=====================  Product Identification  =====================

MSDS NAME:EPOLITE 4015
NIIN:00-810-1513
Kit Part:Y
MSDS Number: BFQHK
=== Responsible Party ===
Company:HEXCEL CORPORATION;CHEMICAL PRODUCTS DIVISION
Address:20701-NORDHOFF STREET
Box:2197
City:CHATSWORTH
State:CA
ZIP:91311-5924
Country:US
Info Phone Num:800-433-5072 0R 800-367-7527 IN CAL
Emergency Phone Num:818-882-3022
Preparer's Name:P.W. CUTHBURT
CAGE:01490
=== Contractor Identification ===
Company:HEXCEL CORPORATION;CHEMICAL PRODUCTS DIVISION
Address:20701-NORDHOFF STREET
Box:2197
City:CHATSWORTH
State:CA
ZIP:91311-5924
Country:US
Phone:818-882-3022
CAGE:01490

=============  Composition/Information on Ingredients  =============

Name:MIXED FATTY ACID AMIDO AMINE
CAS:6844-38-3
Fraction by Wt: 55-70%
Other REC Limits:NONE SPECIFIED

Name:NONYLPHENOL (ALKYL PHENOL)
CAS:25154-52-3
RTECS #:SM5600000
Fraction by Wt: 25-38%
Other REC Limits:NONE SPECIFIED

Name:TRIETHYLENE TETRAMINE
CAS:112-24-3
RTECS #:YE6650000
Fraction by Wt: 6-14%
Other REC Limits:1 PPM SKIN

Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: TRACE
Other REC Limits:NONE SPECIFIED
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3; 9192

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:ACUTE:IRRITATION OF EYES,SKIN AND
    RESPIRATORY TRACT;SENSITIZATION OR DERMATITIS IN SENSITIVE PERSONS.
    CHRONIC:DERMATITIS IN SENSITIVE PERSONS.
Effects of Overexposure:MAY CAUSE IRRITATION,SENSITIZATION ORDERMATITIS
    IN SENSITIVE PERSONS.
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS MAY BE
    WORSEN.

=======================  First Aid Measures  =======================

First Aid:INHAL:RMV TO FRESH AIR. SKIN:WASH W/SOAP & WATER. EYES:FLUSH
    WITH WATER FOR 15 MIN. GET MED ATTN.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
    CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
    FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
    SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
    PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS SUCH AS CARBON
    MONOXIDE & DIOXIDE AND FUMES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB EXCESS MATL IN COMBUST ABSORB. WASH
    AWAY RESIDUE W/DETERGENT & WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL DRY AREA AWAY FM OPEN
    FLAME, KEEP CONTAINER CLOSED WHEN NOT IN USE. PROTECT FM DAMAGE.
Other Precautions:AVOID CONTACT W/EYES, SKIN OR CLOTHING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
    VAPORS/MIST IF CONCENTRATION IS HIGH OR POOR VENTILATION.
Ventilation:MECHANICAL PREFERRED
Protective Gloves:COT LINED RUBBR
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:RUBBER APRON
Work Hygienic Practices:AVOID CONTACT WITH EYES AND SKIN:DO NOT USE
    CONTAMINATED CLOTHES;WASH AFTER EACH USE;DO NOT EAT,DRINK OR SMOKE
    IN WORK A
Supplemental Safety and Health
MSDS REVISED DATE IS JUNE 13,1986;THIS DESCRIBES PART B OF TWO PART
    KIT;SEE PART INDICATOR A (HARDENER).KEY1:C2.

==================  Physical/Chemical Properties  ==================

HCC:N1
Vapor Pres:<.01
Spec Gravity:1.02
Solubility in Water:PARTLY SOLUBLE
Appearance and Odor:BLACK COLOR, AMMONICEAL ODOR
Percent Volatiles by Volume:NONE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACDS AND CHLORINATED HYDROCARBONS.
Stability Condition to Avoid:HIGH TEMPERATURES, SPARKS, AND OPEN
    FLAMES, MOISTURE, CROSS CONTAMINATION OF PART A AND PART B.
Hazardous Decomposition Products:CO AND CO*2,AMMONIA.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONTAIN IN SEALED CONTAINERS THEN USE STANDARD
    INDUSTRIAL WASTE DISPOSAL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***