C TYPE 1
NIIN:00-754-2610
MSDS Number: BFNMT
=== Responsible Party ===
Company:CON-LUX COATINGS INC.
Emergency Phone Num:201-287-4000
CAGE:60189
=== Contractor Identification ===
Company:CON-LUX COATINGS INC
Address:226 TALMADGE RD
Box:847
City:EDISON
State:NJ
ZIP:08818-0847
Country:US
Phone:732-287-4000
CAGE:60189

=============  Composition/Information on Ingredients  =============

Name:NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

=====================  Hazards Identification  =====================

Effects of Overexposure:INHALATION OF VAPORS CAN IRRITATE RESPIRATORY
    TRACT.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:HOH

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID PROLONGED INHALATION OF VAPORS.VENTILATE
    AREA.CLEAN UP WITH ABSORBENT MATERIAL

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN RESTRICTED VENTILATION AREAS USE NIOSH
    APPROVED CHEM FILTER
Ventilation:PROVIDE GENERAL DILUTION OF LOCAL EXHAUST VENTILATION
Eye Protection:SAFETY EYE WEAR
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT WITH
    CONTAMINATED CLOTHING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:212/100
Vapor Pres:HOH
Vapor Density:HOH
Spec Gravity:1.23
Solubility in Water:INFINITE
Appearance and Odor:WHITE LIQUID MILD SWEET ODOR.
Percent Volatiles by Volume:70

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ANY MATERIAL WHICH REACTS VIOLENTLY WITH WATER
Hazardous Decomposition Products:CO,CO*2
Conditions to Avoid Polymerization:EXCESSIVE HEAT WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE LIQUID IN APPROVED EQUIPMENT.USE
    SANITARY LANDFILL IN ACCORDANCE WITH STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***