===================== Product Identification =====================
MSDS NAME:MOLYLUBE FLUID GEAR COMPOUND AW,NO.6865
NIIN:00-754-2556
MSDS Number: BFNLY
=== Responsible Party ===
Company:BEL-RAY COMPANY, INCORPORATED
Address:111 BOWMAN AVE
Box:526
City:FARMINGDALE
State:NJ
ZIP:07727
Country:US
Info Phone Num:201-938-2421
Emergency Phone Num:201 938 2421
Preparer's Name:CHERYL LEADENHAM
CAGE:KO301
=== Contractor Identification ===
Company:BEL-RAY COMPANY INC.
Address:1201 BOWMAN AVE
Box:526
City:FARMINGDALE
State:NJ
ZIP:07727
Country:US
Phone:732-938-2421
CAGE:12474
Company:BEL-RAY COMPANY,INC.
Box:526
CAGE:KO301
============= Composition/Information on Ingredients =============
Name:METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)
CAS:71-55-6
RTECS #:KJ2975000
Fraction by Wt: 12.0%
OSHA PEL:350 PPM/450 STEL
ACGIH TLV:350 PPM/450STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1
Name:MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS:8012-95-1
RTECS #:PY8030000
Fraction by Wt: 88.0%
Other REC Limits:5MG/CUM AS OIL MIST
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3/10 STEL;9192
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE:IRRITANT TO EYES AND SKIN,CNS
DEPRESSION,DERMATITIS,DIZZINESS,NAUSEA,VOMITING. CHRONIC:ANESTHETIC
EFFECTS.
Effects of Overexposure:ANESTHITIC EFFECTS MAY OCCUR WHEN EXPOSED TO
1000 PPM IN AIR FOR LONG INTERVALS;AS 1,1,1 TRICHLOROET
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS MAY BE
WORSEN.
======================= First Aid Measures =======================
First Aid:INH:IF BREATHING STOPS,GIVE ARTIFICIAL RESPIRATION,TREAT FOR
SHOCK; SKIN:WASH WITH SOAP AND WATER; EYE:FLUSH W/WATER.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:580F/304C
Extinguishing Media:CARBON DIOXIDE, FOAM
Fire Fighting Procedures:NOT REQD
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:SCOOP UP & REMOVE, WASH AWAY WITH PETROLEUM
SOLVENT
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL,DRY AND WELL-VENTILATED
AREA.KEP AWAY FROM HEAT,OPEN FLAMES.WASH THOROUGHLY AFTER EACH USE.
Other Precautions:NONE REQ'D
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE NEEDED IF THERE IS ADEQUATE VENTILATION.
Ventilation:NORMAL ROOM VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:AS REQUIRED
Other Protective Equipment:IMPERVIOUS CLOTHING
Work Hygienic Practices:AVOID CONTACT WITH SKIN & EYES;DO NOT USE
CONTAMINATED CLOTHES.
Supplemental Safety and Health
MSDS RECEIVED BY DGSC-SLM:MARCH 4, 1988.
================== Physical/Chemical Properties ==================
HCC:V6
Spec Gravity:1.15
Solubility in Water:INSOLUBLE
Appearance and Odor:LUBRICANT MIXTURE OF HIGH VISCOSITY.
Percent Volatiles by Volume:12.0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:WILL BURN IF EXPOSED TO OPEN FLAME
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH LOCAL,STATE
AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|