=====================  Product Identification  =====================

MSDS NAME:EA-934 PART B
NIIN:00-810-5414
Kit Part:Y
MSDS Number: BFQJD
=== Responsible Party ===
Company:DEXTER CORPORATION,HYSOL DIVISION
Address:2850 WILLOW PASS ROAD
Box:312
City:PITTSBURG
State:CA
ZIP:94565-3237
Country:US
Info Phone Num:415-687-4201
Emergency Phone Num:415-687-4201
CAGE:79436
=== Contractor Identification ===
Company:DEXTER CORP DEXTER ELECTRONIC MATERIALS
Address:15051 E DON JULIAN RD
Box:City:INDUSTRY
State:CA
ZIP:91746-1282
Country:US
Phone:626-968-6511
CAGE:79436
Company:DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address:2850 WILLOW PASS ROAD
Box:312
City:BAY POINT
State:CA
ZIP:94565-3299
Country:US
Phone:202-483-7616
CAGE:33564

=============  Composition/Information on Ingredients  =============

Name:DIETHYLENE TRIAMINE
CAS:111-40-0
RTECS #:IE1225000
Fraction by Wt: 13%
OSHA PEL:1 PPM
ACGIH TLV:S, 1 PPM; 9192

Name:NON-HAZARDOUS MATERIALS(TYPE NOT SPECIFIED)
Fraction by Wt: 87%

=====================  Hazards Identification  =====================

Effects of Overexposure:SKIN/EYES: CORROSIVE & CAN CAUSE CHEM. BURNS;
    INHAL:IRRITATING & CHEST DISCOMFORT & BRONCHIAL SYMPTM

=======================  First Aid Measures  =======================

First Aid:EYES/SKIN: FLUSH W/PLENTY OF WATER; WASH SKIN THOROUGHLY
    W/SOAP & WATER; FOR EYES, FLUSH IMMEDIATELY FOR 15 MINUTES & GET
    MEDICAL AID. INGESTION: GIVE WATER OR MILK IF SWALLOWED, DO NOT
    INDUCE VOMITIN G. GET MEDICAL AID.

=====================  Fire Fighting Measures  =====================

Flash Point:>200F/>93.3C
Extinguishing Media:DRY CHEMICALS,WATER SPRAY OR FOG, FOAM
Fire Fighting Procedures:WEAR SELF-CONTND.BRTHG APPART(SCBA)FIRE
    FIGHTNG CONF.SPACE
Unusual Fire/Explosion Hazard:DENSE SMOKE & TOXIC GASES MAY BE
    LIBERATED FROM HEAT OF FIRE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR PROTECTIVE CLOTHING,GLOVES, & SAFETY
    GLASSES; SCRAPE UP & TRANSFER TO METAL CONTAINER-WIPE UP REMAINING
    RESIDUE W/SOLVENTS,OBSERVING SOLVENT FLAMMABILITY CAUTIONS, OR USE
    DETERGENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP PRODUCT COOL IAW LABEL
    INSTRUCTIONS; DONOT HEAT MIXED ADHESIVE ABOVE 125F UNLESS CURING
    SURFACES TO BE BONDED; OBSERVE CAUTIONS OR HEAT BUILD-UP
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE; DO NOT HEAT MIXED
    ADHESIVE (>125F); FAILURE TO OBSERVE CAUTIONS MAY RESULT IN
    EXCESSIVE HEAT BUILD-UP WITH RELEASE OF TOXIC GASES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPRVD MASK FOR TOXIC DUSTS WHEN CURED
    PRODUCT DRY SANDED,ETC.
Ventilation:LOCAL EXHAUST: RECOMMENDED WHEN SANDING CURED
    PRODUCT;MECHAN
Protective Gloves:IMPERVIOUS TYPE
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:AS NEEDED TO PROTECT SKIN & CLOTHING
Supplemental Safety and Health
MSDS DATED: 4/85; SPEC: TY 1,CL 3;.  KEY1:B2.

==================  Physical/Chemical Properties  ==================

HCC:B2
Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:<1.
Vapor Density:NIL
Spec Gravity:0.96
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:AMBER LIQUID WITH AMMINICAL ODOR
Percent Volatiles by Volume:<1.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS,STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:MFR DOES NOT INDICATE ANY.
Hazardous Decomposition Products:CO, NO*X, ALDEHYDES, ACIDS &
    UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN & CURING AGENTS
    IN BATCHES (>) 1 LB.TOTAL

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF AS A HAZARDOUS WASTE IAW TO DOT
    HAZARD CLASS; IF ITEM DOES NOT MEET ANOTHER CLASS,DISPOSE OF AS
    ORM-E;DISPOSAL METHOD CAN BE LAND BURIAL OR CHEMICAL INCINERATION
    AS REGULATED BY ALL GOVERNM ENTAL AGENCIES;

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***