===================== Product Identification =====================
MSDS NAME:SCOTCHWELD 1469 EPOXY ADHESIVE
NIIN:00-810-5414
MSDS Number: BFQJB
=== Responsible Party ===
Company:3M COMPANY
Emergency Phone Num:612-733-1110 OP 55
CAGE:76381
=== Contractor Identification ===
Company:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963
Company:MINNESOTA MINING AND MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
============= Composition/Information on Ingredients =============
Name:EPICHLOROHYDRIN/BISPHENOL A EPOXY RESIN (ANSI CLASS II)
Fraction by Wt: 73%
Name:AMORPHOUS FUSED SILICA (WHEN COMBINED WITH CURATIVE- 27% OF
PRODUCT)
RTECS #:VV7320000
ACGIH TLV:20 MPPCF
Name:CURATIVE
===================== Hazards Identification =====================
Effects of Overexposure:EYE, SKIN & GASTROINTESTINAL IRRITATION.
POSSIBLE SKIN SENSITIZATION IN SOME INDIVDUALS.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH 10 MIN W/COPIOUS WATER. SKN: WASH W/SOAP & WATER.
LAUNDER CONTAM CLOTHING BEFORE REUSE. INGES, INHL: NO ACTION
INDICATED.
===================== Fire Fighting Measures =====================
Flash Point:>200F; 93C
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USE SCBA WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:COLLECT SPILLED MATERIAL. PLACE IN METAL
CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID EYE & SKN CONTACT. AVOID INHL &
EYE CONTACT WITH DUST & PARTICULATES FROM GRINDING OR SAWING OF
CURED PRODUCT.
Other Precautions:AVOID EYE CONTACT, PROLONGED SKIN CONTACT &
INHALATION OF DUST FROM GRINDING CURED ADHESIVE.
============= Exposure Controls/Personal Protection =============
Ventilation:EXHAUST ALL CURING OVENS TO OUTDOORS
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:USE DUST MASK WHEN GRINDING CURED PRODUCT.
Supplemental Safety and Health
UPDATE PER 3M MSDS (OSHA) 1 NOV 85, DOC # 1031236. 3M GENERIC
ID#:62-1469-XXXX-X. FORMER P/N:SCOTCHWELD EC-1469 STRUCTURAL
ADHESIVE.
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:1.2
Solubility in Water:NIL
Appearance and Odor:VISCOUS CREAM COLORED LIQUID W/ LOW ODOR.
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO*2, SMOKE WHEN SUBJECTED TO
EXCESSIVE HEAT OR FLAME.
==================== Disposal Considerations ====================
Waste Disposal Methods:MANUFACTURER RECOMMEND COMMERCIAL INCINERATION
WITH DESTRUCTION & REMOVAL EFFICIENCY AT 100%. OTHERWISE, DISPOSE
IN LANDFILL OR MUNICIPAL REFUSE INCINERATOR. DISPOSAL METHODS MUST
BE IAW FEDERAL, STAT E & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|